From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932257AbaIRP2g (ORCPT ); Thu, 18 Sep 2014 11:28:36 -0400 Received: from mailout3.samsung.com ([203.254.224.33]:47312 "EHLO mailout3.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932146AbaIRP2b (ORCPT ); Thu, 18 Sep 2014 11:28:31 -0400 X-AuditID: cbfee61a-f79e46d00000134f-21-541afa1dc2c7 From: Bartlomiej Zolnierkiewicz To: Eduardo Valentin Cc: Zhang Rui , Amit Daniel Kachhap , Naveen Krishna Chatradhi , Lukasz Majewski , Kyungmin Park , linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com Subject: [PATCH 04/33] thermal: exynos: remove needless triminfo_ctrl abstraction Date: Thu, 18 Sep 2014 17:27:21 +0200 Message-id: <1411054070-25757-5-git-send-email-b.zolnierkie@samsung.com> X-Mailer: git-send-email 1.7.10.4 In-reply-to: <1411054070-25757-1-git-send-email-b.zolnierkie@samsung.com> References: <1411054070-25757-1-git-send-email-b.zolnierkie@samsung.com> X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFprHLMWRmVeSWpSXmKPExsVy+t9jAV3ZX1IhBq8/qFo0XA2x2DhjPavF 3eeHGS3mX7nGanG26Q27xZuHmxktLu+aw2bxufcIo8WM8/uYLJ487GNz4PLYOesuu8fiPS+Z PPq2rGL0+LxJLoAlissmJTUnsyy1SN8ugSvj/7uj7AX3DSv6e34zNjB2anUxcnJICJhINNyf ygZhi0lcuLceyObiEBJYxCix+8NpVgini0ni5qIzjCBVbAJWEhPbV4HZIgJaEicubWcCKWIW uMUk8frGZLCEsECwxPRFE5lBbBYBVYlJqy6ygNi8Ah4SDz+sZoZYpyjR/WwC2GpOAU+Jhlub 2EFsIaCati13mScw8i5gZFjFKJpakFxQnJSea6hXnJhbXJqXrpecn7uJERxqz6R2MK5ssDjE KMDBqMTDe4BXKkSINbGsuDL3EKMEB7OSCO+fj0Ah3pTEyqrUovz4otKc1OJDjNIcLErivAda rQOFBNITS1KzU1MLUotgskwcnFINjIKWL7V+POrR3t8oZij8I0RF+3Ro/YNrShutYtt/vZq1 OXbKw0Vmi5bO2fMmxtp7r2tugt0CTj6NlHbVJj+3jnW73O8es9hiGBUvmhMd7lfaG8szcYvw J7kVb12O/c9W2n5/ZkG97wyB5cvNz5odT5mbqtFRw8Vs0Lgv+ktT4908nsf+W99yKrEUZyQa ajEXFScCAIawcUwxAgAA Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org reg->triminfo_ctrl[] is used in only exynos_tmu_initialize() and accessed only if TMU_SUPPORT_TRIM_RELOAD flag is set. This flag is set only on Exynos3250, Exynos4412 and Exynos5250 (other SoC types don't even have triminfo_ctrl[] entries assigned in their struct exynos_tmu_registers instances) so the register abstraction is not needed and can be removed. There should be no functional changes caused by this patch. Cc: Naveen Krishna Chatradhi Cc: Amit Daniel Kachhap Cc: Lukasz Majewski Cc: Eduardo Valentin Cc: Zhang Rui Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park --- drivers/thermal/samsung/exynos_thermal_common.h | 1 - drivers/thermal/samsung/exynos_tmu.c | 15 +++++++-------- drivers/thermal/samsung/exynos_tmu.h | 7 ------- drivers/thermal/samsung/exynos_tmu_data.c | 8 -------- 4 files changed, 7 insertions(+), 24 deletions(-) diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 158f5aa..cd44719 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -27,7 +27,6 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 -#define MAX_TRIMINFO_CTRL_REG 2 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 8a45b4b..52bcc23 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -145,15 +145,14 @@ static int exynos_tmu_initialize(struct platform_device *pdev) } if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) { - for (i = 0; i < reg->triminfo_ctrl_count; i++) { - if (pdata->triminfo_reload[i]) { - ctrl = readl(data->base + - reg->triminfo_ctrl[i]); - ctrl |= pdata->triminfo_reload[i]; - writel(ctrl, data->base + - reg->triminfo_ctrl[i]); - } + if (data->soc == SOC_ARCH_EXYNOS3250) { + ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1); + ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; + writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1); } + ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2); + ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; + writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2); } /* Save trimming info in order to perform calibration */ diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 531c01c..d12e242 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -76,8 +76,6 @@ enum soc_type { * struct exynos_tmu_register - register descriptors to access registers and * bitfields. The register validity, offsets and bitfield values may vary * slightly across different exynos SOC's. - * @triminfo_ctrl: trim info controller register. - * @triminfo_ctrl_count: the number of trim info controller register. * @tmu_ctrl: TMU main controller register. * @test_mux_addr_shift: shift bits of test mux address. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. @@ -108,9 +106,6 @@ enum soc_type { * @tmu_pmin: register to get/set the Pmin value. */ struct exynos_tmu_registers { - u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG]; - u32 triminfo_ctrl_count; - u32 tmu_ctrl; u32 test_mux_addr_shift; u32 therm_trip_mode_shift; @@ -192,7 +187,6 @@ struct exynos_tmu_registers { * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming * @test_mux; information if SoC supports test MUX - * @triminfo_reload: reload value to read TRIMINFO register * @cal_type: calibration type for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may @@ -223,7 +217,6 @@ struct exynos_tmu_platform_data { u8 second_point_trim; u8 default_temp_offset; u8 test_mux; - u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG]; enum calibration_type cal_type; enum soc_type type; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index 89c072a..04f1d71 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -83,9 +83,6 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS3250) static const struct exynos_tmu_registers exynos3250_tmu_registers = { - .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1, - .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2, - .triminfo_ctrl_count = 2, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, @@ -145,8 +142,6 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ - .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ - .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos3250_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ @@ -168,8 +163,6 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static const struct exynos_tmu_registers exynos4412_tmu_registers = { - .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2, - .triminfo_ctrl_count = 1, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, @@ -230,7 +223,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ - .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos4412_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ -- 1.8.2.3