From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753753AbaIXNrz (ORCPT ); Wed, 24 Sep 2014 09:47:55 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:55832 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753683AbaIXNrx (ORCPT ); Wed, 24 Sep 2014 09:47:53 -0400 From: Kishon Vijay Abraham I To: CC: , Subject: [PATCH 19/22] phy: phy-stih41x-usb: Add dt documentation for USB phy on STiH415/6 Date: Wed, 24 Sep 2014 19:17:17 +0530 Message-ID: <1411566440-19169-20-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1411566440-19169-1-git-send-email-kishon@ti.com> References: <1411566440-19169-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Peter Griffin This patch adds dt documentation bindings for the usb phy found on STiH415/5 SoC's from STMicroelectronics, which support USB 1.1 and 2.0. Signed-off-by: Maxime Coquelin Signed-off-by: Peter Griffin Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/phy-stih41x-usb.txt | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt diff --git a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt new file mode 100644 index 0000000..00944a0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt @@ -0,0 +1,24 @@ +STMicroelectronics STiH41x USB PHY binding +------------------------------------------ + +This file contains documentation for the usb phy found in STiH415/6 SoCs from +STMicroelectronics. + +Required properties: +- compatible : should be "st,stih416-usb-phy" or "st,stih415-usb-phy" +- st,syscfg : should be a phandle of the syscfg node +- clock-names : must contain "osc_phy" +- clocks : must contain an entry for each name in clock-names. +See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- #phy-cells : must be 0 for this phy +See: Documentation/devicetree/bindings/phy/phy-bindings.txt + +Example: + +usb2_phy: usb2phy@0 { + compatible = "st,stih416-usb-phy"; + #phy-cell = <0>; + st,syscfg = <&syscfg_rear>; + clocks = <&clk_sysin>; + clock-names = "osc_phy"; +}; -- 1.7.9.5