mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Fabio Falzoi <fabio.falzoi84@gmail.com>
To: gregkh@linuxfoundation.org
Cc: micky_ching@realsil.com.cn, joe@perches.com,
	giedrius.statkevicius@gmail.com, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org,
	Fabio Falzoi <fabio.falzoi84@gmail.com>
Subject: [PATCH 1/2] Staging: rts5208: helper function to manage aspm during reset
Date: Sun, 19 Oct 2014 11:55:53 +0200	[thread overview]
Message-ID: <1413712554-4872-2-git-send-email-fabio.falzoi84@gmail.com> (raw)
In-Reply-To: <1413712554-4872-1-git-send-email-fabio.falzoi84@gmail.com>

Define the helper function rtsx_reset_aspm to shorten the
rtsx_reset_chip code and get rid of the LONG_LINE checkpatch warnings.

Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
---
 drivers/staging/rts5208/rtsx_chip.c | 72 ++++++++++++++++++++-----------------
 1 file changed, 39 insertions(+), 33 deletions(-)

diff --git a/drivers/staging/rts5208/rtsx_chip.c b/drivers/staging/rts5208/rtsx_chip.c
index a7ade8b..17f68b8 100644
--- a/drivers/staging/rts5208/rtsx_chip.c
+++ b/drivers/staging/rts5208/rtsx_chip.c
@@ -226,6 +226,42 @@ static int rtsx_pre_handle_sdio_new(struct rtsx_chip *chip)
 }
 #endif
 
+static int rtsx_reset_aspm(struct rtsx_chip *chip)
+{
+	int ret;
+
+	if (chip->dynamic_aspm) {
+		if (!CHK_SDIO_EXIST(chip) || !CHECK_PID(chip, 0x5288))
+			return STATUS_SUCCESS;
+
+		ret = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF,
+					chip->aspm_l0s_l1_en);
+		if (ret != STATUS_SUCCESS)
+			TRACE_RET(chip, STATUS_FAIL);
+
+		return STATUS_SUCCESS;
+	}
+
+	if (CHECK_PID(chip, 0x5208))
+		RTSX_WRITE_REG(chip, ASPM_FORCE_CTL, 0xFF, 0x3F);
+	ret = rtsx_write_config_byte(chip, LCTLR, chip->aspm_l0s_l1_en);
+	if (ret != STATUS_SUCCESS)
+		TRACE_RET(chip, STATUS_FAIL);
+
+	chip->aspm_level[0] = chip->aspm_l0s_l1_en;
+	if (CHK_SDIO_EXIST(chip)) {
+		chip->aspm_level[1] = chip->aspm_l0s_l1_en;
+		ret = rtsx_write_cfg_dw(chip, CHECK_PID(chip, 0x5288) ? 2 : 1,
+					0xC0, 0xFF, chip->aspm_l0s_l1_en);
+		if (ret != STATUS_SUCCESS)
+			TRACE_RET(chip, STATUS_FAIL);
+	}
+
+	chip->aspm_enabled = 1;
+
+	return STATUS_SUCCESS;
+}
+
 int rtsx_reset_chip(struct rtsx_chip *chip)
 {
 	int retval;
@@ -288,39 +324,9 @@ int rtsx_reset_chip(struct rtsx_chip *chip)
 
 	/* Enable ASPM */
 	if (chip->aspm_l0s_l1_en) {
-		if (chip->dynamic_aspm) {
-			if (CHK_SDIO_EXIST(chip)) {
-				if (CHECK_PID(chip, 0x5288)) {
-					retval = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
-					if (retval != STATUS_SUCCESS)
-						TRACE_RET(chip, STATUS_FAIL);
-				}
-			}
-		} else {
-			if (CHECK_PID(chip, 0x5208))
-				RTSX_WRITE_REG(chip, ASPM_FORCE_CTL,
-					0xFF, 0x3F);
-
-			retval = rtsx_write_config_byte(chip, LCTLR,
-							chip->aspm_l0s_l1_en);
-			if (retval != STATUS_SUCCESS)
-				TRACE_RET(chip, STATUS_FAIL);
-
-			chip->aspm_level[0] = chip->aspm_l0s_l1_en;
-			if (CHK_SDIO_EXIST(chip)) {
-				chip->aspm_level[1] = chip->aspm_l0s_l1_en;
-				if (CHECK_PID(chip, 0x5288))
-					retval = rtsx_write_cfg_dw(chip, 2, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
-				else
-					retval = rtsx_write_cfg_dw(chip, 1, 0xC0, 0xFF, chip->aspm_l0s_l1_en);
-
-				if (retval != STATUS_SUCCESS)
-					TRACE_RET(chip, STATUS_FAIL);
-
-			}
-
-			chip->aspm_enabled = 1;
-		}
+		retval = rtsx_reset_aspm(chip);
+		if (retval != STATUS_SUCCESS)
+			TRACE_RET(chip, STATUS_FAIL);
 	} else {
 		if (chip->asic_code && CHECK_PID(chip, 0x5208)) {
 			retval = rtsx_write_phy_register(chip, 0x07, 0x0129);
-- 
2.1.1


  reply	other threads:[~2014-10-19  9:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-19  9:55 [PATCH 0/2] Staging: rts5208: rtsx_reset_chip style clean up Fabio Falzoi
2014-10-19  9:55 ` Fabio Falzoi [this message]
2014-10-19  9:55 ` [PATCH 2/2] Staging: rts5208: helper function to enable interrupts during reset Fabio Falzoi
2014-10-19 10:48 ` [PATCH 0/2] Staging: rts5208: rtsx_reset_chip style clean up Giedrius Statkevicius

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413712554-4872-2-git-send-email-fabio.falzoi84@gmail.com \
    --to=fabio.falzoi84@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=giedrius.statkevicius@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=micky_ching@realsil.com.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome