From: Ming Lei <ming.lei@canonical.com>
To: Jens Axboe <axboe@kernel.dk>, linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>, Ming Lei <ming.lei@canonical.com>
Subject: [PATCH v2 9/9] blk-mq: support per-distpatch_queue flush machinery
Date: Fri, 12 Sep 2014 22:47:33 +0800 [thread overview]
Message-ID: <1410533253-8045-10-git-send-email-ming.lei@canonical.com> (raw)
In-Reply-To: <1410533253-8045-1-git-send-email-ming.lei@canonical.com>
This patch supports to run one single flush machinery for
each blk-mq dispatch queue, so that:
- current init_request and exit_request callbacks can
cover flush request too, then the buggy copying way of
initializing flush request's pdu can be fixed
- flushing performance gets improved in case of multi hw-queue
In fio sync write test over virtio-blk(4 hw queues, ioengine=sync,
iodepth=64, numjobs=4, bs=4K), it is observed that througput gets
increased a lot over my test environment:
- throughput: +70% in case of virtio-blk over null_blk
- throughput: +30% in case of virtio-blk over SSD image
The multi virtqueue feature isn't merged to QEMU yet, and patches for
the feature can be found in below tree:
git://kernel.ubuntu.com/ming/qemu.git v2.1.0-mq.3
And simply passing 'num_queues=4 vectors=5' should be enough to
enable multi queue(quad queue) feature for QEMU virtio-blk.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
---
block/blk-flush.c | 18 +++++++++---------
block/blk-mq.c | 24 ++++++++++++++++++++++++
block/blk.h | 15 ++++++++++++++-
include/linux/blk-mq.h | 2 ++
4 files changed, 49 insertions(+), 10 deletions(-)
diff --git a/block/blk-flush.c b/block/blk-flush.c
index f8cc690..3da32ca 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -482,23 +482,23 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
}
EXPORT_SYMBOL(blkdev_issue_flush);
-static struct blk_flush_queue *blk_alloc_flush_queue(
- struct request_queue *q)
+struct blk_flush_queue *blk_alloc_flush_queue(struct request_queue *q,
+ struct blk_mq_hw_ctx *hctx, int cmd_size)
{
struct blk_flush_queue *fq;
int rq_sz = sizeof(struct request);
+ int node = hctx ? hctx->numa_node : NUMA_NO_NODE;
- fq = kzalloc(sizeof(*fq), GFP_KERNEL);
+ fq = kzalloc_node(sizeof(*fq), GFP_KERNEL, node);
if (!fq)
goto fail;
- if (q->mq_ops) {
+ if (hctx) {
spin_lock_init(&fq->mq_flush_lock);
- rq_sz = round_up(rq_sz + q->tag_set->cmd_size,
- cache_line_size());
+ rq_sz = round_up(rq_sz + cmd_size, cache_line_size());
}
- fq->flush_rq = kzalloc(rq_sz, GFP_KERNEL);
+ fq->flush_rq = kzalloc_node(rq_sz, GFP_KERNEL, node);
if (!fq->flush_rq)
goto fail_rq;
@@ -514,7 +514,7 @@ static struct blk_flush_queue *blk_alloc_flush_queue(
return ERR_PTR(-ENOMEM);
}
-static void blk_free_flush_queue(struct blk_flush_queue *fq)
+void blk_free_flush_queue(struct blk_flush_queue *fq)
{
kfree(fq->flush_rq);
kfree(fq);
@@ -522,7 +522,7 @@ static void blk_free_flush_queue(struct blk_flush_queue *fq)
int blk_init_flush(struct request_queue *q)
{
- q->fq = blk_alloc_flush_queue(q);
+ q->fq = blk_alloc_flush_queue(q, NULL, 0);
if (IS_ERR(q->fq))
return PTR_ERR(q->fq);
diff --git a/block/blk-mq.c b/block/blk-mq.c
index afb0dfe..5a0da6d 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1531,12 +1531,20 @@ static void blk_mq_exit_hctx(struct request_queue *q,
struct blk_mq_tag_set *set,
struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
{
+ unsigned flush_start_tag = set->queue_depth;
+
blk_mq_tag_idle(hctx);
+ if (set->ops->exit_request)
+ set->ops->exit_request(set->driver_data,
+ hctx->fq->flush_rq, hctx_idx,
+ flush_start_tag + hctx_idx);
+
if (set->ops->exit_hctx)
set->ops->exit_hctx(hctx, hctx_idx);
blk_mq_unregister_cpu_notifier(&hctx->cpu_notifier);
+ blk_free_flush_queue(hctx->fq);
kfree(hctx->ctxs);
blk_mq_free_bitmap(&hctx->ctx_map);
}
@@ -1571,6 +1579,7 @@ static int blk_mq_init_hctx(struct request_queue *q,
struct blk_mq_hw_ctx *hctx, unsigned hctx_idx)
{
int node;
+ unsigned flush_start_tag = set->queue_depth;
node = hctx->numa_node;
if (node == NUMA_NO_NODE)
@@ -1609,8 +1618,23 @@ static int blk_mq_init_hctx(struct request_queue *q,
set->ops->init_hctx(hctx, set->driver_data, hctx_idx))
goto free_bitmap;
+ hctx->fq = blk_alloc_flush_queue(q, hctx, set->cmd_size);
+ if (IS_ERR(hctx->fq))
+ goto exit_hctx;
+
+ if (set->ops->init_request &&
+ set->ops->init_request(set->driver_data,
+ hctx->fq->flush_rq, hctx_idx,
+ flush_start_tag + hctx_idx, node))
+ goto free_fq;
+
return 0;
+ free_fq:
+ kfree(hctx->fq);
+ exit_hctx:
+ if (set->ops->exit_hctx)
+ set->ops->exit_hctx(hctx, hctx_idx);
free_bitmap:
blk_mq_free_bitmap(&hctx->ctx_map);
free_ctxs:
diff --git a/block/blk.h b/block/blk.h
index 30f8033..9f39b0d 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -2,6 +2,8 @@
#define BLK_INTERNAL_H
#include <linux/idr.h>
+#include <linux/blk-mq.h>
+#include "blk-mq.h"
/* Amount of time in which a process may batch requests */
#define BLK_BATCH_TIME (HZ/50UL)
@@ -31,7 +33,15 @@ extern struct ida blk_queue_ida;
static inline struct blk_flush_queue *blk_get_flush_queue(
struct request_queue *q, struct blk_mq_ctx *ctx)
{
- return q->fq;
+ struct blk_mq_hw_ctx *hctx;
+
+ if (!q->mq_ops)
+ return q->fq;
+
+ WARN_ON(!ctx);
+ hctx = q->mq_ops->map_queue(q, ctx->cpu);
+
+ return hctx->fq;
}
static inline void __blk_get_queue(struct request_queue *q)
@@ -41,6 +51,9 @@ static inline void __blk_get_queue(struct request_queue *q)
int blk_init_flush(struct request_queue *q);
void blk_exit_flush(struct request_queue *q);
+struct blk_flush_queue *blk_alloc_flush_queue(struct request_queue *q,
+ struct blk_mq_hw_ctx *hctx, int cmd_size);
+void blk_free_flush_queue(struct blk_flush_queue *q);
int blk_init_rl(struct request_list *rl, struct request_queue *q,
gfp_t gfp_mask);
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index a1e31f2..1f3c523 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -4,6 +4,7 @@
#include <linux/blkdev.h>
struct blk_mq_tags;
+struct blk_flush_queue;
struct blk_mq_cpu_notifier {
struct list_head list;
@@ -34,6 +35,7 @@ struct blk_mq_hw_ctx {
struct request_queue *queue;
unsigned int queue_num;
+ struct blk_flush_queue *fq;
void *driver_data;
--
1.7.9.5
next prev parent reply other threads:[~2014-09-12 14:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-12 14:47 [PATCH v2 0/9] block: " Ming Lei
2014-09-12 14:47 ` [PATCH v2 1/9] blk-mq: allocate flush_rq in blk_mq_init_flush() Ming Lei
2014-09-12 14:47 ` [PATCH v2 2/9] block: introduce blk_init_flush and its pair Ming Lei
2014-09-12 15:18 ` Jens Axboe
2014-09-12 15:41 ` Ming Lei
2014-09-12 15:45 ` Jens Axboe
2014-09-12 15:59 ` Ming Lei
2014-09-12 14:47 ` [PATCH v2 3/9] block: move flush initialization to blk_flush_init Ming Lei
2014-09-12 14:47 ` [PATCH v2 4/9] block: avoid to use q->flush_rq directly Ming Lei
2014-09-12 14:47 ` [PATCH v2 5/9] block: introduce blk_flush_queue to drive flush machinery Ming Lei
2014-09-12 14:47 ` [PATCH v2 6/9] block: flush: avoid to figure out flush queue unnecessarily Ming Lei
2014-09-12 14:47 ` [PATCH v2 7/9] block: introduce 'blk_mq_ctx' parameter to blk_get_flush_queue Ming Lei
2014-09-12 14:47 ` [PATCH v2 8/9] blk-mq: handle failure path for initializing hctx Ming Lei
2014-09-12 15:19 ` Jens Axboe
2014-09-12 14:47 ` Ming Lei [this message]
2014-09-12 15:20 ` [PATCH v2 9/9] blk-mq: support per-distpatch_queue flush machinery Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410533253-8045-10-git-send-email-ming.lei@canonical.com \
--to=ming.lei@canonical.com \
--cc=axboe@kernel.dk \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®