From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759483AbaJaQFH (ORCPT ); Fri, 31 Oct 2014 12:05:07 -0400 Received: from fw-tnat.cambridge.arm.com ([217.140.96.21]:52110 "EHLO cam-smtp0.cambridge.arm.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1757131AbaJaQFD (ORCPT ); Fri, 31 Oct 2014 12:05:03 -0400 From: Liviu Dudau To: Catalin Marinas , Mark Rutland , Pawel Moll , Will Deacon , device tree , LAKML , LKML , Rob Herring , Ian Campbell , Kumar Gala Subject: [PATCH 0/3] arm64: Add support for Juno development board Date: Fri, 31 Oct 2014 16:04:17 +0000 Message-Id: <1414771460-7340-1-git-send-email-Liviu.Dudau@arm.com> X-Mailer: git-send-email 2.1.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patchset adds device tree support for ARM's AArch64 Juno development board. It enables use of various peripherals on the board, from USB and networking to I2C and PL011 UART. The device tree file might end up not being merged in the kernel if Mark Rutland's plans to create a separate repositories for .dts files pan out, but I would like the first two patches to be added to arch/arm64. Best regards, Liviu Liviu Dudau (3): arm64: defconfig: Enable support for generic EHCI and OHCI platforms arm64: Create link to include/dt-bindings to enable C preprocessor use. arm64: Add Juno SoC device tree. arch/arm64/boot/dts/Makefile | 2 +- arch/arm64/boot/dts/include/dt-bindings | 1 + arch/arm64/boot/dts/juno.dts | 374 ++++++++++++++++++++++++++++++++ arch/arm64/configs/defconfig | 5 + 4 files changed, 381 insertions(+), 1 deletion(-) create mode 120000 arch/arm64/boot/dts/include/dt-bindings create mode 100644 arch/arm64/boot/dts/juno.dts -- 2.1.2