From: Daniel Baluta <daniel.baluta@intel.com>
To: jic23@kernel.org
Cc: irina.tirdea@intel.com, daniel.baluta@intel.com,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH v2 1/7] iio: dummy: Add virtual registers for dummy device
Date: Thu, 9 Oct 2014 15:39:39 +0300 [thread overview]
Message-ID: <1412858385-11954-2-git-send-email-daniel.baluta@intel.com> (raw)
In-Reply-To: <1412858385-11954-1-git-send-email-daniel.baluta@intel.com>
We need a way to store events generated by iio_dummy_evgen module,
in order to correctly process IRQs in iio_simple_dummy_events.
For the moment, we add two registers:
* id_reg - ID register, stores the source of the event
* id_data - DATA register, stores the type of the event
e.g echo 4 > /sys/bus/iio/devices/iio_evgen/poke2
id_reg 0x02, id_data 0x04
This means, event of type 4 was generated by fake device 2.
We currently use a hardcoded mapping of virtual events to IIO events.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
---
drivers/staging/iio/iio_dummy_evgen.c | 16 ++++++++++++++++
drivers/staging/iio/iio_dummy_evgen.h | 6 ++++++
drivers/staging/iio/iio_simple_dummy.h | 2 ++
drivers/staging/iio/iio_simple_dummy_events.c | 23 ++++++++++++++++++-----
4 files changed, 42 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c
index 5a804f1..d44f138 100644
--- a/drivers/staging/iio/iio_dummy_evgen.c
+++ b/drivers/staging/iio/iio_dummy_evgen.c
@@ -33,6 +33,7 @@
* @base: base of irq range
* @enabled: mask of which irqs are enabled
* @inuse: mask of which irqs are connected
+ * @regs: irq regs we are faking
* @lock: protect the evgen state
*/
struct iio_dummy_eventgen {
@@ -40,6 +41,7 @@ struct iio_dummy_eventgen {
int base;
bool enabled[IIO_EVENTGEN_NO];
bool inuse[IIO_EVENTGEN_NO];
+ struct iio_dummy_regs regs[IIO_EVENTGEN_NO];
struct mutex lock;
};
@@ -136,6 +138,12 @@ int iio_dummy_evgen_release_irq(int irq)
}
EXPORT_SYMBOL_GPL(iio_dummy_evgen_release_irq);
+struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq)
+{
+ return &iio_evgen->regs[irq - iio_evgen->base];
+}
+EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_regs);
+
static void iio_dummy_evgen_free(void)
{
irq_free_descs(iio_evgen->base, IIO_EVENTGEN_NO);
@@ -153,6 +161,14 @@ static ssize_t iio_evgen_poke(struct device *dev,
size_t len)
{
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+ unsigned long event, ret;
+
+ ret = kstrtoul(buf, 10, &event);
+ if (ret)
+ return ret;
+
+ iio_evgen->regs[this_attr->address].reg_id = this_attr->address;
+ iio_evgen->regs[this_attr->address].reg_data = event;
if (iio_evgen->enabled[this_attr->address])
handle_nested_irq(iio_evgen->base + this_attr->address);
diff --git a/drivers/staging/iio/iio_dummy_evgen.h b/drivers/staging/iio/iio_dummy_evgen.h
index d8845e2..3ef3a1c 100644
--- a/drivers/staging/iio/iio_dummy_evgen.h
+++ b/drivers/staging/iio/iio_dummy_evgen.h
@@ -1,2 +1,8 @@
+struct iio_dummy_regs {
+ u32 reg_id;
+ u32 reg_data;
+};
+
+struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq);
int iio_dummy_evgen_get_irq(void);
int iio_dummy_evgen_release_irq(int irq);
diff --git a/drivers/staging/iio/iio_simple_dummy.h b/drivers/staging/iio/iio_simple_dummy.h
index b126196..1a74e26 100644
--- a/drivers/staging/iio/iio_simple_dummy.h
+++ b/drivers/staging/iio/iio_simple_dummy.h
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
struct iio_dummy_accel_calibscale;
+struct iio_dummy_regs;
/**
* struct iio_dummy_state - device instance specific state.
@@ -33,6 +34,7 @@ struct iio_dummy_state {
int accel_calibbias;
const struct iio_dummy_accel_calibscale *accel_calibscale;
struct mutex lock;
+ struct iio_dummy_regs *regs;
#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
int event_irq;
int event_val;
diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c
index 64b45b0..719dfa5 100644
--- a/drivers/staging/iio/iio_simple_dummy_events.c
+++ b/drivers/staging/iio/iio_simple_dummy_events.c
@@ -148,12 +148,23 @@ int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
static irqreturn_t iio_simple_dummy_event_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
+ struct iio_dummy_state *st = iio_priv(indio_dev);
+
+ dev_dbg(&indio_dev->dev, "id %x event %x\n",
+ st->regs->reg_id, st->regs->reg_data);
+
+ switch (st->regs->reg_data) {
+ case 0:
+ iio_push_event(indio_dev,
+ IIO_EVENT_CODE(IIO_VOLTAGE, 0, 0,
+ IIO_EV_DIR_RISING,
+ IIO_EV_TYPE_THRESH, 0, 0, 0),
+ iio_get_time_ns());
+ break;
+ default:
+ break;
+ }
- iio_push_event(indio_dev,
- IIO_EVENT_CODE(IIO_VOLTAGE, 0, 0,
- IIO_EV_DIR_RISING,
- IIO_EV_TYPE_THRESH, 0, 0, 0),
- iio_get_time_ns());
return IRQ_HANDLED;
}
@@ -179,6 +190,8 @@ int iio_simple_dummy_events_register(struct iio_dev *indio_dev)
ret = st->event_irq;
goto error_ret;
}
+ st->regs = iio_dummy_evgen_get_regs(st->event_irq);
+
ret = request_threaded_irq(st->event_irq,
NULL,
&iio_simple_dummy_event_handler,
--
1.9.1
next prev parent reply other threads:[~2014-10-09 12:35 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-09 12:39 [RFC PATCH v2 0/7] Introduce IIO interface for Android advanced features Daniel Baluta
2014-10-09 12:39 ` Daniel Baluta [this message]
2014-10-25 18:55 ` [RFC PATCH v2 1/7] iio: dummy: Add virtual registers for dummy device Jonathan Cameron
2014-10-25 19:49 ` Hartmut Knaack
2014-10-25 19:56 ` Jonathan Cameron
2014-10-25 19:58 ` Daniel Baluta
2014-10-09 12:39 ` [RFC PATCH v2 2/7] iio: core: Introduce IIO_ACTIVITY channel and TRANSITION event Daniel Baluta
2014-10-25 19:01 ` Jonathan Cameron
2014-10-25 19:19 ` Daniel Baluta
2014-10-25 19:28 ` Jonathan Cameron
2014-10-09 12:39 ` [RFC PATCH v2 3/7] iio: core: Introduce IIO_EV_DIR_NONE Daniel Baluta
2014-10-25 19:02 ` Jonathan Cameron
2014-10-09 12:39 ` [RFC PATCH v2 4/7] iio: core: Introduce STEPS channel type, ENABLE mask and INSTANCE event Daniel Baluta
2014-10-24 22:31 ` Hartmut Knaack
2014-10-25 19:18 ` Jonathan Cameron
2014-10-28 10:22 ` Daniel Baluta
2014-10-25 19:11 ` Jonathan Cameron
2014-10-09 12:39 ` [RFC PATCH v2 5/7] iio: core: Introduce HEIGHT channel type Daniel Baluta
2014-10-25 19:24 ` Jonathan Cameron
2014-10-09 12:39 ` [RFC PATCH v2 6/7] iio: dummy: Demonstrate the usage of new channel types Daniel Baluta
2014-10-25 19:27 ` Jonathan Cameron
2014-10-09 12:39 ` [RFC PATCH v2 7/7] iio: event_monitor: Add support for " Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412858385-11954-2-git-send-email-daniel.baluta@intel.com \
--to=daniel.baluta@intel.com \
--cc=irina.tirdea@intel.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome