[PATCH] phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly

[Kishon Vijay Abraham I <kishon@ti.com>]

From: Oussama Ghorbel <ghorbel@pivasoftware.com>

The USB OTG port does not work since v3.16 on omap platform.
This is a regression introduced by the commit
eb82a3d846fa (phy: omap-usb2: Balance pm_runtime_enable() on probe failure
 and remove).
This because the call to pm_runtime_enable() function is moved after the
call to devm_phy_create() function, which has side effect since later in
the subsequent calls of devm_phy_create() there is a check with
pm_runtime_enabled() to configure few things.

Signed-off-by: Oussama Ghorbel <ghorbel@pivasoftware.com>
Tested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-omap-usb2.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 8c84298..f091576 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -258,14 +258,16 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	otg->phy		= &phy->phy;
 
 	platform_set_drvdata(pdev, phy);
+	pm_runtime_enable(phy->dev);
 
 	generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL);
-	if (IS_ERR(generic_phy))
+	if (IS_ERR(generic_phy)) {
+		pm_runtime_disable(phy->dev);
 		return PTR_ERR(generic_phy);
+	}
 
 	phy_set_drvdata(generic_phy, phy);
 
-	pm_runtime_enable(phy->dev);
 	phy_provider = devm_of_phy_provider_register(phy->dev,
 			of_phy_simple_xlate);
 	if (IS_ERR(phy_provider)) {
-- 
1.7.9.5