[PATCH v2 1/2] mtd: nand: omap: Do not use global variables

[Rostislav Lisovy <lisovy@gmail.com>]

Since the commit 97a288ba2cfa ("ARM: omap2+: gpmc-nand: Use
dynamic platform_device_alloc()") gpmc-nand driver supports
multiple NAND flash devices connected to the single controller.
Remove global variable to make the code thread-safe.

Signed-off-by: Rostislav Lisovy <lisovy@merica.cz>
---
Changes since v1:
* Do not dynamically allocate the 'struct nand_ecclayout' but rather
  include it in the 'struct omap_nand_info' (Roger Quadros)


 drivers/mtd/nand/omap2.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 3b357e9..f0dcdb6 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -144,9 +144,6 @@ static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
 	0xac, 0x6b, 0xff, 0x99, 0x7b};
 static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
 
-/* oob info generated runtime depending on ecc algorithm and layout selected */
-static struct nand_ecclayout omap_oobinfo;
-
 struct omap_nand_info {
 	struct nand_hw_control		controller;
 	struct omap_nand_platform_data	*pdata;
@@ -168,6 +165,8 @@ struct omap_nand_info {
 	u_char				*buf;
 	int					buf_len;
 	struct gpmc_nand_regs		reg;
+	/* generated on runtime depending on ecc algorithm and layout selected */
+	struct nand_ecclayout		oobinfo;
 	/* fields specific for BCHx_HW ECC scheme */
 	struct device			*elm_dev;
 	struct device_node		*of_node;
@@ -1840,7 +1839,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 	}
 
 	/* populate MTD interface based on ECC scheme */
-	ecclayout		= &omap_oobinfo;
+	ecclayout		= &info->oobinfo;
 	switch (info->ecc_opt) {
 	case OMAP_ECC_HAM1_CODE_SW:
 		nand_chip->ecc.mode = NAND_ECC_SOFT;
-- 
1.9.1