[PATCH] drm/panel: simple: Update calls to gpiod_get*()

[Alexandre Courbot <acourbot@nvidia.com>]

Add the new flags argument to calls of (devm_)gpiod_get*() and
remove any direction setting code afterwards.

Currently both forms (with or without the flags argument)
are valid thanks to transitional macros in
<linux/gpio/consumer.h>. These macros will be removed once
all consumers are updated and the flags argument will become
compulsary.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
 drivers/gpu/drm/panel/panel-simple.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 23de22f8c820..83d93062930d 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -247,21 +247,14 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 	if (IS_ERR(panel->supply))
 		return PTR_ERR(panel->supply);
 
-	panel->enable_gpio = devm_gpiod_get_optional(dev, "enable");
+	panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
+						     GPIOD_OUT_LOW);
 	if (IS_ERR(panel->enable_gpio)) {
 		err = PTR_ERR(panel->enable_gpio);
 		dev_err(dev, "failed to request GPIO: %d\n", err);
 		return err;
 	}
 
-	if (panel->enable_gpio) {
-		err = gpiod_direction_output(panel->enable_gpio, 0);
-		if (err < 0) {
-			dev_err(dev, "failed to setup GPIO: %d\n", err);
-			return err;
-		}
-	}
-
 	backlight = of_parse_phandle(dev->of_node, "backlight", 0);
 	if (backlight) {
 		panel->backlight = of_find_backlight_by_node(backlight);
-- 
2.1.2