Re: [PATCH] audio: sai: Add Power Management support

[Huan Wang <alison.wang@freescale.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 1472 bytes --]

Hi, Fabio,

Please always add the driver maintainers (Xiubo Li and Nicolin Chen).
[Alison Wang] ok, thanks for your reminder.

On Wed, Oct 29, 2014 at 1:21 AM, Alison Wang <b18965@freescale.com> wrote:

> +#ifdef CONFIG_PM_SLEEP
> +static int fsl_sai_suspend(struct device *dev)
> +{
> +       struct fsl_sai *sai = dev_get_drvdata(dev);
> +
> +       regcache_cache_only(sai->regmap, true);
> +       regcache_mark_dirty(sai->regmap);
> +
> +       return 0;
> +}
> +
> +static int fsl_sai_resume(struct device *dev)
> +{
> +       struct fsl_sai *sai = dev_get_drvdata(dev);
> +
> +       /* Restore all registers */
> +       regcache_cache_only(sai->regmap, false);
> +       regcache_sync(sai->regmap);
> +
> +       return 0;
> +};
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static const struct dev_pm_ops fsl_sai_pm = {
> +       SET_SYSTEM_SLEEP_PM_OPS(fsl_sai_suspend, fsl_sai_resume)

This could be simplified to:
static SIMPLE_DEV_PM_OPS(fsl_sai_pm, fsl_sai_suspend, fsl_sai_resume);
[Alison Wang] ok.

I am also curious as to how you tested it, as I noticed that
suspend/resume is broken on 3.18-rc for mx6sx.

Are you able to do suspend/resume on 3.18-rc on a mx6sx sdb board?
[Alison Wang] No, I don't have that board. I tested on LS1021A QDS board which supports deep sleep.

Best Regards,
Alison Wangÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥