mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
	"Russell King" <rmk+kernel@arm.linux.org.uk>,
	"Frank Li" <Frank.Li@freescale.com>,
	"Fabio Estevam" <fabio.estevam@freescale.com>,
	linux-kernel@vger.kernel.org,
	"Lothar Waßmann" <LW@KARO-electronics.de>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 1/9] net: fec: indentation cleanup
Date: Tue, 28 Oct 2014 14:22:56 +0100	[thread overview]
Message-ID: <1414502584-10583-2-git-send-email-LW@KARO-electronics.de> (raw)
In-Reply-To: <1414502584-10583-1-git-send-email-LW@KARO-electronics.de>

consistently use TABs for indentation

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 drivers/net/ethernet/freescale/fec.h |  108 +++++++++++++++++-----------------
 1 file changed, 54 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 9af296a..3047db4 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -213,60 +213,60 @@ struct bufdesc_ex {
  *	The following definitions courtesy of commproc.h, which where
  *	Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
  */
-#define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
-#define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
-#define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
-#define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
-#define BD_SC_CM        ((ushort)0x0200)        /* Continuous mode */
-#define BD_SC_ID        ((ushort)0x0100)        /* Rec'd too many idles */
-#define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
-#define BD_SC_BR        ((ushort)0x0020)        /* Break received */
-#define BD_SC_FR        ((ushort)0x0010)        /* Framing error */
-#define BD_SC_PR        ((ushort)0x0008)        /* Parity error */
-#define BD_SC_OV        ((ushort)0x0002)        /* Overrun */
-#define BD_SC_CD        ((ushort)0x0001)        /* ?? */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_CM	((ushort)0x0200)	/* Continuous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_CD	((ushort)0x0001)	/* ?? */
 
 /* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY        ((ushort)0x8000)
-#define BD_ENET_RX_WRAP         ((ushort)0x2000)
-#define BD_ENET_RX_INTR         ((ushort)0x1000)
-#define BD_ENET_RX_LAST         ((ushort)0x0800)
-#define BD_ENET_RX_FIRST        ((ushort)0x0400)
-#define BD_ENET_RX_MISS         ((ushort)0x0100)
-#define BD_ENET_RX_LG           ((ushort)0x0020)
-#define BD_ENET_RX_NO           ((ushort)0x0010)
-#define BD_ENET_RX_SH           ((ushort)0x0008)
-#define BD_ENET_RX_CR           ((ushort)0x0004)
-#define BD_ENET_RX_OV           ((ushort)0x0002)
-#define BD_ENET_RX_CL           ((ushort)0x0001)
-#define BD_ENET_RX_STATS        ((ushort)0x013f)        /* All status bits */
+ */
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
 
 /* Enhanced buffer descriptor control/status used by Ethernet receive */
-#define BD_ENET_RX_VLAN         0x00000004
+#define BD_ENET_RX_VLAN		0x00000004
 
 /* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY        ((ushort)0x8000)
-#define BD_ENET_TX_PAD          ((ushort)0x4000)
-#define BD_ENET_TX_WRAP         ((ushort)0x2000)
-#define BD_ENET_TX_INTR         ((ushort)0x1000)
-#define BD_ENET_TX_LAST         ((ushort)0x0800)
-#define BD_ENET_TX_TC           ((ushort)0x0400)
-#define BD_ENET_TX_DEF          ((ushort)0x0200)
-#define BD_ENET_TX_HB           ((ushort)0x0100)
-#define BD_ENET_TX_LC           ((ushort)0x0080)
-#define BD_ENET_TX_RL           ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK       ((ushort)0x003c)
-#define BD_ENET_TX_UN           ((ushort)0x0002)
-#define BD_ENET_TX_CSL          ((ushort)0x0001)
-#define BD_ENET_TX_STATS        ((ushort)0x0fff)        /* All status bits */
-
-/*enhanced buffer descriptor control/status used by Ethernet transmit*/
-#define BD_ENET_TX_INT          0x40000000
-#define BD_ENET_TX_TS           0x20000000
-#define BD_ENET_TX_PINS         0x10000000
-#define BD_ENET_TX_IINS         0x08000000
+ */
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x0fff)	/* All status bits */
+
+/* enhanced buffer descriptor control/status used by Ethernet transmit */
+#define BD_ENET_TX_INT		0x40000000
+#define BD_ENET_TX_TS		0x20000000
+#define BD_ENET_TX_PINS		0x10000000
+#define BD_ENET_TX_IINS		0x08000000
 
 
 /* This device has up to three irqs on some platforms */
@@ -301,7 +301,7 @@ struct bufdesc_ex {
 #define IDLE_SLOPE_2		0x200 /* BW fraction: 0.5 */
 #define IDLE_SLOPE(X)		((X == 1) ? (IDLE_SLOPE_1 & IDLE_SLOPE_MASK) : \
 				(IDLE_SLOPE_2 & IDLE_SLOPE_MASK))
-#define RCMR_MATCHEN            (0x1 << 16)
+#define RCMR_MATCHEN		(0x1 << 16)
 #define RCMR_CMP_CFG(v, n)	((v & 0x7) <<  (n << 2))
 #define RCMR_CMP_1		(RCMR_CMP_CFG(0, 0) | RCMR_CMP_CFG(1, 1) | \
 				RCMR_CMP_CFG(2, 2) | RCMR_CMP_CFG(3, 3))
@@ -326,8 +326,8 @@ struct bufdesc_ex {
 #define TX_RING_SIZE		512	/* Must be power of two */
 #define TX_RING_MOD_MASK	511	/*   for this to work */
 
-#define BD_ENET_RX_INT          0x00800000
-#define BD_ENET_RX_PTP          ((ushort)0x0400)
+#define BD_ENET_RX_INT		0x00800000
+#define BD_ENET_RX_PTP		((ushort)0x0400)
 #define BD_ENET_RX_ICE		0x00000020
 #define BD_ENET_RX_PCR		0x00000010
 #define FLAG_RX_CSUM_ENABLED	(BD_ENET_RX_ICE | BD_ENET_RX_PCR)
@@ -364,8 +364,8 @@ struct bufdesc_ex {
 #define FEC_ITR_ICFT_DEFAULT	200  /* Set 200 frame count threshold */
 #define FEC_ITR_ICTT_DEFAULT	1000 /* Set 1000us timer threshold */
 
-#define FEC_VLAN_TAG_LEN       0x04
-#define FEC_ETHTYPE_LEN                0x02
+#define FEC_VLAN_TAG_LEN	0x04
+#define FEC_ETHTYPE_LEN		0x02
 
 /* Controller is ENET-MAC */
 #define FEC_QUIRK_ENET_MAC		(1 << 0)
@@ -390,7 +390,7 @@ struct bufdesc_ex {
  * frames not being transmitted until there is a 0-to-1 transition on
  * ENET_TDAR[TDAR].
  */
-#define FEC_QUIRK_ERR006358            (1 << 7)
+#define FEC_QUIRK_ERR006358		(1 << 7)
 /* ENET IP hw AVB
  *
  * i.MX6SX ENET IP add Audio Video Bridging (AVB) feature support.
-- 
1.7.10.4


  reply	other threads:[~2014-10-28 13:23 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-28 11:01 [PATCHv2 0/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support Lothar Waßmann
2014-10-28 11:01 ` [PATCHv2 1/6] net: fec: indentation cleanup; no functional change Lothar Waßmann
2014-10-28 11:01 ` [PATCHv2 2/6] net: fec: declare bufdesc_ex flag as bool Lothar Waßmann
2014-10-28 11:01 ` [PATCHv2 3/6] net: fec: improve access to quirk flags by copying them into fec_enet_private struct Lothar Waßmann
2014-10-28 11:01 ` [PATCHv2 4/6] net: fec: use swab32s() instead of cpu_to_be32() Lothar Waßmann
2014-10-28 11:01 ` [PATCHv2 5/6] net: fec: simplify loop counter handling in swap_buffer() Lothar Waßmann
2014-10-28 11:01 ` [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support Lothar Waßmann
2014-10-28 11:12   ` David Laight
2014-10-28 12:36     ` Lothar Waßmann
2014-10-28 13:01       ` David Laight
2014-10-28 13:30         ` Lothar Waßmann
2014-10-28 11:14   ` David Laight
2014-10-28 12:10     ` Lothar Waßmann
2014-10-28 13:22 ` Lothar Waßmann
2014-10-28 13:22   ` Lothar Waßmann [this message]
2014-10-28 13:22   ` [PATCHv3 2/9] net: fec: consistently use lower case chars as hex digits Lothar Waßmann
2014-10-28 13:22   ` [PATCHv3 3/9] net: fec: properly parenthesize macro args Lothar Waßmann
2014-10-28 13:22   ` [PATCHv3 4/9] net: fec: declare bufdesc_ex flag as bool Lothar Waßmann
2014-10-28 13:23   ` [PATCHv3 5/9] net: fec: improve access to quirk flags by copying them into fec_enet_private struct Lothar Waßmann
2014-10-28 13:23   ` [PATCHv3 6/9] net: fec: use swab32s() instead of cpu_to_be32() Lothar Waßmann
2014-10-28 13:23   ` [PATCHv3 7/9] net: fec: simplify loop counter handling in swap_buffer() Lothar Waßmann
2014-10-28 13:23   ` [PATCHv3 8/9] net: fec: remove unused return value from swap_buffer() Lothar Waßmann
2014-10-28 13:23   ` [PATCHv3 9/9] net: fec: fix regression on i.MX28 introduced by rx_copybreak support Lothar Waßmann
2014-11-03 22:58     ` Stefan Wahren
2014-10-29 19:34   ` David Miller
2014-10-30  6:51     ` Lothar Waßmann
2014-10-30 16:17       ` David Miller
2014-10-31  5:32         ` Lothar Waßmann
2014-11-04 10:29           ` Lothar Waßmann
2014-11-04 16:28             ` David Miller
2014-11-05  5:21               ` Lothar Waßmann
2014-11-05 20:52                 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414502584-10583-2-git-send-email-LW@KARO-electronics.de \
    --to=lw@karo-electronics.de \
    --cc=Frank.Li@freescale.com \
    --cc=davem@davemloft.net \
    --cc=fabio.estevam@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®