From: Tanmay Inamdar <tinamdar@apm.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Arnd Bergmann <arnd@arndb.de>,
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Rob Landley <rob@landley.net>, Liviu Dudau <liviu.dudau@arm.com>
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, patches@apm.com, jcm@redhat.com,
Tanmay Inamdar <tinamdar@apm.com>
Subject: [PATCH v6 2/4] arm64: dts: APM X-Gene PCIe device tree nodes
Date: Fri, 5 Sep 2014 17:25:41 -0700 [thread overview]
Message-ID: <1409963143-11951-3-git-send-email-tinamdar@apm.com> (raw)
In-Reply-To: <1409963143-11951-1-git-send-email-tinamdar@apm.com>
This patch adds the device tree nodes for APM X-Gene PCIe controller and
PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts
nodes are added.
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
---
arch/arm64/boot/dts/apm-mustang.dts | 8 ++
arch/arm64/boot/dts/apm-storm.dtsi | 160 ++++++++++++++++++++++++++++++++++++
2 files changed, 168 insertions(+)
diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts
index b2f5622..f649000 100644
--- a/arch/arm64/boot/dts/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm-mustang.dts
@@ -25,6 +25,14 @@
};
};
+&pcie0clk {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
&serial0 {
status = "ok";
};
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index c0aceef..e8a32a2 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -269,6 +269,166 @@
enable-mask = <0x2>;
clock-output-names = "rtcclk";
};
+
+ pcie0clk: pcie0clk@1f2bc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2bc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie0clk";
+ };
+
+ pcie1clk: pcie1clk@1f2cc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2cc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie1clk";
+ };
+
+ pcie2clk: pcie2clk@1f2dc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2dc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie2clk";
+ };
+
+ pcie3clk: pcie3clk@1f50c000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f50c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie3clk";
+ };
+
+ pcie4clk: pcie4clk@1f51c000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f51c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie4clk";
+ };
+ };
+
+ pcie0: pcie@1f2b0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ clocks = <&pcie0clk 0>;
+ };
+
+ pcie1: pcie@1f2c0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */
+ 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
+ clocks = <&pcie1clk 0>;
+ };
+
+ pcie2: pcie@1f2d0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */
+ 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
+ clocks = <&pcie2clk 0>;
+ };
+
+ pcie3: pcie@1f500000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */
+ 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
+ clocks = <&pcie3clk 0>;
+ };
+
+ pcie4: pcie@1f510000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */
+ 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
+ clocks = <&pcie4clk 0>;
};
serial0: serial@1c020000 {
--
1.9.1
next prev parent reply other threads:[~2014-09-06 0:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-06 0:25 [PATCH v6 0/4] APM X-Gene PCIe host controller Tanmay Inamdar
2014-09-06 0:25 ` [PATCH v6 1/4] pci:host: APM X-Gene PCIe controller driver Tanmay Inamdar
2014-09-06 0:25 ` Tanmay Inamdar [this message]
2014-09-06 0:25 ` [PATCH v6 3/4] dt-bindings: pci: xgene pcie device tree bindings Tanmay Inamdar
2014-09-06 0:25 ` [PATCH v6 4/4] MAINTAINERS: entry for APM X-Gene PCIe host driver Tanmay Inamdar
2014-09-06 14:17 ` [PATCH v6 0/4] APM X-Gene PCIe host controller Bjorn Helgaas
2014-09-08 13:59 ` Liviu Dudau
2014-09-08 17:56 ` Tanmay Inamdar
2014-09-16 16:20 ` Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409963143-11951-3-git-send-email-tinamdar@apm.com \
--to=tinamdar@apm.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=jcm@redhat.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liviu.dudau@arm.com \
--cc=patches@apm.com \
--cc=rob@landley.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®