From: Marc Zyngier <marc.zyngier@arm.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>
Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] irqchip: GICv3: Convert to EOImode == 1
Date: Sat, 25 Oct 2014 12:06:55 +0100 [thread overview]
Message-ID: <1414235215-10468-4-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1414235215-10468-1-git-send-email-marc.zyngier@arm.com>
So far, GICv3 has been used in with EOImode == 0. The effect of this
mode is to perform the priority drop and the deactivation of the
interrupt at the same time.
While this works perfectly for Linux (we only have a single priority),
it causes issues when an interrupt is forwarded to a guest, and when
we want the guest to perform the EOI itself. This is also rather
inefficient for threaded interrupts, as it forces us to hit the
distributor (which is slower, specially when using virtualization).
For this case, the GIC architecture provides EOImode == 1, where:
- A write to ICC_EOIR1_EL1 drops the priority of the interrupt and leaves
it active. Other interrupts at the same priority level can now be taken,
but the active interrupt cannot be taken again
- A write to ICC_DIR_EL1 marks the interrupt as inactive, meaning it can
now be taken again.
This patch converts the driver to this new mode when virtualization is
enabled.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/irqchip/irq-gic-v3.c | 30 ++++++++++++++++++++++++++++--
include/linux/irqchip/arm-gic-v3.h | 10 ++++++++++
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 666c14e..c7f8a25 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -30,6 +30,7 @@
#include <asm/cputype.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
+#include <asm/virt.h>
#include "irq-gic-common.h"
#include "irqchip.h"
@@ -45,6 +46,7 @@ struct gic_chip_data {
};
static struct gic_chip_data gic_data __read_mostly;
+static bool supports_deactivate = false;
#define gic_data_rdist() (this_cpu_ptr(gic_data.rdist))
#define gic_data_rdist_rd_base() (*gic_data_rdist())
@@ -289,6 +291,16 @@ static void gic_eoi_irq(struct irq_data *d)
gic_write_eoir(gic_irq(d));
}
+static void gic_priority_drop_irq(struct irq_data *d)
+{
+ gic_write_eoir(gic_irq(d));
+}
+
+static void gic_deactivate_irq(struct irq_data *d)
+{
+ gic_write_dir(gic_irq(d));
+}
+
static int gic_set_type(struct irq_data *d, unsigned int type)
{
unsigned int irq = gic_irq(d);
@@ -345,6 +357,8 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs
}
if (irqnr < 16) {
gic_write_eoir(irqnr);
+ if (supports_deactivate)
+ gic_write_dir(irqnr);
#ifdef CONFIG_SMP
handle_IPI(irqnr, regs);
#else
@@ -441,8 +455,13 @@ static void gic_cpu_sys_reg_init(void)
/* Set priority mask register */
gic_write_pmr(DEFAULT_PMR_VALUE);
- /* EOI deactivates interrupt too (mode 0) */
- gic_write_ctlr(ICC_CTLR_EL1_EOImode_drop_dir);
+ if (supports_deactivate) {
+ /* EOI drops priority only (mode 1) */
+ gic_write_ctlr(ICC_CTLR_EL1_EOImode_drop);
+ } else {
+ /* EOI deactivates interrupt too (mode 0) */
+ gic_write_ctlr(ICC_CTLR_EL1_EOImode_drop_dir);
+ }
/* ... and let's hit the road... */
gic_write_grpen1(1);
@@ -738,6 +757,13 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
if (of_property_read_u64(node, "redistributor-stride", &redist_stride))
redist_stride = 0;
+ if (is_hyp_mode_available()) {
+ supports_deactivate = true;
+ gic_chip.flags = IRQCHIP_EOI_THREADED,
+ gic_chip.irq_priority_drop = gic_priority_drop_irq;
+ gic_chip.irq_eoi = gic_deactivate_irq;
+ }
+
gic_data.dist_base = dist_base;
gic_data.redist_base = redist_base;
gic_data.redist_regions = redist_regions;
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index 03a4ea3..9875502 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -74,6 +74,9 @@
#define GICR_SYNCR 0x00C0
#define GICR_MOVLPIR 0x0100
#define GICR_MOVALLR 0x0110
+#define GICR_ISACTIVER GICD_ISACTIVER
+#define GICR_ICACTIVER GICD_ICACTIVER
+#define GICR_IDREGS GICD_IDREGS
#define GICR_PIDR2 GICD_PIDR2
#define GICR_WAKER_ProcessorSleep (1U << 1)
@@ -128,6 +131,7 @@
#define ICH_VMCR_PMR_MASK (0xffUL << ICH_VMCR_PMR_SHIFT)
#define ICC_EOIR1_EL1 sys_reg(3, 0, 12, 12, 1)
+#define ICC_DIR_EL1 sys_reg(3, 0, 12, 11, 1)
#define ICC_IAR1_EL1 sys_reg(3, 0, 12, 12, 0)
#define ICC_SGI1R_EL1 sys_reg(3, 0, 12, 11, 5)
#define ICC_PMR_EL1 sys_reg(3, 0, 4, 6, 0)
@@ -195,6 +199,12 @@ static inline void gic_write_eoir(u64 irq)
isb();
}
+static inline void gic_write_dir(u64 irq)
+{
+ asm volatile("msr_s " __stringify(ICC_DIR_EL1) ", %0" : : "r" (irq));
+ isb();
+}
+
#endif
#endif
--
2.1.0
prev parent reply other threads:[~2014-10-25 21:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-25 11:06 [PATCH 0/3] genirq: Add support for "split-EOI" irqchips Marc Zyngier
2014-10-25 11:06 ` [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers Marc Zyngier
2014-10-25 20:27 ` Thomas Gleixner
2014-10-25 20:40 ` Thomas Gleixner
2014-10-27 15:42 ` Marc Zyngier
2014-10-28 15:32 ` Thomas Gleixner
2014-10-28 19:41 ` Marc Zyngier
2014-10-28 20:14 ` Thomas Gleixner
2014-10-29 10:11 ` Marc Zyngier
2014-10-29 10:26 ` Thomas Gleixner
2014-10-30 14:15 ` Marc Zyngier
2014-10-30 15:59 ` Thomas Gleixner
2014-10-25 11:06 ` [PATCH 2/3] irqchip: GIC: Convert to EOImode == 1 Marc Zyngier
2014-10-25 11:06 ` Marc Zyngier [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414235215-10468-4-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®