From: Christoph Hellwig <hch@lst.de>
To: Chandra Seetharaman <sekharan@us.ibm.com>,
Hannes Reinecke <hare@suse.de>,
Mike Christie <michaelc@cs.wisc.edu>
Cc: Sean Stewart <Sean.Stewart@netapp.com>,
Bart Van Assche <bvanassche@acm.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/6] scsi: remove struct scsi_dh_devlist
Date: Sun, 19 Oct 2014 18:00:01 +0200 [thread overview]
Message-ID: <1413734404-1426-4-git-send-email-hch@lst.de> (raw)
In-Reply-To: <1413734404-1426-1-git-send-email-hch@lst.de>
All drivers now do their own matching, so there is no more need to expose
a device list as part of the interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/scsi/device_handler/scsi_dh_emc.c | 6 ++++--
drivers/scsi/device_handler/scsi_dh_hp_sw.c | 6 ++++--
drivers/scsi/device_handler/scsi_dh_rdac.c | 6 ++++--
include/scsi/scsi_device.h | 6 ------
4 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index c2e26cd..800deb7 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -622,7 +622,10 @@ done:
return result;
}
-static const struct scsi_dh_devlist clariion_dev_list[] = {
+static const struct {
+ char *vendor;
+ char *model;
+} clariion_dev_list[] = {
{"DGC", "RAID"},
{"DGC", "DISK"},
{"DGC", "VRAID"},
@@ -653,7 +656,6 @@ static void clariion_bus_detach(struct scsi_device *sdev);
static struct scsi_device_handler clariion_dh = {
.name = CLARIION_NAME,
.module = THIS_MODULE,
- .devlist = clariion_dev_list,
.attach = clariion_bus_attach,
.detach = clariion_bus_detach,
.check_sense = clariion_check_sense,
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 040998c..aa40fcb 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -311,7 +311,10 @@ static int hp_sw_activate(struct scsi_device *sdev,
return 0;
}
-static const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
+static const struct {
+ char *vendor;
+ char *model;
+} hp_sw_dh_data_list[] = {
{"COMPAQ", "MSA1000 VOLUME"},
{"COMPAQ", "HSV110"},
{"HP", "HSV100"},
@@ -343,7 +346,6 @@ static void hp_sw_bus_detach(struct scsi_device *sdev);
static struct scsi_device_handler hp_sw_dh = {
.name = HP_SW_NAME,
.module = THIS_MODULE,
- .devlist = hp_sw_dh_data_list,
.attach = hp_sw_bus_attach,
.detach = hp_sw_bus_detach,
.activate = hp_sw_activate,
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index ef8caaa..8b09528 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -778,7 +778,10 @@ static int rdac_check_sense(struct scsi_device *sdev,
return SCSI_RETURN_NOT_HANDLED;
}
-static const struct scsi_dh_devlist rdac_dev_list[] = {
+static const struct {
+ char *vendor;
+ char *model;
+} rdac_dev_list[] = {
{"IBM", "1722"},
{"IBM", "1724"},
{"IBM", "1726"},
@@ -830,7 +833,6 @@ static void rdac_bus_detach(struct scsi_device *sdev);
static struct scsi_device_handler rdac_dh = {
.name = RDAC_NAME,
.module = THIS_MODULE,
- .devlist = rdac_dev_list,
.prep_fn = rdac_prep_fn,
.check_sense = rdac_check_sense,
.attach = rdac_bus_attach,
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index fb46864..ba6c9b7 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -201,11 +201,6 @@ struct scsi_device {
unsigned long sdev_data[0];
} __attribute__((aligned(sizeof(unsigned long))));
-struct scsi_dh_devlist {
- char *vendor;
- char *model;
-};
-
typedef void (*activate_complete)(void *, int);
struct scsi_device_handler {
/* Used by the infrastructure */
@@ -214,7 +209,6 @@ struct scsi_device_handler {
/* Filled by the hardware handler */
struct module *module;
const char *name;
- const struct scsi_dh_devlist *devlist;
int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
int (*attach)(struct scsi_device *);
void (*detach)(struct scsi_device *);
--
1.9.1
next prev parent reply other threads:[~2014-10-19 15:58 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-19 15:59 device handler cleanups Christoph Hellwig
2014-10-19 15:59 ` [PATCH 1/6] scsi_dh: get module reference outside of device handler Christoph Hellwig
2014-10-20 6:01 ` Hannes Reinecke
2014-10-20 6:53 ` Christoph Hellwig
2014-10-20 8:06 ` Hannes Reinecke
2014-10-19 16:00 ` [PATCH 2/6] scsi: use container_of to get at device handler private data Christoph Hellwig
2014-10-20 6:02 ` Hannes Reinecke
2014-10-19 16:00 ` Christoph Hellwig [this message]
2014-10-20 6:03 ` [PATCH 3/6] scsi: remove struct scsi_dh_devlist Hannes Reinecke
2014-10-19 16:00 ` [PATCH 4/6] scsi: device handlers must have attach and detach methods Christoph Hellwig
2014-10-20 6:04 ` Hannes Reinecke
2014-10-19 16:00 ` [PATCH 5/6] scsi_dh_hp_sw: fix return value on failed allocation Christoph Hellwig
2014-10-20 6:04 ` Hannes Reinecke
2014-10-19 16:00 ` [PATCH 6/6] scsi: handle more device handler setup/teardown in common code Christoph Hellwig
2014-10-20 6:06 ` Hannes Reinecke
2014-10-28 17:53 ` Mike Christie
2014-10-30 9:00 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413734404-1426-4-git-send-email-hch@lst.de \
--to=hch@lst.de \
--cc=Sean.Stewart@netapp.com \
--cc=bvanassche@acm.org \
--cc=hare@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=michaelc@cs.wisc.edu \
--cc=sekharan@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®