From: Liviu Dudau <Liviu.Dudau@arm.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Arnd Bergmann <arnd@arndb.de>, Rob Herring <robh+dt@kernel.org>,
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <Will.Deacon@arm.com>,
Russell King <linux@arm.linux.org.uk>,
linux-pci <linux-pci@vger.kernel.org>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Tanmay Inamdar <tinamdar@apm.com>,
Grant Likely <grant.likely@secretlab.ca>,
Sinan Kaya <okaya@codeaurora.org>,
Jingoo Han <jg1.han@samsung.com>,
Kukjin Kim <kgene.kim@samsung.com>,
Suravee Suthikulanit <suravee.suthikulpanit@amd.com>,
linux-arch <linux-arch@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Device Tree ML <devicetree@vger.kernel.org>,
LAKML <linux-arm-kernel@lists.infradead.org>,
Yinghai Lu <yinghai@kernel.org>,
Jiang Liu <jiang.liu@linux.intel.com>,
Grant Likely <grant.likely@linaro.org>,
Thierry Reding <thierry.reding@gmail.com>,
Simon Horman <horms@verge.net.au>
Subject: [PATCH v13 06/12] of/pci: Fix the conversion of IO ranges into IO resources
Date: Mon, 29 Sep 2014 15:29:25 +0100 [thread overview]
Message-ID: <1412000971-9242-7-git-send-email-Liviu.Dudau@arm.com> (raw)
In-Reply-To: <1412000971-9242-1-git-send-email-Liviu.Dudau@arm.com>
The ranges property for a host bridge controller in DT describes the
mapping between the PCI bus address and the CPU physical address. The
resources framework however expects that the IO resources start at a pseudo
"port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The
conversion from PCI ranges to resources failed to take that into account,
returning a CPU physical address instead of a port number.
Also fix all the drivers that depend on the old behaviour by fetching the
CPU physical address based on the port number where it is being needed.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Simon Horman <horms@verge.net.au>
CC: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm/mach-integrator/pci_v3.c | 23 ++++++++++----------
drivers/of/address.c | 44 +++++++++++++++++++++++++++++++++++----
drivers/pci/host/pci-tegra.c | 10 ++++++---
drivers/pci/host/pcie-rcar.c | 21 +++++++++++++------
include/linux/of_address.h | 6 +++---
5 files changed, 77 insertions(+), 27 deletions(-)
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 05e1f73..c186a17 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void)
{
unsigned long flags;
unsigned int temp;
+ phys_addr_t io_address = pci_pio_to_address(io_mem.start);
pcibios_min_mem = 0x00100000;
@@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void)
/*
* Setup window 2 - PCI IO
*/
- v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) |
+ v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) |
V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
@@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void)
static void __init pci_v3_postinit(void)
{
unsigned int pci_cmd;
+ phys_addr_t io_address = pci_pio_to_address(io_mem.start);
pci_cmd = PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
@@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void)
"interrupt: %d\n", ret);
#endif
- register_isa_ports(non_mem.start, io_mem.start, 0);
+ register_isa_ports(non_mem.start, io_address, 0);
}
/*
@@ -867,33 +869,32 @@ static int __init pci_v3_probe(struct platform_device *pdev)
for_each_of_pci_range(&parser, &range) {
if (!range.flags) {
- of_pci_range_to_resource(&range, np, &conf_mem);
+ ret = of_pci_range_to_resource(&range, np, &conf_mem);
conf_mem.name = "PCIv3 config";
}
if (range.flags & IORESOURCE_IO) {
- of_pci_range_to_resource(&range, np, &io_mem);
+ ret = of_pci_range_to_resource(&range, np, &io_mem);
io_mem.name = "PCIv3 I/O";
}
if ((range.flags & IORESOURCE_MEM) &&
!(range.flags & IORESOURCE_PREFETCH)) {
non_mem_pci = range.pci_addr;
non_mem_pci_sz = range.size;
- of_pci_range_to_resource(&range, np, &non_mem);
+ ret = of_pci_range_to_resource(&range, np, &non_mem);
non_mem.name = "PCIv3 non-prefetched mem";
}
if ((range.flags & IORESOURCE_MEM) &&
(range.flags & IORESOURCE_PREFETCH)) {
pre_mem_pci = range.pci_addr;
pre_mem_pci_sz = range.size;
- of_pci_range_to_resource(&range, np, &pre_mem);
+ ret = of_pci_range_to_resource(&range, np, &pre_mem);
pre_mem.name = "PCIv3 prefetched mem";
}
- }
- if (!conf_mem.start || !io_mem.start ||
- !non_mem.start || !pre_mem.start) {
- dev_err(&pdev->dev, "missing ranges in device node\n");
- return -EINVAL;
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing ranges in device node\n");
+ return ret;
+ }
}
pci_v3.map_irq = of_irq_parse_and_map_pci;
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 327a574..afdb782 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -295,14 +295,50 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
}
EXPORT_SYMBOL_GPL(of_pci_range_parser_one);
-void of_pci_range_to_resource(struct of_pci_range *range,
- struct device_node *np, struct resource *res)
+/*
+ * of_pci_range_to_resource - Create a resource from an of_pci_range
+ * @range: the PCI range that describes the resource
+ * @np: device node where the range belongs to
+ * @res: pointer to a valid resource that will be updated to
+ * reflect the values contained in the range.
+ *
+ * Returns EINVAL if the range cannot be converted to resource.
+ *
+ * Note that if the range is an IO range, the resource will be converted
+ * using pci_address_to_pio() which can fail if it is called too early or
+ * if the range cannot be matched to any host bridge IO space (our case here).
+ * To guard against that we try to register the IO range first.
+ * If that fails we know that pci_address_to_pio() will do too.
+ */
+int of_pci_range_to_resource(struct of_pci_range *range,
+ struct device_node *np, struct resource *res)
{
+ int err;
res->flags = range->flags;
- res->start = range->cpu_addr;
- res->end = range->cpu_addr + range->size - 1;
res->parent = res->child = res->sibling = NULL;
res->name = np->full_name;
+
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long port;
+ err = pci_register_io_range(range->cpu_addr, range->size);
+ if (err)
+ goto invalid_range;
+ port = pci_address_to_pio(range->cpu_addr);
+ if (port == (unsigned long)-1) {
+ err = -EINVAL;
+ goto invalid_range;
+ }
+ res->start = port;
+ } else {
+ res->start = range->cpu_addr;
+ }
+ res->end = res->start + range->size - 1;
+ return 0;
+
+invalid_range:
+ res->start = (resource_size_t)OF_BAD_ADDR;
+ res->end = (resource_size_t)OF_BAD_ADDR;
+ return err;
}
#endif /* CONFIG_PCI */
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..946935d 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -626,13 +626,14 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct tegra_pcie *pcie = sys_to_pcie(sys);
+ phys_addr_t io_start = pci_pio_to_address(pcie->io.start);
pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->prefetch,
sys->mem_offset);
pci_add_resource(&sys->resources, &pcie->busn);
- pci_ioremap_io(nr * SZ_64K, pcie->io.start);
+ pci_ioremap_io(nr * SZ_64K, io_start);
return 1;
}
@@ -737,6 +738,7 @@ static irqreturn_t tegra_pcie_isr(int irq, void *arg)
static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
{
u32 fpci_bar, size, axi_address;
+ phys_addr_t io_start = pci_pio_to_address(pcie->io.start);
/* Bar 0: type 1 extended configuration space */
fpci_bar = 0xfe100000;
@@ -749,7 +751,7 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
/* Bar 1: downstream IO bar */
fpci_bar = 0xfdfc0000;
size = resource_size(&pcie->io);
- axi_address = pcie->io.start;
+ axi_address = io_start;
afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
@@ -1520,7 +1522,9 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
}
for_each_of_pci_range(&parser, &range) {
- of_pci_range_to_resource(&range, np, &res);
+ err = of_pci_range_to_resource(&range, np, &res);
+ if (err < 0)
+ return err;
switch (res.flags & IORESOURCE_TYPE_BITS) {
case IORESOURCE_IO:
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..61158e0 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -323,6 +323,7 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie)
/* Setup PCIe address space mappings for each resource */
resource_size_t size;
+ resource_size_t res_start;
u32 mask;
rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win));
@@ -335,8 +336,13 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie)
mask = (roundup_pow_of_two(size) / SZ_128) - 1;
rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win));
- rcar_pci_write_reg(pcie, upper_32_bits(res->start), PCIEPARH(win));
- rcar_pci_write_reg(pcie, lower_32_bits(res->start), PCIEPARL(win));
+ if (res->flags & IORESOURCE_IO)
+ res_start = pci_pio_to_address(res->start);
+ else
+ res_start = res->start;
+
+ rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPARH(win));
+ rcar_pci_write_reg(pcie, lower_32_bits(res_start), PCIEPARL(win));
/* First resource is for IO */
mask = PAR_ENABLE;
@@ -363,9 +369,10 @@ static int rcar_pcie_setup(int nr, struct pci_sys_data *sys)
rcar_pcie_setup_window(i, pcie);
- if (res->flags & IORESOURCE_IO)
- pci_ioremap_io(nr * SZ_64K, res->start);
- else
+ if (res->flags & IORESOURCE_IO) {
+ phys_addr_t io_start = pci_pio_to_address(res->start);
+ pci_ioremap_io(nr * SZ_64K, io_start);
+ } else
pci_add_resource(&sys->resources, res);
}
pci_add_resource(&sys->resources, &pcie->busn);
@@ -935,8 +942,10 @@ static int rcar_pcie_probe(struct platform_device *pdev)
}
for_each_of_pci_range(&parser, &range) {
- of_pci_range_to_resource(&range, pdev->dev.of_node,
+ err = of_pci_range_to_resource(&range, pdev->dev.of_node,
&pcie->res[win++]);
+ if (err < 0)
+ return err;
if (win > RCAR_PCI_MAX_RESOURCES)
break;
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index fa20aa1..7ebb877 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -129,9 +129,9 @@ extern const __be32 *of_get_pci_address(struct device_node *dev, int bar_no,
u64 *size, unsigned int *flags);
extern int of_pci_address_to_resource(struct device_node *dev, int bar,
struct resource *r);
-extern void of_pci_range_to_resource(struct of_pci_range *range,
- struct device_node *np,
- struct resource *res);
+extern int of_pci_range_to_resource(struct of_pci_range *range,
+ struct device_node *np,
+ struct resource *res);
#else /* CONFIG_OF_ADDRESS && CONFIG_PCI */
static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
struct resource *r)
--
2.1.1
next prev parent reply other threads:[~2014-09-29 14:31 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-29 14:29 [PATCH v13 00/12] Support for creating generic PCI host bridges from DT Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 01/12] asm-generic/io.h: Fix ioport_map() for !CONFIG_GENERIC_IOMAP Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 02/12] of/pci: Add pci_register_io_range() and pci_pio_to_address() Liviu Dudau
2014-09-29 19:20 ` Al Stone
2014-09-30 8:59 ` Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 03/12] ARM: Define PCI_IOBASE as the base of virtual PCI IO space Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 04/12] of/pci: Define of_pci_range_to_resource() only when CONFIG_PCI=y Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 05/12] of/pci: Move of_pci_range_to_resources() to of/address.c Liviu Dudau
2014-09-29 14:29 ` Liviu Dudau [this message]
2014-09-29 14:29 ` [PATCH v13 07/12] PCI: Add generic domain handling Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 08/12] of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 09/12] of/pci: Add support for parsing PCI host bridge resources from DT Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 10/12] PCI: Assign unassigned bus resources in pci_scan_root_bus() Liviu Dudau
2014-09-29 18:25 ` Yinghai Lu
2014-09-29 19:06 ` Yinghai Lu
2014-09-29 21:02 ` Benjamin Herrenschmidt
2014-09-29 21:33 ` Bjorn Helgaas
2014-09-29 22:31 ` Benjamin Herrenschmidt
2014-09-29 23:08 ` Bjorn Helgaas
2014-09-30 8:54 ` Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 11/12] PCI: Add pci_remap_iospace() to map bus I/O resources Liviu Dudau
2014-09-29 14:29 ` [PATCH v13 12/12] arm64: Add architectural support for PCI Liviu Dudau
2014-09-29 19:43 ` [PATCH v13 00/12] Support for creating generic PCI host bridges from DT Bjorn Helgaas
2014-09-30 10:39 ` Liviu Dudau
2014-09-30 16:18 ` Bjorn Helgaas
2014-09-30 16:45 ` Liviu Dudau
2014-09-30 16:54 ` Liviu Dudau
2014-10-08 7:44 ` Robert Richter
2014-10-08 9:13 ` Liviu Dudau
2014-10-08 10:36 ` Robert Richter
2014-10-08 11:46 ` Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412000971-9242-7-git-send-email-Liviu.Dudau@arm.com \
--to=liviu.dudau@arm.com \
--cc=Will.Deacon@arm.com \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=grant.likely@secretlab.ca \
--cc=horms@verge.net.au \
--cc=jg1.han@samsung.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=jiang.liu@linux.intel.com \
--cc=kgene.kim@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=okaya@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=suravee.suthikulpanit@amd.com \
--cc=thierry.reding@gmail.com \
--cc=tinamdar@apm.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®