From: minyard@acm.org
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
OpenIPMI Developers <openipmi-developer@lists.sourceforge.net>,
Takao Indoh <indou.takao@jp.fujitsu.com>,
Corey Minyard <cminyard@mvista.com>
Subject: [PATCH 4/4] ipmi: Clear drvdata when interface is removed
Date: Mon, 6 Oct 2014 14:17:53 -0500 [thread overview]
Message-ID: <1412623073-6166-5-git-send-email-minyard@acm.org> (raw)
In-Reply-To: <1412623073-6166-1-git-send-email-minyard@acm.org>
From: Takao Indoh <indou.takao@jp.fujitsu.com>
This patch fixes a bug on hotmod removing.
After ipmi interface is removed using hotmod, kernel panic occurs when
rmmod impi_si. For example, try this:
# echo "remove,"`cat /proc/ipmi/0/params` > \
/sys/module/ipmi_si/parameters/hotmod
# rmmod ipmi_si
Then, rmmod fails with the following messages.
------------[ cut here ]------------
WARNING: CPU: 12 PID: 10819 at /mnt/repos/linux/lib/list_debug.c:53
__list_del_entry+0x63/0xd0()
(snip)
CPU: 12 PID: 10819 Comm: rmmod Not tainted 3.17.0-rc1 #19
Hardware name: FUJITSU-SV PRIMERGY BX920 S2/D3030, BIOS 080015
Rev.3D81.3030 02/10/2012
0000000000000009 ffff88022d547d40 ffffffff81575778 ffff88022d547d88
ffff88022d547d78 ffffffff8104ec5d ffff88023908cdb0 ffffffffa06fa4e0
ffff8800bac20860 0000000000000000 0000000002046090 ffff88022d547dd8
Call Trace:
[<ffffffff81575778>] dump_stack+0x45/0x56
[<ffffffff8104ec5d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff8104eccc>] warn_slowpath_fmt+0x4c/0x50
[<ffffffff811f60bf>] ? __kernfs_remove+0xdf/0x220
[<ffffffff81291213>] __list_del_entry+0x63/0xd0
[<ffffffff8129128d>] list_del+0xd/0x30
[<ffffffffa06f285a>] cleanup_one_si+0x2a/0x230 [ipmi_si]
[<ffffffffa06f2f05>] ipmi_pnp_remove+0x15/0x20 [ipmi_si]
[<ffffffff8131c7d4>] pnp_device_remove+0x24/0x40
[<ffffffff8137175f>] __device_release_driver+0x7f/0xf0
[<ffffffff81372100>] driver_detach+0xb0/0xc0
[<ffffffff81371415>] bus_remove_driver+0x55/0xd0
[<ffffffff8137283c>] driver_unregister+0x2c/0x50
[<ffffffff8131ca02>] pnp_unregister_driver+0x12/0x20
[<ffffffffa06f347c>] cleanup_ipmi_si+0xbc/0xf0 [ipmi_si]
[<ffffffff810c33f2>] SyS_delete_module+0x132/0x1c0
[<ffffffff81002ab9>] ? do_notify_resume+0x59/0x80
[<ffffffff8157c45a>] ? int_signal+0x12/0x17
[<ffffffff8157c1d2>] system_call_fastpath+0x16/0x1b
---[ end trace 70b4377268f85c23 ]---
list_del in cleanup_one_si() fails because the smi_info is already
removed when hotmod removing.
When ipmi interface is removed by hotmod, smi_info is removed by
cleanup_one_si(), but is is still set in drvdata. Therefore when rmmod
ipmi_si, ipmi_pnp_remove tries to remove it again and fails.
By this patch, a pointer to smi_info in drvdata is cleared when hotmod
removing so that it will be not accessed when rmmod.
changelog:
v2:
- Clear drvdata in cleanup_one_si
- Change subject
v1:
https://lkml.org/lkml/2014/9/8/741
Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
drivers/char/ipmi/ipmi_si_intf.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 1c43f9a..5c4e1f6 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -3658,6 +3658,9 @@ static void cleanup_one_si(struct smi_info *to_clean)
if (!to_clean)
return;
+ if (to_clean->dev)
+ dev_set_drvdata(to_clean->dev, NULL);
+
list_del(&to_clean->link);
/* Tell the driver that we are shutting down. */
--
1.8.3.1
prev parent reply other threads:[~2014-10-06 19:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-06 19:17 [PATCH 0/4] ipmi: various collected bug fixes minyard
2014-10-06 19:17 ` [PATCH 1/4] ipmi: Clean up the error handling for channel config errors minyard
2014-10-06 19:17 ` [PATCH 2/4] ipmi/of: Don't use unavailable interfaces minyard
2014-10-06 19:17 ` [PATCH 3/4] ipmi: work around gcc-4.9 build warning minyard
2014-10-06 19:17 ` minyard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412623073-6166-5-git-send-email-minyard@acm.org \
--to=minyard@acm.org \
--cc=cminyard@mvista.com \
--cc=indou.takao@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=openipmi-developer@lists.sourceforge.net \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®