From: navin patidar <navin.patidar@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
navin patidar <navin.patidar@gmail.com>
Subject: [PATCH 2/8] staging: rtl8188eu: Hal8188EPwrSeq.c: fix lines over 80 characters.
Date: Mon, 1 Sep 2014 21:13:37 +0530 [thread overview]
Message-ID: <1409586223-5915-2-git-send-email-navin.patidar@gmail.com> (raw)
In-Reply-To: <1409586223-5915-1-git-send-email-navin.patidar@gmail.com>
Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
drivers/staging/rtl8188eu/hal/Hal8188EPwrSeq.c | 46 ++++++++++++++++--------
1 file changed, 31 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/Hal8188EPwrSeq.c b/drivers/staging/rtl8188eu/hal/Hal8188EPwrSeq.c
index fc23bf1..4c29e63 100644
--- a/drivers/staging/rtl8188eu/hal/Hal8188EPwrSeq.c
+++ b/drivers/staging/rtl8188eu/hal/Hal8188EPwrSeq.c
@@ -25,61 +25,77 @@
drivers should parse below arrays and do the corresponding actions
*/
/* 3 Power on Array */
-struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_CARDEMU_TO_ACT
RTL8188E_TRANS_END
};
/* 3Radio off Array */
-struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_ACT_TO_CARDEMU
RTL8188E_TRANS_END
};
/* 3Card Disable Array */
-struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_ACT_TO_CARDEMU
- RTL8188E_TRANS_CARDEMU_TO_CARDDIS
- RTL8188E_TRANS_END
+struct wl_pwr_cfg rtl8188E_card_disable_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
+ RTL8188E_TRANS_ACT_TO_CARDEMU
+ RTL8188E_TRANS_CARDEMU_TO_CARDDIS
+ RTL8188E_TRANS_END
};
/* 3 Card Enable Array */
-struct wl_pwr_cfg rtl8188E_card_enable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_CARDDIS_TO_CARDEMU
- RTL8188E_TRANS_CARDEMU_TO_ACT
- RTL8188E_TRANS_END
+struct wl_pwr_cfg rtl8188E_card_enable_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
+ RTL8188E_TRANS_CARDDIS_TO_CARDEMU
+ RTL8188E_TRANS_CARDEMU_TO_ACT
+ RTL8188E_TRANS_END
};
/* 3Suspend Array */
-struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_ACT_TO_CARDEMU
RTL8188E_TRANS_CARDEMU_TO_SUS
RTL8188E_TRANS_END
};
/* 3 Resume Array */
-struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_SUS_TO_CARDEMU
RTL8188E_TRANS_CARDEMU_TO_ACT
RTL8188E_TRANS_END
};
/* 3HWPDN Array */
-struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_ACT_TO_CARDEMU
RTL8188E_TRANS_CARDEMU_TO_PDN
RTL8188E_TRANS_END
};
/* 3 Enter LPS */
-struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
/* FW behavior */
RTL8188E_TRANS_ACT_TO_LPS
RTL8188E_TRANS_END
};
/* 3 Leave LPS */
-struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS +
+ RTL8188E_TRANS_END_STEPS] = {
/* FW behavior */
RTL8188E_TRANS_LPS_TO_ACT
RTL8188E_TRANS_END
--
1.7.10.4
next prev parent reply other threads:[~2014-09-01 15:44 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-01 15:43 [PATCH 1/8] staging: rtl8188eu: Rework function HalPwrSeqCmdParsing() navin patidar
2014-09-01 15:43 ` navin patidar [this message]
2014-09-01 15:43 ` [PATCH 3/8] staging: rtl8188eu: HalPwrSeqCmd.h: Remove unnecessary comments navin patidar
2014-09-01 15:43 ` [PATCH 4/8] staging: rtl8188eu: Rename Hal8188EPwrSeq.c to pwrseq.c navin patidar
2014-09-01 15:43 ` [PATCH 5/8] staging: rtl8188eu: Rename HalPwrSeqCmd.c to pwrseqcmd.c navin patidar
2014-09-01 15:43 ` [PATCH 6/8] staging: rtl8188eu: Rename HalPwrSeqCmd.h to pwrseqcmd.h navin patidar
2014-09-01 15:43 ` [PATCH 7/8] staging: rtl8188eu: Hal8188EPwrSeq.h: fix lines over 80 char navin patidar
2014-09-01 15:43 ` [PATCH 8/8] staging: rtl8188eu: Rename Hal8188EPwrSeq.h to pwrseq.h navin patidar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409586223-5915-2-git-send-email-navin.patidar@gmail.com \
--to=navin.patidar@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome