[PATCH] hwmon, fam15h_power: Add support for two more processors

[Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>]

Fam16h,M30h(Mullins) and Fam15hM30h(Kaveri) processors can
report 'power_crit' value. So, adding their respective device ids.

Also, according to BKDGs, the 'TdpRunAvgAccCap' that show_power()
uses is valid only on Fam15h, Models 0x0-0xF. On all other processors
the field is 'Reserved'. So, return error if we are on any other family/model.

Impact on lm-sensors is minimal. On such families, instead of reporting
Current power value as '0', we now have:
power1:           N/A

Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
---
 drivers/hwmon/fam15h_power.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 4a7cbfa..b69bf7d 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -57,6 +57,10 @@ static ssize_t show_power(struct device *dev,
 	struct fam15h_power_data *data = dev_get_drvdata(dev);
 	struct pci_dev *f4 = data->pdev;
 
+	/* The value TdpRunAvgAccCap is valid only on F15h, Models 0x0-0xF */
+	if (boot_cpu_data.x86 != 0x15 || boot_cpu_data.x86_model > 0x0)
+		return -ENOSYS;
+
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
 				  REG_TDP_RUNNING_AVERAGE, &val);
 	running_avg_capture = (val >> 4) & 0x3fffff;
@@ -216,7 +220,9 @@ static int fam15h_power_probe(struct pci_dev *pdev,
 
 static const struct pci_device_id fam15h_power_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);
-- 
2.0.3