From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754213AbaKEJsP (ORCPT ); Wed, 5 Nov 2014 04:48:15 -0500 Received: from mailout1.w1.samsung.com ([210.118.77.11]:25736 "EHLO mailout1.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751604AbaKEJsJ (ORCPT ); Wed, 5 Nov 2014 04:48:09 -0500 X-AuditID: cbfec7f4-b7f6c6d00000120b-c9-5459f257715b From: Krzysztof Kozlowski To: Samuel Ortiz , Lee Jones , Liam Girdwood , Mark Brown , linux-kernel@vger.kernel.org Cc: Kyungmin Park , Marek Szyprowski , Bartlomiej Zolnierkiewicz , Javier Martinez Canillas , Krzysztof Kozlowski Subject: [PATCH v2 0/3] regulator: max77686/802: Cleanup Date: Wed, 05 Nov 2014 10:47:48 +0100 Message-id: <1415180871-25293-1-git-send-email-k.kozlowski@samsung.com> X-Mailer: git-send-email 1.9.1 X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFvrMJMWRmVeSWpSXmKPExsVy+t/xa7rhnyJDDG7/FrPYOGM9q8XUh0/Y LI7+LrB4/cLQ4mzTG3aL+1+PMlp8u9LBZHF51xw2i7VH7rJbnO5mdeDy+Pv8OovHzll32T02 repk87hzbQ+bx7yTgR59W1YxenzeJBfAHsVlk5Kak1mWWqRvl8CV8erDC8aCvTwV/08uYG1g fMrZxcjJISFgIrFjwhs2CFtM4sK99UA2F4eQwFJGiTVTtjBBOH1MEtN797ODVLEJGEtsXr4E rEpEYBOjxKT+K6wgCWaBZiaJ0+9zuhg5OIQFLCTuX4oACbMIqEr82v+CBcTmFXCXOLBjNgvE NjmJk8cms05g5F7AyLCKUTS1NLmgOCk911CvODG3uDQvXS85P3cTIySgvuxgXHzM6hCjAAej Eg+vR1NkiBBrYllxZe4hRgkOZiURXs5LQCHelMTKqtSi/Pii0pzU4kOMTBycUg2M8hMyJpit uDx7XZzg3R6lo6uqza5Mumi3ME3n9p+PMqf1I1L5P0mZ+sesevNKvb8u7WhHToRGscTpC2sl Oq6t1v1a/VnpRcQmyXQtzmtv1ntWn+uuPcN4O37TRuM3aYlW9YHTLabuP/Fl8o3TRz/cjb+4 aJvj9SnFD9dVhu2fNSnx7RSZt1t0ziqxFGckGmoxFxUnAgAxmFGQBgIAAA== Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, Changes since v1 ================ 1. Rebase on next-20141105, now it should apply cleanly to regulator tree. 2. Remove first 3 patches, applied by Mark. Description =========== Previously this patchset was part of adding GPIO to max77686 regulator driver [1]. I split it but the goal is the same: cleanup and simplify the regulator drivers by removing obsolete board file support so adding new features would be easier. The patchset removes board file support from regulator drivers incrementally and in a bisect-friendly way. Thus MFD driver is updated at the end. Everything should be pulled at once (preferrably regulator tree). Rebased on next-20141105. The changes on max77802 were not tested. I am kindly asking for testing it because I don't have the board with Maxim 77802. [1] [PATCH v3 00/14] regulator: max77686: Add GPIO control https://lkml.org/lkml/2014/10/30/270 Best regards, Krzysztof Kozlowski Krzysztof Kozlowski (3): regulator: max77802: Remove support for board files regulator: max77686: Remove support for board files mfd: max77686/802: Remove support for board files drivers/mfd/Kconfig | 1 + drivers/mfd/max77686.c | 23 --------- drivers/regulator/max77686.c | 91 ++++++++--------------------------- drivers/regulator/max77802.c | 92 ++++++++---------------------------- include/linux/mfd/max77686-private.h | 1 - include/linux/mfd/max77686.h | 28 ----------- 6 files changed, 39 insertions(+), 197 deletions(-) -- 1.9.1