From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753435AbaI1C3M (ORCPT ); Sat, 27 Sep 2014 22:29:12 -0400 Received: from mail-pa0-f49.google.com ([209.85.220.49]:36986 "EHLO mail-pa0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751945AbaI1C3K (ORCPT ); Sat, 27 Sep 2014 22:29:10 -0400 From: Chris Zhong To: dianders@chromium.org, heiko@sntech.de Cc: linux-rockchip@lists.infradead.org, lee.jones@linaro.org, broonie@kernel.org, Chris Zhong , devicetree@vger.kernel.org, Liam Girdwood , Kumar Gala , linux-kernel@vger.kernel.org, Grant Likely , Ian Campbell , Rob Herring , Pawel Moll , Mark Rutland Subject: [PATCH v7 0/2] regulator: get voltage & duty table from dts for pwm-regulator Date: Sun, 28 Sep 2014 10:28:52 +0800 Message-Id: <1411871334-17692-1-git-send-email-zyw@rock-chips.com> X-Mailer: git-send-email 1.7.9.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org get voltage & duty table from device tree might be better, other platforms can also use this driver without any modify. Tested on a rk3288 sdk board as logic voltage regulator. Changes in v7: Adviced by Mark Brown - re-edit changelog - re-edit changelog Changes in v6: Adviced by Mark Rutland - fix a spelling error Changes in v4: Adviced by Doug Anderson - improve kconfig - add const for desc structure Adviced by Doug Anderson - remove regulator-always-on and regulator-boot-on from the Example Changes in v3: Adviced by Doug Anderson - Make Kconfig & Makefile alphabetical - remove pwm_reg_period from pwm_regulator_data - modify the calculation in pwm_regulator_set_voltage_sel - add length validity check Adviced by Doug Anderson - update the Example Changes in v2: Adviced by Lee Jones - rename the file - remove all the prefix st_ - add depend on PWM in Kconfig Adviced by Lee Jones - rename the documentation Adviced by Doug Anderson - update the example Adviced by Mark Rutland - remove pwm-reg-period Chris Zhong (2): regulator: pwm-regulator: get voltage and duty table from dts dt-bindings: add devicetree bindings for pwm regulator .../bindings/regulator/pwm-regulator.txt | 27 ++++ drivers/regulator/Kconfig | 13 +- drivers/regulator/Makefile | 2 +- drivers/regulator/{st-pwm.c => pwm-regulator.c} | 147 ++++++++++---------- 4 files changed, 112 insertions(+), 77 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/pwm-regulator.txt rename drivers/regulator/{st-pwm.c => pwm-regulator.c} (44%) -- 1.7.9.5