From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: dmaengine@vger.kernel.org, Vinod Koul <vinod.koul@intel.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Antoine Ténart" <antoine@free-electrons.com>,
lars@metafoo.de, "Russell King" <linux@arm.linux.org.uk>,
"Maxime Ripard" <maxime.ripard@free-electrons.com>,
"Dan Williams" <dan.j.williams@intel.com>
Subject: [PATCH v2 22/53] dmaengine: k3: Split device_control
Date: Thu, 16 Oct 2014 12:17:21 +0200 [thread overview]
Message-ID: <1413454672-27400-23-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1413454672-27400-1-git-send-email-maxime.ripard@free-electrons.com>
Split the device_control callback of the Hisilicon K3 DMA driver to make use
of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/dma/k3dma.c | 197 ++++++++++++++++++++++++++++------------------------
1 file changed, 107 insertions(+), 90 deletions(-)
diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index a1f911aaf220..fb4dd2cffd80 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -441,7 +441,7 @@ static struct dma_async_tx_descriptor *k3_dma_prep_memcpy(
num = 0;
if (!c->ccfg) {
- /* default is memtomem, without calling device_control */
+ /* default is memtomem, without calling device_config */
c->ccfg = CX_CFG_SRCINCR | CX_CFG_DSTINCR | CX_CFG_EN;
c->ccfg |= (0xf << 20) | (0xf << 24); /* burst = 16 */
c->ccfg |= (0x3 << 12) | (0x3 << 16); /* width = 64 bit */
@@ -523,112 +523,126 @@ static struct dma_async_tx_descriptor *k3_dma_prep_slave_sg(
return vchan_tx_prep(&c->vc, &ds->vd, flags);
}
-static int k3_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
- unsigned long arg)
+static int k3_dma_config(struct dma_chan *chan,
+ struct dma_slave_config *cfg)
+{
+ struct k3_dma_chan *c = to_k3_chan(chan);
+ u32 maxburst = 0, val = 0;
+ enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
+
+ if (cfg == NULL)
+ return -EINVAL;
+ c->dir = cfg->direction;
+ if (c->dir == DMA_DEV_TO_MEM) {
+ c->ccfg = CX_CFG_DSTINCR;
+ c->dev_addr = cfg->src_addr;
+ maxburst = cfg->src_maxburst;
+ width = cfg->src_addr_width;
+ } else if (c->dir == DMA_MEM_TO_DEV) {
+ c->ccfg = CX_CFG_SRCINCR;
+ c->dev_addr = cfg->dst_addr;
+ maxburst = cfg->dst_maxburst;
+ width = cfg->dst_addr_width;
+ }
+ switch (width) {
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ case DMA_SLAVE_BUSWIDTH_8_BYTES:
+ val = __ffs(width);
+ break;
+ default:
+ val = 3;
+ break;
+ }
+ c->ccfg |= (val << 12) | (val << 16);
+
+ if ((maxburst == 0) || (maxburst > 16))
+ val = 16;
+ else
+ val = maxburst - 1;
+ c->ccfg |= (val << 20) | (val << 24);
+ c->ccfg |= CX_CFG_MEM2PER | CX_CFG_EN;
+
+ /* specific request line */
+ c->ccfg |= c->vc.chan.chan_id << 4;
+
+ return 0;
+}
+
+static int k3_dma_terminate_all(struct dma_chan *chan)
{
struct k3_dma_chan *c = to_k3_chan(chan);
struct k3_dma_dev *d = to_k3_dma(chan->device);
- struct dma_slave_config *cfg = (void *)arg;
struct k3_dma_phy *p = c->phy;
unsigned long flags;
- u32 maxburst = 0, val = 0;
- enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
LIST_HEAD(head);
- switch (cmd) {
- case DMA_SLAVE_CONFIG:
- if (cfg == NULL)
- return -EINVAL;
- c->dir = cfg->direction;
- if (c->dir == DMA_DEV_TO_MEM) {
- c->ccfg = CX_CFG_DSTINCR;
- c->dev_addr = cfg->src_addr;
- maxburst = cfg->src_maxburst;
- width = cfg->src_addr_width;
- } else if (c->dir == DMA_MEM_TO_DEV) {
- c->ccfg = CX_CFG_SRCINCR;
- c->dev_addr = cfg->dst_addr;
- maxburst = cfg->dst_maxburst;
- width = cfg->dst_addr_width;
- }
- switch (width) {
- case DMA_SLAVE_BUSWIDTH_1_BYTE:
- case DMA_SLAVE_BUSWIDTH_2_BYTES:
- case DMA_SLAVE_BUSWIDTH_4_BYTES:
- case DMA_SLAVE_BUSWIDTH_8_BYTES:
- val = __ffs(width);
- break;
- default:
- val = 3;
- break;
- }
- c->ccfg |= (val << 12) | (val << 16);
+ dev_dbg(d->slave.dev, "vchan %p: terminate all\n", &c->vc);
- if ((maxburst == 0) || (maxburst > 16))
- val = 16;
- else
- val = maxburst - 1;
- c->ccfg |= (val << 20) | (val << 24);
- c->ccfg |= CX_CFG_MEM2PER | CX_CFG_EN;
+ /* Prevent this channel being scheduled */
+ spin_lock(&d->lock);
+ list_del_init(&c->node);
+ spin_unlock(&d->lock);
- /* specific request line */
- c->ccfg |= c->vc.chan.chan_id << 4;
- break;
+ /* Clear the tx descriptor lists */
+ spin_lock_irqsave(&c->vc.lock, flags);
+ vchan_get_all_descriptors(&c->vc, &head);
+ if (p) {
+ /* vchan is assigned to a pchan - stop the channel */
+ k3_dma_terminate_chan(p, d);
+ c->phy = NULL;
+ p->vchan = NULL;
+ p->ds_run = p->ds_done = NULL;
+ }
+ spin_unlock_irqrestore(&c->vc.lock, flags);
+ vchan_dma_desc_free_list(&c->vc, &head);
- case DMA_TERMINATE_ALL:
- dev_dbg(d->slave.dev, "vchan %p: terminate all\n", &c->vc);
+ return 0;
+}
- /* Prevent this channel being scheduled */
- spin_lock(&d->lock);
- list_del_init(&c->node);
- spin_unlock(&d->lock);
+static int k3_dma_pause(struct dma_chan *chan)
+{
+ struct k3_dma_chan *c = to_k3_chan(chan);
+ struct k3_dma_dev *d = to_k3_dma(chan->device);
+ struct k3_dma_phy *p = c->phy;
- /* Clear the tx descriptor lists */
- spin_lock_irqsave(&c->vc.lock, flags);
- vchan_get_all_descriptors(&c->vc, &head);
+ dev_dbg(d->slave.dev, "vchan %p: pause\n", &c->vc);
+ if (c->status == DMA_IN_PROGRESS) {
+ c->status = DMA_PAUSED;
if (p) {
- /* vchan is assigned to a pchan - stop the channel */
- k3_dma_terminate_chan(p, d);
- c->phy = NULL;
- p->vchan = NULL;
- p->ds_run = p->ds_done = NULL;
+ k3_dma_pause_dma(p, false);
+ } else {
+ spin_lock(&d->lock);
+ list_del_init(&c->node);
+ spin_unlock(&d->lock);
}
- spin_unlock_irqrestore(&c->vc.lock, flags);
- vchan_dma_desc_free_list(&c->vc, &head);
- break;
+ }
- case DMA_PAUSE:
- dev_dbg(d->slave.dev, "vchan %p: pause\n", &c->vc);
- if (c->status == DMA_IN_PROGRESS) {
- c->status = DMA_PAUSED;
- if (p) {
- k3_dma_pause_dma(p, false);
- } else {
- spin_lock(&d->lock);
- list_del_init(&c->node);
- spin_unlock(&d->lock);
- }
- }
- break;
+ return 0;
+}
- case DMA_RESUME:
- dev_dbg(d->slave.dev, "vchan %p: resume\n", &c->vc);
- spin_lock_irqsave(&c->vc.lock, flags);
- if (c->status == DMA_PAUSED) {
- c->status = DMA_IN_PROGRESS;
- if (p) {
- k3_dma_pause_dma(p, true);
- } else if (!list_empty(&c->vc.desc_issued)) {
- spin_lock(&d->lock);
- list_add_tail(&c->node, &d->chan_pending);
- spin_unlock(&d->lock);
- }
+static int k3_dma_resume(struct dma_chan *chan)
+{
+ struct k3_dma_chan *c = to_k3_chan(chan);
+ struct k3_dma_dev *d = to_k3_dma(chan->device);
+ struct k3_dma_phy *p = c->phy;
+ unsigned long flags;
+
+ dev_dbg(d->slave.dev, "vchan %p: resume\n", &c->vc);
+ spin_lock_irqsave(&c->vc.lock, flags);
+ if (c->status == DMA_PAUSED) {
+ c->status = DMA_IN_PROGRESS;
+ if (p) {
+ k3_dma_pause_dma(p, true);
+ } else if (!list_empty(&c->vc.desc_issued)) {
+ spin_lock(&d->lock);
+ list_add_tail(&c->node, &d->chan_pending);
+ spin_unlock(&d->lock);
}
- spin_unlock_irqrestore(&c->vc.lock, flags);
- break;
- default:
- return -ENXIO;
}
+ spin_unlock_irqrestore(&c->vc.lock, flags);
+
return 0;
}
@@ -720,7 +734,10 @@ static int k3_dma_probe(struct platform_device *op)
d->slave.device_prep_dma_memcpy = k3_dma_prep_memcpy;
d->slave.device_prep_slave_sg = k3_dma_prep_slave_sg;
d->slave.device_issue_pending = k3_dma_issue_pending;
- d->slave.device_control = k3_dma_control;
+ d->slave.device_config = k3_dma_config;
+ d->slave.device_pause = k3_dma_pause;
+ d->slave.device_resume = k3_dma_resume;
+ d->slave.device_terminate_all = k3_dma_terminate_all;
d->slave.copy_align = DMA_ALIGN;
d->slave.chancnt = d->dma_requests;
--
2.1.1
next prev parent reply other threads:[~2014-10-16 10:20 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-16 10:16 [PATCH v2 00/53] dmaengine: Implement generic slave capabilities retrieval Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 01/53] dmaengine: Make the destination abbreviation coherent Maxime Ripard
2014-10-16 10:25 ` Mark Brown
2014-10-16 10:32 ` Laurent Pinchart
2014-10-16 15:26 ` Stephen Warren
2014-10-16 10:17 ` [PATCH v2 02/53] dmaengine: Make channel allocation callbacks optional Maxime Ripard
2014-10-16 10:35 ` Laurent Pinchart
2014-10-16 10:17 ` [PATCH v2 03/53] dmaengine: Introduce a device_config callback Maxime Ripard
2014-10-16 10:44 ` Laurent Pinchart
2014-10-16 10:17 ` [PATCH v2 04/53] dmaengine: split out pause/resume operations from device_control Maxime Ripard
2014-10-16 10:45 ` Laurent Pinchart
2014-10-16 10:17 ` [PATCH v2 05/53] dmaengine: Add device_terminate_all callback Maxime Ripard
2014-10-16 10:46 ` Laurent Pinchart
2014-10-16 10:17 ` [PATCH v2 06/53] dmaengine: Create a generic dma_slave_caps callback Maxime Ripard
2014-10-16 16:15 ` Laurent Pinchart
2014-10-16 16:24 ` Maxime Ripard
2014-10-22 20:16 ` Laurent Pinchart
2014-10-23 8:08 ` Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 07/53] dmaengine: Move slave caps to dma_device Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 08/53] dmaengine: pl08x: Split device_control Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 09/53] dmaengine: hdmac: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 10/53] dmaengine: bcm2835: " Maxime Ripard
2014-10-16 15:27 ` Stephen Warren
2014-10-16 10:17 ` [PATCH v2 11/53] dmaengine: coh901318: " Maxime Ripard
2014-10-28 14:40 ` Linus Walleij
2014-10-16 10:17 ` [PATCH v2 12/53] dmaengine: cppi41: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 13/53] dmaengine: jz4740: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 14/53] dmaengine: dw: " Maxime Ripard
2014-10-16 11:17 ` Andy Shevchenko
2014-10-16 14:05 ` Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 15/53] dmaengine: edma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 16/53] dmaengine: ep93xx: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 17/53] dmaengine: fsl-edma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 18/53] dmaengine: imx: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 19/53] dmaengine: imx-sdma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 20/53] dmaengine: intel-mid-dma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 21/53] dmaengine: ipu-idmac: " Maxime Ripard
2014-10-16 10:17 ` Maxime Ripard [this message]
2014-10-16 10:17 ` [PATCH v2 23/53] dmaengine: mmp-pdma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 24/53] dmaengine: mmp-tdma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 25/53] dmaengine: moxart: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 26/53] dmaengine: fsl-dma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 27/53] dmaengine: mpc512x: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 28/53] dmaengine: mxs: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 29/53] dmaengine: nbpfaxi: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 30/53] dmaengine: omap: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 31/53] dmaengine: pl330: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 32/53] dmaengine: bam-dma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 33/53] dmaengine: s3c24xx: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 34/53] dmaengine: sa11x0: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 35/53] dmaengine: sh: " Maxime Ripard
2014-10-16 16:17 ` Laurent Pinchart
2014-10-16 10:17 ` [PATCH v2 36/53] dmaengine: sirf: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 37/53] dmaengine: sun6i: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 38/53] dmaengine: d40: " Maxime Ripard
2014-10-28 14:41 ` Linus Walleij
2014-10-16 10:17 ` [PATCH v2 39/53] dmaengine: tegra20: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 40/53] dmaengine: xilinx: " Maxime Ripard
2014-10-16 16:20 ` Laurent Pinchart
2014-10-16 10:17 ` [PATCH v2 41/53] dmaengine: mv_xor: Remove device_control Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 42/53] dmaengine: pch-dma: Rename device_control Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 43/53] dmaengine: td: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 44/53] dmaengine: txx9: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 45/53] dmaengine: bcm2835: Declare slave capabilities for the generic code Maxime Ripard
2014-10-16 15:27 ` Stephen Warren
2014-10-16 10:17 ` [PATCH v2 46/53] dmaengine: fsl-edma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 47/53] dmaengine: edma: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 48/53] dmaengine: nbpfaxi: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 49/53] dmaengine: omap: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 50/53] dmaengine: pl330: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 51/53] dmaengine: sirf: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 52/53] dmaengine: sun6i: " Maxime Ripard
2014-10-16 10:17 ` [PATCH v2 53/53] dmaengine: Mark device_control and device_slave_caps as deprecated Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413454672-27400-23-git-send-email-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=antoine@free-electrons.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®