From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@fb.com>
Cc: Robert Elliott <elliott@hp.com>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/6] blk-mq: call blk_mq_start_request from ->queue_rq
Date: Sat, 13 Sep 2014 16:40:09 -0700 [thread overview]
Message-ID: <1410651613-1993-3-git-send-email-hch@lst.de> (raw)
In-Reply-To: <1410651613-1993-1-git-send-email-hch@lst.de>
When we call blk_mq_start_request from the core blk-mq code before calling into
->queue_rq there is a racy window where the timeout handler can hit before we've
fully set up the driver specific part of the command.
Move the call to blk_mq_start_request into the driver so the driver can start
the request only once it is fully set up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
block/blk-mq.c | 13 ++++++-------
drivers/block/mtip32xx/mtip32xx.c | 2 ++
drivers/block/null_blk.c | 2 ++
drivers/block/virtio_blk.c | 2 ++
drivers/scsi/scsi_lib.c | 1 +
include/linux/blk-mq.h | 1 +
6 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 42c94c8..c3333ab 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -380,7 +380,7 @@ void blk_mq_complete_request(struct request *rq)
}
EXPORT_SYMBOL(blk_mq_complete_request);
-static void blk_mq_start_request(struct request *rq)
+void blk_mq_start_request(struct request *rq)
{
struct request_queue *q = rq->q;
@@ -412,16 +412,18 @@ static void blk_mq_start_request(struct request *rq)
rq->nr_phys_segments++;
}
}
+EXPORT_SYMBOL(blk_mq_start_request);
static void __blk_mq_requeue_request(struct request *rq)
{
struct request_queue *q = rq->q;
trace_block_rq_requeue(q, rq);
- clear_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
- if (q->dma_drain_size && blk_rq_bytes(rq))
- rq->nr_phys_segments--;
+ if (test_and_clear_bit(REQ_ATOM_STARTED, &rq->atomic_flags)) {
+ if (q->dma_drain_size && blk_rq_bytes(rq))
+ rq->nr_phys_segments--;
+ }
}
void blk_mq_requeue_request(struct request *rq)
@@ -729,8 +731,6 @@ static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx)
rq = list_first_entry(&rq_list, struct request, queuelist);
list_del_init(&rq->queuelist);
- blk_mq_start_request(rq);
-
ret = q->mq_ops->queue_rq(hctx, rq, list_empty(&rq_list));
switch (ret) {
case BLK_MQ_RQ_QUEUE_OK:
@@ -1177,7 +1177,6 @@ static void blk_mq_make_request(struct request_queue *q, struct bio *bio)
int ret;
blk_mq_bio_to_request(rq, bio);
- blk_mq_start_request(rq);
/*
* For OK queue, we are done. For error, kill it. Any other
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 0e2084f..4042440 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -3783,6 +3783,8 @@ static int mtip_queue_rq(struct blk_mq_hw_ctx *hctx, struct request *rq,
if (unlikely(mtip_check_unal_depth(hctx, rq)))
return BLK_MQ_RQ_QUEUE_BUSY;
+ blk_mq_start_request(rq);
+
ret = mtip_submit_request(hctx, rq);
if (likely(!ret))
return BLK_MQ_RQ_QUEUE_OK;
diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c
index c5b7315..332ce20 100644
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -321,6 +321,8 @@ static int null_queue_rq(struct blk_mq_hw_ctx *hctx, struct request *rq,
cmd->rq = rq;
cmd->nq = hctx->driver_data;
+ blk_mq_start_request(rq);
+
null_handle_cmd(cmd);
return BLK_MQ_RQ_QUEUE_OK;
}
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 13756e0..83816bf 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -205,6 +205,8 @@ static int virtio_queue_rq(struct blk_mq_hw_ctx *hctx, struct request *req,
}
}
+ blk_mq_start_request(req);
+
num = blk_rq_map_sg(hctx->queue, vbr->req, vbr->sg);
if (num) {
if (rq_data_dir(vbr->req) == WRITE)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 1ec00ba..b06a355 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1890,6 +1890,7 @@ static int scsi_queue_rq(struct blk_mq_hw_ctx *hctx, struct request *req,
scsi_init_cmd_errh(cmd);
cmd->scsi_done = scsi_mq_done;
+ blk_mq_start_request(req);
reason = scsi_dispatch_cmd(cmd);
if (reason) {
scsi_set_blocked(cmd, reason);
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index 9c4e306..878b6f7 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -159,6 +159,7 @@ struct request *blk_mq_tag_to_rq(struct blk_mq_tags *tags, unsigned int tag);
struct blk_mq_hw_ctx *blk_mq_map_queue(struct request_queue *, const int ctx_index);
struct blk_mq_hw_ctx *blk_mq_alloc_single_hw_queue(struct blk_mq_tag_set *, unsigned int, int);
+void blk_mq_start_request(struct request *rq);
void blk_mq_end_io(struct request *rq, int error);
void __blk_mq_end_io(struct request *rq, int error);
--
1.9.1
next prev parent reply other threads:[~2014-09-13 23:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-13 23:40 blk-mq timeout handling fixes Christoph Hellwig
2014-09-13 23:40 ` [PATCH 1/6] blk-mq: remove REQ_END Christoph Hellwig
2014-09-13 23:40 ` Christoph Hellwig [this message]
2014-09-15 6:34 ` [PATCH 2/6] blk-mq: call blk_mq_start_request from ->queue_rq Ming Lei
2014-09-15 7:27 ` Ming Lei
2014-09-13 23:40 ` [PATCH 3/6] blk-mq: rename blk_mq_end_io to blk_mq_end_request Christoph Hellwig
2014-09-13 23:40 ` [PATCH 4/6] blk-mq: fix and simplify tag iteration for the timeout handler Christoph Hellwig
2014-09-13 23:40 ` [PATCH 5/6] blk-mq: unshared " Christoph Hellwig
2014-09-13 23:40 ` [PATCH 6/6] blk-mq: pass a reserved argument to the " Christoph Hellwig
2014-09-17 21:53 ` blk-mq timeout handling fixes Elliott, Robert (Server Storage)
2014-09-17 21:56 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410651613-1993-3-git-send-email-hch@lst.de \
--to=hch@lst.de \
--cc=axboe@fb.com \
--cc=elliott@hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®