[PATCH v3 6/6] ARM: dts: add RK3288 suspend support

[zyw@rock-chips.com]

From: Chris Zhong <zyw@rock-chips.com>

add pmu_intmem node for suspend, add global_pwroff pinctrl.
The pmu_intmem is used to store the resume code.
global_pwroff is held low level at work, it would be pull to high
when entering suspend. PMICs can get this singal, then shut down
some power rails. So please reference the global_pwroff pinctrl
as part of the PMIC config.

Signed-off-by: Tony Xie <xxx@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v3: None
Changes in v2:
- put "rockchip,rk3288-pmu-sram" to first

 arch/arm/boot/dts/rk3288.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 5950b0a..fcbe929 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -241,6 +241,11 @@
 		status = "disabled";
 	};
 
+	pmu_intmem@ff720000 {
+		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+		reg = <0xff720000 0x4000>;
+	};
+
 	pmu: power-management@ff730000 {
 		compatible = "rockchip,rk3288-pmu", "syscon";
 		reg = <0xff730000 0x100>;
@@ -421,6 +426,12 @@
 			bias-disable;
 		};
 
+		sleep {
+			global_pwroff: global-pwroff {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
-- 
1.7.9.5