From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1422897AbaJaDNV (ORCPT ); Thu, 30 Oct 2014 23:13:21 -0400 Received: from mail-by2on0114.outbound.protection.outlook.com ([207.46.100.114]:27251 "EHLO na01-by2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S933681AbaJaDNR (ORCPT ); Thu, 30 Oct 2014 23:13:17 -0400 X-WSS-ID: 0NEAGXT-08-GMX-02 X-M-MSG: From: Huang Rui To: Felipe Balbi , Alan Stern , "Bjorn Helgaas" , Greg Kroah-Hartman CC: Paul Zimmerman , Heikki Krogerus , Sergei Shtylyov , Jason Chang , Vincent Wan , Tony Li , , , , , Huang Rui Subject: [PATCH v5 7/8] usb: dwc3: make HIRD threshold configurable Date: Fri, 31 Oct 2014 11:11:18 +0800 Message-ID: <1414725079-11490-8-git-send-email-ray.huang@amd.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1414725079-11490-1-git-send-email-ray.huang@amd.com> References: <1414725079-11490-1-git-send-email-ray.huang@amd.com> MIME-Version: 1.0 Content-Type: text/plain X-EOPAttributedMessage: 0 X-Forefront-Antispam-Report: CIP:165.204.84.222;CTRY:US;IPV:NLI;EFV:NLI;SFV:NSPM;SFS:(10019020)(6009001)(428002)(199003)(189002)(48376002)(85306004)(50466002)(19580405001)(19580395003)(89996001)(44976005)(68736004)(85852003)(76176999)(50986999)(77096002)(97736003)(53416004)(120916001)(76482002)(99396003)(101416001)(21056001)(102836001)(62966002)(107046002)(229853001)(84676001)(87286001)(87936001)(88136002)(2171001)(106466001)(105586002)(4396001)(50226001)(95666004)(36756003)(20776003)(47776003)(64706001)(77156001)(92566001)(92726001)(33646002)(80022003)(46102003)(93916002)(104166001)(575784001)(86362001)(31966008);DIR:OUT;SFP:1102;SCL:1;SRVR:BLUPR02MB195;H:atltwp02.amd.com;FPR:;MLV:sfv;PTR:InfoDomainNonexistent;A:1;MX:1;LANG:en; X-Microsoft-Antispam: UriScan:; X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;SRVR:BLUPR02MB195; X-Exchange-Antispam-Report-Test: UriScan:; X-Forefront-PRVS: 03818C953D Authentication-Results: spf=none (sender IP is 165.204.84.222) smtp.mailfrom=Ray.Huang@amd.com; X-OriginatorOrg: amd4.onmicrosoft.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org HIRD threshold should be configurable by different platforms. >>From DesignWare databook: When HIRD_Threshold[4] is set to 1b1 and HIRD value is greater than or equal to the value in HIRD_Threshold[3:0], dwc3 asserts output signals utmi_l1_suspend_n to put PHY into Deep Low-Power mode in L1. When HIRD_Threshold[4] is set to 1b0 or the HIRD value is less than HIRD_Threshold[3:0], dwc3 asserts output signals utmi_sleep_n on L1. Signed-off-by: Huang Rui --- Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ drivers/usb/dwc3/core.c | 17 +++++++++++++++++ drivers/usb/dwc3/core.h | 6 ++++++ drivers/usb/dwc3/gadget.c | 6 +----- drivers/usb/dwc3/platform_data.h | 3 +++ 5 files changed, 30 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index f200ecc..cd7f045 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -34,6 +34,9 @@ Optional properties: LTSSM during USB3 Compliance mode. - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy. - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy. + - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal + utmi_l1_suspend_n, false when asserts utmi_sleep_n + - snps,hird-threshold: HIRD threshold This is usually a subnode to DWC3 glue to which it is connected. diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 25f1446..8753792 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -725,6 +725,7 @@ static int dwc3_probe(struct platform_device *pdev) struct dwc3 *dwc; u8 lpm_nyet_threshold; u8 tx_de_emphasis; + u8 hird_threshold; int ret; @@ -786,12 +787,22 @@ static int dwc3_probe(struct platform_device *pdev) /* default to -3.5dB de-emphasis */ tx_de_emphasis = 1; + /* + * default to assert utmi_sleep_n and use maximum allowed HIRD + * threshold value of 0b1100 + */ + hird_threshold = 12; + if (node) { dwc->maximum_speed = of_usb_get_maximum_speed(node); dwc->has_lpm_erratum = of_property_read_bool(node, "snps,has-lpm-erratum"); of_property_read_u8(node, "snps,lpm-nyet-threshold", &lpm_nyet_threshold); + dwc->is_utmi_l1_suspend = of_property_read_bool(node, + "snps,is-utmi-l1-suspend"); + of_property_read_u8(node, "snps,hird-threshold", + &hird_threshold); dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); @@ -827,6 +838,9 @@ static int dwc3_probe(struct platform_device *pdev) dwc->has_lpm_erratum = pdata->has_lpm_erratum; if (pdata->lpm_nyet_threshold) lpm_nyet_threshold = pdata->lpm_nyet_threshold; + dwc->is_utmi_l1_suspend = pdata->is_utmi_l1_suspend; + if (pdata->hird_threshold) + hird_threshold = pdata->hird_threshold; dwc->needs_fifo_resize = pdata->tx_fifo_resize; dwc->dr_mode = pdata->dr_mode; @@ -854,6 +868,9 @@ static int dwc3_probe(struct platform_device *pdev) dwc->lpm_nyet_threshold = lpm_nyet_threshold; dwc->tx_de_emphasis = tx_de_emphasis; + dwc->hird_threshold = hird_threshold + | (dwc->is_utmi_l1_suspend << 4); + ret = dwc3_core_get_phy(dwc); if (ret) return ret; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index cf86d30..4bb9aa6 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -675,12 +675,16 @@ struct dwc3_scratchpad_array { * @test_mode: true when we're entering a USB test mode * @test_mode_nr: test feature selector * @lpm_nyet_threshold: LPM NYET response threshold + * @hird_threshold: HIRD threshold * @delayed_status: true when gadget driver asks for delayed status * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer * @has_hibernation: true when dwc3 was configured with Hibernation * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that * there's now way for software to detect this in runtime. + * @is_utmi_l1_suspend: the core asserts output signal + * 0 - utmi_sleep_n + * 1 - utmi_l1_suspend_n * @is_selfpowered: true when we are selfpowered * @is_fpga: true when we are using the FPGA board * @needs_fifo_resize: not all users might want fifo resizing, flag it @@ -797,12 +801,14 @@ struct dwc3 { u8 test_mode; u8 test_mode_nr; u8 lpm_nyet_threshold; + u8 hird_threshold; unsigned delayed_status:1; unsigned ep0_bounced:1; unsigned ep0_expect_in:1; unsigned has_hibernation:1; unsigned has_lpm_erratum:1; + unsigned is_utmi_l1_suspend:1; unsigned is_selfpowered:1; unsigned is_fpga:1; unsigned needs_fifo_resize:1; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index ff6db0d..01e22d7 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2295,11 +2295,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); - /* - * TODO: This should be configurable. For now using - * maximum allowed HIRD threshold value of 0b1100 - */ - reg |= DWC3_DCTL_HIRD_THRES(12); + reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold); /* * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h index 245300b..a3a3b6d 100644 --- a/drivers/usb/dwc3/platform_data.h +++ b/drivers/usb/dwc3/platform_data.h @@ -25,6 +25,9 @@ struct dwc3_platform_data { enum usb_dr_mode dr_mode; bool tx_fifo_resize; + unsigned is_utmi_l1_suspend:1; + u8 hird_threshold; + u8 lpm_nyet_threshold; unsigned disable_scramble_quirk:1; -- 1.9.1