From: Seunghun Lee <waydi1@gmail.com>
To: gregkh@linuxfoundation.org
Cc: driverdev-devel@linuxdriverproject.org,
linux-kernel@vger.kernel.org, Seunghun Lee <waydi1@gmail.com>,
Lidza Louina <lidza.louina@gmail.com>,
Mark Hounschell <markh@compro.net>
Subject: [PATCH] staging: dgnc: split two assignments into the two assignments on two lines.
Date: Mon, 1 Sep 2014 22:46:59 +0900 [thread overview]
Message-ID: <1409579219-5956-1-git-send-email-waydi1@gmail.com> (raw)
split two assignments into the two assignments on two lines.
CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
---
drivers/staging/dgnc/TODO | 2 --
drivers/staging/dgnc/dgnc_cls.c | 15 ++++++++++-----
drivers/staging/dgnc/dgnc_driver.c | 10 ++++++----
drivers/staging/dgnc/dgnc_neo.c | 16 +++++++++++-----
drivers/staging/dgnc/dgnc_tty.c | 9 ++++++---
5 files changed, 33 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/dgnc/TODO b/drivers/staging/dgnc/TODO
index d2828c7..22adff1 100644
--- a/drivers/staging/dgnc/TODO
+++ b/drivers/staging/dgnc/TODO
@@ -1,6 +1,4 @@
* checkpatch fixes
-* split two assignments into the two assignments on two lines;
- don't use two equals signs
* remove unecessary comments
* remove unecessary error messages. Example kzalloc() has its
own error message. Adding an extra one is useless.
diff --git a/drivers/staging/dgnc/dgnc_cls.c b/drivers/staging/dgnc/dgnc_cls.c
index 84b1377..0393d6d 100644
--- a/drivers/staging/dgnc/dgnc_cls.c
+++ b/drivers/staging/dgnc/dgnc_cls.c
@@ -493,9 +493,12 @@ static void cls_param(struct tty_struct *tty)
* If baud rate is zero, flush queues, and set mval to drop DTR.
*/
if ((ch->ch_c_cflag & (CBAUD)) == 0) {
- ch->ch_r_head = ch->ch_r_tail = 0;
- ch->ch_e_head = ch->ch_e_tail = 0;
- ch->ch_w_head = ch->ch_w_tail = 0;
+ ch->ch_r_head = 0;
+ ch->ch_r_tail = 0;
+ ch->ch_e_head = 0;
+ ch->ch_e_tail = 0;
+ ch->ch_w_head = 0;
+ ch->ch_w_tail = 0;
cls_flush_uart_write(ch);
cls_flush_uart_read(ch);
@@ -627,7 +630,8 @@ static void cls_param(struct tty_struct *tty)
break;
}
- ier = uart_ier = readb(&ch->ch_cls_uart->ier);
+ uart_ier = readb(&ch->ch_cls_uart->ier);
+ ier = uart_ier;
uart_lcr = readb(&ch->ch_cls_uart->lcr);
if (baud == 0)
@@ -915,7 +919,8 @@ static void cls_copy_data_from_uart_to_queue(struct channel_t *ch)
* I hope thats okay with everyone? Yes? Good.
*/
while (qleft < 1) {
- ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK;
+ tail = (tail + 1) & RQUEUEMASK;
+ ch->ch_r_tail = tail;
ch->ch_err_overrun++;
qleft++;
}
diff --git a/drivers/staging/dgnc/dgnc_driver.c b/drivers/staging/dgnc/dgnc_driver.c
index 11bed56..2cc02c9 100644
--- a/drivers/staging/dgnc/dgnc_driver.c
+++ b/drivers/staging/dgnc/dgnc_driver.c
@@ -410,14 +410,16 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
unsigned long flags;
/* get the board structure and prep it */
- brd = dgnc_Board[dgnc_NumBoards] =
- kzalloc(sizeof(*brd), GFP_KERNEL);
+ dgnc_Board[dgnc_NumBoards] = kzalloc(sizeof(*brd), GFP_KERNEL);
+ brd = dgnc_Board[dgnc_NumBoards];
+
if (!brd)
return -ENOMEM;
/* make a temporary message buffer for the boot messages */
- brd->msgbuf = brd->msgbuf_head =
- kzalloc(sizeof(u8) * 8192, GFP_KERNEL);
+ brd->msgbuf_head = kzalloc(sizeof(u8) * 8192, GFP_KERNEL);
+ brd->msgbuf = brd->msgbuf_head;
+
if (!brd->msgbuf) {
kfree(brd);
return -ENOMEM;
diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c
index 920ce2d..d6f4a80 100644
--- a/drivers/staging/dgnc/dgnc_neo.c
+++ b/drivers/staging/dgnc/dgnc_neo.c
@@ -626,9 +626,12 @@ static void neo_param(struct tty_struct *tty)
* If baud rate is zero, flush queues, and set mval to drop DTR.
*/
if ((ch->ch_c_cflag & (CBAUD)) == 0) {
- ch->ch_r_head = ch->ch_r_tail = 0;
- ch->ch_e_head = ch->ch_e_tail = 0;
- ch->ch_w_head = ch->ch_w_tail = 0;
+ ch->ch_r_head = 0;
+ ch->ch_r_tail = 0;
+ ch->ch_e_head = 0;
+ ch->ch_e_tail = 0;
+ ch->ch_w_head = 0;
+ ch->ch_w_tail = 0;
neo_flush_uart_write(ch);
neo_flush_uart_read(ch);
@@ -754,7 +757,9 @@ static void neo_param(struct tty_struct *tty)
break;
}
- ier = uart_ier = readb(&ch->ch_neo_uart->ier);
+ uart_ier = readb(&ch->ch_neo_uart->ier);
+ ier = uart_ier;
+
uart_lcr = readb(&ch->ch_neo_uart->lcr);
if (baud == 0)
@@ -1285,7 +1290,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
* I hope thats okay with everyone? Yes? Good.
*/
while (qleft < 1) {
- ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK;
+ tail = (tail + 1) & RQUEUEMASK;
+ ch->ch_r_tail = tail;
ch->ch_err_overrun++;
qleft++;
}
diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
index afb20a3..5cbec57 100644
--- a/drivers/staging/dgnc/dgnc_tty.c
+++ b/drivers/staging/dgnc/dgnc_tty.c
@@ -1293,9 +1293,12 @@ static int dgnc_tty_open(struct tty_struct *tty, struct file *file)
/*
* Flush input queues.
*/
- ch->ch_r_head = ch->ch_r_tail = 0;
- ch->ch_e_head = ch->ch_e_tail = 0;
- ch->ch_w_head = ch->ch_w_tail = 0;
+ ch->ch_r_head = 0;
+ ch->ch_r_tail = 0;
+ ch->ch_e_head = 0;
+ ch->ch_e_tail = 0;
+ ch->ch_w_head = 0;
+ ch->ch_w_tail = 0;
brd->bd_ops->flush_uart_write(ch);
brd->bd_ops->flush_uart_read(ch);
--
1.7.9.5
reply other threads:[~2014-09-01 13:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409579219-5956-1-git-send-email-waydi1@gmail.com \
--to=waydi1@gmail.com \
--cc=driverdev-devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=lidza.louina@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=markh@compro.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®