From: <atull@opensource.altera.com>
To: <linux@roeck-us.net>, <jdelvare@suse.de>
Cc: <lm-sensors@lm-sensors.org>, <lgirdwood@gmail.com>,
<broonie@kernel.org>, <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <delicious.quinoa@gmail.com>,
<dinguyen@opensource.altera.com>,
<yvanderv@opensource.altera.com>,
Alan Tull <atull@opensource.altera.com>
Subject: [PATCH v5 0/4] This set of patches adds regulator support for pmbus_core.c and ltc2978.c
Date: Thu, 2 Oct 2014 13:37:47 -0500 [thread overview]
Message-ID: <1412275071-6417-1-git-send-email-atull@opensource.altera.com> (raw)
From: Alan Tull <atull@opensource.altera.com>
Each output has individual on/off control.
>From PMBus_Specification_Part_II_Rev_1-3_20140318.pdf:
12.1.1. OPERATION Command Bit [7]
Bit [7] controls whether the PMBus device output is on or off.
If bit [7] is cleared (equals 0), then the output is off.
If bit [7] is set (equals 1), then the output is on.
This patchset now uses "regulator: of: Provide simplified DT parsing method"
I don't see this patch in Linus's tree or for-next yet, so I applied it to my branch.
New in v5:
clean whitespace in the DT bindings document
add prototypes for the two new functions in pmbus_core.c
use "regulator: of: Provide simplified DT parsing method"
- remove #include <linux/regulator/of_regulator.h>
- remove of_regulator_match in pmbus_driver_info
- add of_match and regulators_node for regulator_desc macro
- remove pmbus_regulator_parse_dt
- remove unneeded 'else' that set init_data and of_node
Patch 1: document device tree bindings for ltc2978
Patch 2: add two helper functions for byte pmbus byte operations
* byte write and byte read/modify/write
Patch 3: regulator support added in pmbus_core.c and pmbus.h
* regulator_ops functions (is_enabled, enable, and disable)
* gets regulator init data from device tree or platform data
* registers the regulators
* header has a macro for chip drivers to build their
regulator_desc data
Patch 4: changes for ltc2978.c
* Add Kconfig to enable/disable ltc2978 regulator functionality.
* Update list of parts supported in Kconfig.
* add regulator_desc info.
* use same structs for all parts; set num_regulators appropriately.
Alan Tull (4):
hwmon: ltc2978: device tree bindings documentation
pmbus: core: add helpers for byte write and read modify write
pmbus: add regulator support
pmbus: ltc2978: add regulator support
.../devicetree/bindings/hwmon/ltc2978.txt | 41 +++++++
drivers/hwmon/pmbus/Kconfig | 11 +-
drivers/hwmon/pmbus/ltc2978.c | 24 ++++
drivers/hwmon/pmbus/pmbus.h | 30 +++++
drivers/hwmon/pmbus/pmbus_core.c | 118 ++++++++++++++++++++
include/linux/i2c/pmbus.h | 4 +
6 files changed, 226 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt
--
1.7.9.5
next reply other threads:[~2014-10-02 18:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 18:37 atull [this message]
2014-10-02 18:37 ` [PATCH v5 1/4] hwmon: ltc2978: device tree bindings documentation atull
2014-10-03 12:27 ` Mark Rutland
2014-10-03 13:03 ` Guenter Roeck
2014-10-03 13:05 ` Mark Rutland
2014-10-03 15:21 ` Guenter Roeck
2014-10-03 17:28 ` Guenter Roeck
2014-10-03 23:13 ` Mark Brown
2014-10-03 23:23 ` Guenter Roeck
2014-10-04 9:53 ` Mark Brown
2014-10-05 0:13 ` Guenter Roeck
2014-10-06 17:28 ` Guenter Roeck
2014-10-08 16:12 ` atull
2014-10-08 20:12 ` Guenter Roeck
2014-10-08 20:21 ` Mark Brown
2014-10-02 18:37 ` [PATCH v5 2/4] pmbus: core: add helpers for byte write and read modify write atull
2014-10-02 18:37 ` [PATCH v5 3/4] pmbus: add regulator support atull
2014-10-03 14:27 ` Mark Brown
2014-10-03 15:23 ` Guenter Roeck
2014-10-03 16:42 ` Mark Brown
2014-10-07 14:38 ` atull
2014-10-02 18:37 ` [PATCH v5 4/4] pmbus: ltc2978: " atull
2014-10-03 3:12 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412275071-6417-1-git-send-email-atull@opensource.altera.com \
--to=atull@opensource.altera.com \
--cc=broonie@kernel.org \
--cc=delicious.quinoa@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@opensource.altera.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jdelvare@suse.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=yvanderv@opensource.altera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome