From: Beomho Seo <beomho.seo@samsung.com>
To: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org
Cc: cw00.choi@samsung.com, geunsik.lim@samsung.com,
inki.dae@samsung.com, sw0312.kim@samsung.com,
Beomho Seo <beomho.seo@samsung.com>
Subject: [PATCH v2 0/5] mfd: rt5033: Add Richtek RT5033 drivers
Date: Mon, 10 Nov 2014 16:19:42 +0900 [thread overview]
Message-ID: <1415603987-32475-1-git-send-email-beomho.seo@samsung.com> (raw)
This patchset adds driver for Richtek rt5033 chip The chip contains
switching charge mode Li-Ion/Li-Polymer battery charger, fuelgauge, regulators.
This patchset provides common support for accessing the device.
This patchset have been tested base on exynos board.
Changes in v2:
- Remove volatile_reg callback. Because this driver not in use regmap cache.
- Remove unnecessary subnode of_compatible.
- Add definde for set high impedance mode of charger.
- Remove unnecessary device specific code.
- Fix wrong register name.
- Fix wrong error message.
- Fix return vallue at error case.
- Revise binding documentation.
Beomho Seo (5):
mfd: rt5033: Add Richtek RT5033 driver core.
regulator: rt5033: Add RT5033 Regulator device driver
power: rt5033_battery: Add RT5033 Fuel gauge device driver
power: rt5033_charger: Add RT5033 charger device driver
Documentation: Add documentation for rt5033 multifunction device
Documentation/devicetree/bindings/mfd/rt5033.txt | 108 +++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rt5033.c | 156 +++++++
drivers/power/Kconfig | 16 +
drivers/power/Makefile | 2 +
drivers/power/rt5033_battery.c | 177 +++++++
drivers/power/rt5033_charger.c | 485 ++++++++++++++++++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rt5033-regulator.c | 123 +++++
include/linux/mfd/rt5033-private.h | 260 +++++++++++
include/linux/mfd/rt5033.h | 64 +++
14 files changed, 1413 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt
create mode 100644 drivers/mfd/rt5033.c
create mode 100644 drivers/power/rt5033_battery.c
create mode 100644 drivers/power/rt5033_charger.c
create mode 100644 drivers/regulator/rt5033-regulator.c
create mode 100644 include/linux/mfd/rt5033-private.h
create mode 100644 include/linux/mfd/rt5033.h
--
1.7.9.5
next reply other threads:[~2014-11-10 7:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-10 7:19 Beomho Seo [this message]
2014-11-10 7:19 ` [PATCH v2 1/5] mfd: rt5033: Add Richtek RT5033 driver core Beomho Seo
2014-11-10 12:39 ` Lee Jones
2014-11-10 12:49 ` Beomho Seo
2014-11-10 7:19 ` [PATCH v2 2/5] regulator: rt5033: Add RT5033 Regulator device driver Beomho Seo
2014-11-10 19:04 ` Mark Brown
2014-11-12 1:25 ` Beomho Seo
2014-11-10 7:19 ` [PATCH v2 3/5] power: rt5033_battery: Add RT5033 Fuel gauge " Beomho Seo
2014-11-10 7:19 ` [PATCH v2 4/5] power: rt5033_charger: Add RT5033 charger " Beomho Seo
2014-11-10 7:19 ` [PATCH v2 5/5] Documentation: Add documentation for rt5033 multifunction device Beomho Seo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415603987-32475-1-git-send-email-beomho.seo@samsung.com \
--to=beomho.seo@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=geunsik.lim@samsung.com \
--cc=inki.dae@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sw0312.kim@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®