From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754193AbaIXNxm (ORCPT ); Wed, 24 Sep 2014 09:53:42 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:38822 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753643AbaIXNrs (ORCPT ); Wed, 24 Sep 2014 09:47:48 -0400 From: Kishon Vijay Abraham I To: CC: , Subject: [PATCH 16/22] phy: phy-stih407-usb: Add dt documentation for USB picophy found on stih407 SoC family Date: Wed, 24 Sep 2014 19:17:14 +0530 Message-ID: <1411566440-19169-17-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1411566440-19169-1-git-send-email-kishon@ti.com> References: <1411566440-19169-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Peter Griffin This patch adds the dt documentation for the usb picophy found on stih407 SoC family available from STMicroelectronics. Signed-off-by: Giuseppe Cavallaro Signed-off-by: Peter Griffin Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/phy-stih407-usb.txt | 30 ++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-stih407-usb.txt diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt new file mode 100644 index 0000000..1ef8228 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt @@ -0,0 +1,30 @@ +ST STiH407 USB PHY controller + +This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3 +host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics. + +Required properties: +- compatible : should be "st,stih407-usb2-phy" +- reg : contain the offset and length of the system configuration registers + used as glue logic to control & parameter phy +- reg-names : the names of the system configuration registers in "reg", should be "param" and "reg" +- st,syscfg : sysconfig register to manage phy parameter at driver level +- resets : list of phandle and reset specifier pairs. There should be two entries, one + for the whole phy and one for the port +- reset-names : list of reset signal names. Should be "global" and "port" +See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/reset.txt + +Example: + +usb2_picophy0: usbpicophy@f8 { + compatible = "st,stih407-usb2-phy"; + reg = <0xf8 0x04>, /* syscfg 5062 */ + <0xf4 0x04>; /* syscfg 5061 */ + reg-names = "param", "ctrl"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; +}; -- 1.7.9.5