From: "Li, Zhen-Hua" <zhen-hual@hp.com>
To: <linux-kernel@vger.kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>, <linux-pci@vger.kernel.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Bruce Allan <bruce.w.allan@intel.com>,
Carolyn Wyborny <carolyn.wyborny@intel.com>,
Don Skidmore <donald.c.skidmore@intel.com>,
Greg Rose <gregory.v.rose@intel.com>,
Alex Duyck <alexander.h.duyck@intel.com>,
John Ronciak <john.ronciak@intel.com>,
Mitch Williams <mitch.a.williams@intel.com>,
Linux NICS <linux.nics@intel.com>,
<e1000-devel@lists.sourceforge.net>, <linda.knippers@hp.com>,
"Li, Zhen-Hua" <zhen-hual@hp.com>
Subject: [PATCH 1/1] pci/quirks: fix a dmar fault for intel 82599 card
Date: Tue, 30 Sep 2014 14:09:54 +0800 [thread overview]
Message-ID: <1412057394-7186-1-git-send-email-zhen-hual@hp.com> (raw)
On a HP system with Intel Corporation 82599 ethernet adapter, when kernel
crashed and the kdump kernel boots with intel_iommu=on, there may be some
unexpected DMA requests on this adapter, which will cause DMA Remapping
faults like:
dmar: DRHD: handling fault status reg 102
dmar: DMAR:[DMA Read] Request device [41:00.0] fault addr fff81000
DMAR:[fault reason 01] Present bit in root entry is clear
Analysis for this bug:
The present bit is set in this function:
static struct context_entry * device_to_context_entry(
struct intel_iommu *iommu, u8 bus, u8 devfn)
{
......
set_root_present(root);
......
}
Calling tree:
ixgbe_open
ixgbe_setup_tx_resources
intel_alloc_coherent
__intel_map_single
domain_context_mapping
domain_context_mapping_one
device_to_context_entry
This means, the present bit in root entry will not be set until the device
driver is loaded.
But in the kdump kernel, some hardware device does not know the OS is the
second kernel and the drivers should be loaded again, this causes there are
some unexpected DMA requsts on this device when it has not been initialized,
and then the DMA Remapping errors come.
To fix this DMAR fault, we need to reset the bus that this device on. Reset
the device itself does not work.
There also was a discussion:
https://lkml.org/lkml/2013/5/14/9
Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com>
---
drivers/pci/quirks.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 80c2d01..5198af3 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -25,6 +25,7 @@
#include <linux/sched.h>
#include <linux/ktime.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
+#include <linux/crash_dump.h>
#include "pci.h"
/*
@@ -3832,3 +3833,13 @@ void pci_dev_specific_enable_acs(struct pci_dev *dev)
}
}
}
+
+#ifdef CONFIG_CRASH_DUMP
+void quirk_reset_buggy_devices(struct pci_dev *dev)
+{
+ if (unlikely(is_kdump_kernel()))
+ pci_try_reset_bus(dev->bus);
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_INTEL, 0x10f8,
+ PCI_CLASS_NETWORK_ETHERNET, 8, quirk_reset_buggy_devices);
+#endif
--
2.0.0-rc0
next reply other threads:[~2014-09-30 6:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-30 6:09 Li, Zhen-Hua [this message]
2014-09-30 6:15 ` Li, ZhenHua
2014-10-02 15:09 ` Bjorn Helgaas
2014-10-03 14:28 ` Alexander Duyck
2014-10-08 1:46 ` Li, ZhenHua
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412057394-7186-1-git-send-email-zhen-hual@hp.com \
--to=zhen-hual@hp.com \
--cc=alexander.h.duyck@intel.com \
--cc=bhelgaas@google.com \
--cc=bruce.w.allan@intel.com \
--cc=carolyn.wyborny@intel.com \
--cc=donald.c.skidmore@intel.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=gregory.v.rose@intel.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=john.ronciak@intel.com \
--cc=linda.knippers@hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux.nics@intel.com \
--cc=mitch.a.williams@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®