From: Jianqun <jay.xu@rock-chips.com>
To: heiko@sntech.de, lgirdwood@gmail.com, broonie@kernel.org,
perex@perex.cz, tiwai@suse.de, Li.Xiubo@freescale.com,
moinejf@free.fr, kuninori.morimoto.gx@renesas.com, jsarha@ti.com,
Guangyu.Chen@freescale.com, dgreid@chromium.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org
Cc: huangtao@rock-chips.com, cf@rock-chips.com,
Jianqun <jay.xu@rock-chips.com>
Subject: [PATCH] ASoC: simple-card: add "invert" property for detect GPIOs
Date: Sat, 1 Nov 2014 11:22:18 +0800 [thread overview]
Message-ID: <1414812138-6178-1-git-send-email-jay.xu@rock-chips.com> (raw)
Since hardware may invert detect GPIO of headphone or mic, add one
property to support software invert.
Signed-off-by: Jianqun <jay.xu@rock-chips.com>
---
sound/soc/generic/simple-card.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index d1b7293..f1bb537 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -29,7 +29,9 @@ struct simple_card_data {
} *dai_props;
unsigned int mclk_fs;
int gpio_hp_det;
+ int gpio_hp_det_invert;
int gpio_mic_det;
+ int gpio_mic_det_invert;
struct snd_soc_dai_link dai_link[]; /* dynamically allocated */
};
@@ -148,6 +150,7 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd)
simple_card_hp_jack_pins);
simple_card_hp_jack_gpio.gpio = priv->gpio_hp_det;
+ simple_card_hp_jack_gpio.invert = priv->gpio_hp_det_invert;
snd_soc_jack_add_gpios(&simple_card_hp_jack, 1,
&simple_card_hp_jack_gpio);
}
@@ -159,6 +162,7 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd)
ARRAY_SIZE(simple_card_mic_jack_pins),
simple_card_mic_jack_pins);
simple_card_mic_jack_gpio.gpio = priv->gpio_mic_det;
+ simple_card_mic_jack_gpio.invert = priv->gpio_mic_det_invert;
snd_soc_jack_add_gpios(&simple_card_mic_jack, 1,
&simple_card_mic_jack_gpio);
}
@@ -381,6 +385,7 @@ static int asoc_simple_card_parse_of(struct device_node *node,
struct simple_card_data *priv)
{
struct device *dev = simple_priv_to_dev(priv);
+ enum of_gpio_flags flags;
u32 val;
int ret;
@@ -436,13 +441,15 @@ static int asoc_simple_card_parse_of(struct device_node *node,
return ret;
}
- priv->gpio_hp_det = of_get_named_gpio(node,
- "simple-audio-card,hp-det-gpio", 0);
+ priv->gpio_hp_det = of_get_named_gpio_flags(node,
+ "simple-audio-card,hp-det-gpio", 0, &flags);
+ priv->gpio_hp_det_invert = !!(flags & OF_GPIO_ACTIVE_LOW);
if (priv->gpio_hp_det == -EPROBE_DEFER)
return -EPROBE_DEFER;
- priv->gpio_mic_det = of_get_named_gpio(node,
- "simple-audio-card,mic-det-gpio", 0);
+ priv->gpio_mic_det = of_get_named_gpio_flags(node,
+ "simple-audio-card,mic-det-gpio", 0, &flags);
+ priv->gpio_mic_det_invert = !!(flags & OF_GPIO_ACTIVE_LOW);
if (priv->gpio_mic_det == -EPROBE_DEFER)
return -EPROBE_DEFER;
--
1.9.1
next reply other threads:[~2014-11-01 3:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-01 3:22 Jianqun [this message]
2014-11-03 12:26 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414812138-6178-1-git-send-email-jay.xu@rock-chips.com \
--to=jay.xu@rock-chips.com \
--cc=Guangyu.Chen@freescale.com \
--cc=Li.Xiubo@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cf@rock-chips.com \
--cc=dgreid@chromium.org \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=jsarha@ti.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=moinejf@free.fr \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®