From: Greg Donald <gdonald@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Xenia Ragiadakou <burzalodowa@gmail.com>,
Ana Rey <anarey@gmail.com>,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Chaitanya Hazarey <c@24.io>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Cc: Greg Donald <gdonald@gmail.com>
Subject: [PATCH] drivers: staging: rtl8192u: Fix "space required before that '*'" errors
Date: Thu, 4 Sep 2014 15:37:41 -0500 [thread overview]
Message-ID: <1409863061-15127-1-git-send-email-gdonald@gmail.com> (raw)
Fix checkpatch.pl "space required before that '*'" errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211.h | 6 +++---
drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h | 2 +-
drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h | 8 ++++----
drivers/staging/rtl8192u/r8192U_hw.h | 2 +-
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index 125c5ab..3a96a9c 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -1211,7 +1211,7 @@ typedef union _frameqos {
u16 reserved:1;
u16 txop:8;
}field;
-}frameqos,*pframeqos;
+} frameqos, *pframeqos;
/* SWEEP TABLE ENTRIES NUMBER*/
#define MAX_SWEEP_TAB_ENTRIES 42
@@ -1648,7 +1648,7 @@ typedef struct _bandwidth_autoswitch {
long threshold_40Mhzto20Mhz;
bool bforced_tx20Mhz;
bool bautoswitch_enable;
-}bandwidth_autoswitch,*pbandwidth_autoswitch;
+} bandwidth_autoswitch, *pbandwidth_autoswitch;
//added by amy for order
@@ -1745,7 +1745,7 @@ typedef struct _RT_POWER_SAVE_CONTROL {
//
bool bLeisurePs;
-}RT_POWER_SAVE_CONTROL,*PRT_POWER_SAVE_CONTROL;
+} RT_POWER_SAVE_CONTROL, *PRT_POWER_SAVE_CONTROL;
typedef u32 RT_RF_CHANGE_SOURCE;
#define RF_CHANGE_BY_SW BIT31
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index 2b82835..c3aabba 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -53,7 +53,7 @@ typedef enum _HT_MCS_RATE{
HT_MCS14 = 0x00004000,
HT_MCS15 = 0x00008000,
// Do not define MCS32 here although 8190 support MCS32
-}HT_MCS_RATE,*PHT_MCS_RATE;
+} HT_MCS_RATE, *PHT_MCS_RATE;
//
// Represent Channel Width in HT Capabilities
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
index f2d52ca..9fbce91 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
@@ -66,7 +66,7 @@ typedef u32 QOS_MODE, *PQOS_MODE;
typedef enum _ACK_POLICY{
eAckPlc0_ACK = 0x00,
eAckPlc1_NoACK = 0x01,
-}ACK_POLICY,*PACK_POLICY;
+} ACK_POLICY, *PACK_POLICY;
#define WMM_PARAM_ELEMENT_SIZE (8+(4*AC_PARAM_SIZE))
@@ -276,7 +276,7 @@ typedef union _AC_PARAM{
typedef enum _QOS_ELE_SUBTYPE{
QOSELE_TYPE_INFO = 0x00, // 0x00: Information element
QOSELE_TYPE_PARAM = 0x01, // 0x01: parameter element
-}QOS_ELE_SUBTYPE,*PQOS_ELE_SUBTYPE;
+} QOS_ELE_SUBTYPE, *PQOS_ELE_SUBTYPE;
//
@@ -288,7 +288,7 @@ typedef enum _DIRECTION_VALUE{
DIR_DOWN = 1, // 0x01 // DownLink
DIR_DIRECT = 2, // 0x10 // DirectLink
DIR_BI_DIR = 3, // 0x11 // Bi-Direction
-}DIRECTION_VALUE,*PDIRECTION_VALUE;
+} DIRECTION_VALUE, *PDIRECTION_VALUE;
//
@@ -363,7 +363,7 @@ typedef enum _ACM_METHOD{
eAcmWay0_SwAndHw = 0, // By SW and HW.
eAcmWay1_HW = 1, // By HW.
eAcmWay2_SW = 2, // By SW.
-}ACM_METHOD,*PACM_METHOD;
+} ACM_METHOD, *PACM_METHOD;
typedef struct _ACM{
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
index dd07a73..a93694f 100644
--- a/drivers/staging/rtl8192u/r8192U_hw.h
+++ b/drivers/staging/rtl8192u/r8192U_hw.h
@@ -24,7 +24,7 @@ typedef enum _VERSION_819xU{
VERSION_819xU_A, // A-cut
VERSION_819xU_B, // B-cut
VERSION_819xU_C,// C-cut
-}VERSION_819xU,*PVERSION_819xU;
+} VERSION_819xU, *PVERSION_819xU;
//added for different RF type
typedef enum _RT_RF_TYPE_DEF
{
--
1.9.1
reply other threads:[~2014-09-04 20:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409863061-15127-1-git-send-email-gdonald@gmail.com \
--to=gdonald@gmail.com \
--cc=anarey@gmail.com \
--cc=burzalodowa@gmail.com \
--cc=c@24.io \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®