From: Avi Shchislowski <avi.shchislowski@sandisk.com>
To: <ulf.hansson@linaro.org>
Cc: <avi.shchislowski@sandisk.com>, <cjb@laptop.org>,
<linux-mmc@vger.kernel.org>, <Alex.Lemberg@sandisk.com>,
<gwendal@google.com>, Alex Lemberg <alex.lemberg@sandisk.com>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/3] mmc: Support FFU for eMMC v5.0
Date: Mon, 10 Nov 2014 19:18:57 +0200 [thread overview]
Message-ID: <1415639943-12068-1-git-send-email-avi.shchislowski@sandisk.com> (raw)
In-Reply-To: <n>
eMMC5.0 FFU is using some of pre-existing mmc_test.c functionality.
In order to prevent code duplication, some code of mmc_test.c was moved to core.c and modified.
Signed-off-by: Avi Shchislowski <avi.shchislowski@sandisk.com>
Signed-off-by: Alex Lemberg <alex.lemberg@sandisk.com>
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 0c0fc52..e6ee0a8 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -13,6 +13,7 @@
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
+#include <linux/mmc/core.h>
#include <linux/slab.h>
#include <linux/scatterlist.h>
@@ -189,43 +190,8 @@ static void mmc_test_prepare_mrq(struct mmc_test_card *test,
struct mmc_request *mrq, struct scatterlist *sg, unsigned sg_len,
unsigned dev_addr, unsigned blocks, unsigned blksz, int write)
{
- BUG_ON(!mrq || !mrq->cmd || !mrq->data || !mrq->stop);
-
- if (blocks > 1) {
- mrq->cmd->opcode = write ?
- MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK;
- } else {
- mrq->cmd->opcode = write ?
- MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
- }
-
- mrq->cmd->arg = dev_addr;
- if (!mmc_card_blockaddr(test->card))
- mrq->cmd->arg <<= 9;
-
- mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- if (blocks == 1)
- mrq->stop = NULL;
- else {
- mrq->stop->opcode = MMC_STOP_TRANSMISSION;
- mrq->stop->arg = 0;
- mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
- }
-
- mrq->data->blksz = blksz;
- mrq->data->blocks = blocks;
- mrq->data->flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
- mrq->data->sg = sg;
- mrq->data->sg_len = sg_len;
-
- mmc_set_data_timeout(mrq->data, test->card);
-}
-
-static int mmc_test_busy(struct mmc_command *cmd)
-{
- return !(cmd->resp[0] & R1_READY_FOR_DATA) ||
- (R1_CURRENT_STATE(cmd->resp[0]) == R1_STATE_PRG);
+ mmc_prepare_mrq(test->card, mrq, sg, sg_len,
+ dev_addr, blocks, blksz, write);
}
/*
@@ -233,30 +199,9 @@ static int mmc_test_busy(struct mmc_command *cmd)
*/
static int mmc_test_wait_busy(struct mmc_test_card *test)
{
- int ret, busy;
- struct mmc_command cmd = {0};
-
- busy = 0;
- do {
- memset(&cmd, 0, sizeof(struct mmc_command));
-
- cmd.opcode = MMC_SEND_STATUS;
- cmd.arg = test->card->rca << 16;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
-
- ret = mmc_wait_for_cmd(test->card->host, &cmd, 0);
- if (ret)
- break;
-
- if (!busy && mmc_test_busy(&cmd)) {
- busy = 1;
- if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
- pr_info("%s: Warning: Host did not "
- "wait for busy state to end.\n",
- mmc_hostname(test->card->host));
- }
- } while (mmc_test_busy(&cmd));
+ int ret;
+ ret = mmc_wait_busy(test->card);
return ret;
}
@@ -693,19 +638,9 @@ static int mmc_test_check_result(struct mmc_test_card *test,
{
int ret;
- BUG_ON(!mrq || !mrq->cmd || !mrq->data);
-
ret = 0;
- if (!ret && mrq->cmd->error)
- ret = mrq->cmd->error;
- if (!ret && mrq->data->error)
- ret = mrq->data->error;
- if (!ret && mrq->stop && mrq->stop->error)
- ret = mrq->stop->error;
- if (!ret && mrq->data->bytes_xfered !=
- mrq->data->blocks * mrq->data->blksz)
- ret = RESULT_FAIL;
+ ret = mmc_check_result(mrq);
if (ret == -EINVAL)
ret = RESULT_UNSUP_HOST;
@@ -844,23 +779,13 @@ static int mmc_test_simple_transfer(struct mmc_test_card *test,
struct scatterlist *sg, unsigned sg_len, unsigned dev_addr,
unsigned blocks, unsigned blksz, int write)
{
- struct mmc_request mrq = {0};
- struct mmc_command cmd = {0};
- struct mmc_command stop = {0};
- struct mmc_data data = {0};
-
- mrq.cmd = &cmd;
- mrq.data = &data;
- mrq.stop = &stop;
+ int ret;
- mmc_test_prepare_mrq(test, &mrq, sg, sg_len, dev_addr,
+ ret = mmc_simple_transfer(test->card, sg, sg_len, dev_addr,
blocks, blksz, write);
-
- mmc_wait_for_req(test->card->host, &mrq);
-
- mmc_test_wait_busy(test);
-
- return mmc_test_check_result(test, &mrq);
+ if (ret == -EINVAL)
+ ret = RESULT_UNSUP_HOST;
+ return ret;
}
/*
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index d03a080..132da0c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2658,6 +2658,134 @@ int mmc_pm_notify(struct notifier_block *notify_block,
return 0;
}
#endif
+/*
+ * Fill in the mmc_request structure given a set of transfer parameters.
+ */
+void mmc_prepare_mrq(struct mmc_card *card,
+ struct mmc_request *mrq, struct scatterlist *sg, unsigned sg_len,
+ unsigned dev_addr, unsigned blocks, unsigned blksz, int write)
+{
+ BUG_ON(!mrq || !mrq->cmd || !mrq->data || !mrq->stop);
+
+ if (blocks > 1) {
+ mrq->cmd->opcode = write ?
+ MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK;
+ } else {
+ mrq->cmd->opcode = write ?
+ MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
+ }
+
+ mrq->cmd->arg = dev_addr;
+ if (!mmc_card_blockaddr(card))
+ mrq->cmd->arg <<= 9;
+
+ mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ if (blocks == 1)
+ mrq->stop = NULL;
+ else {
+ mrq->stop->opcode = MMC_STOP_TRANSMISSION;
+ mrq->stop->arg = 0;
+ mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
+ }
+
+ mrq->data->blksz = blksz;
+ mrq->data->blocks = blocks;
+ mrq->data->flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+ mrq->data->sg = sg;
+ mrq->data->sg_len = sg_len;
+
+ mmc_set_data_timeout(mrq->data, card);
+}
+EXPORT_SYMBOL(mmc_prepare_mrq);
+
+static int mmc_busy(struct mmc_command *cmd)
+{
+ return !(cmd->resp[0] & R1_READY_FOR_DATA) ||
+ (R1_CURRENT_STATE(cmd->resp[0]) == R1_STATE_PRG);
+}
+
+/*
+ * Wait for the card to finish the busy state
+ */
+int mmc_wait_busy(struct mmc_card *card)
+{
+ int ret, busy = 0;
+ struct mmc_command cmd = {0};
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
+
+ do {
+ ret = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (ret)
+ break;
+
+ if (!busy && mmc_busy(&cmd)) {
+ busy = 1;
+ if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) {
+ pr_warn("%s: Warning: Host did not "
+ "wait for busy state to end.\n",
+ mmc_hostname(card->host));
+ }
+ }
+
+ } while (mmc_busy(&cmd));
+
+ return ret;
+}
+EXPORT_SYMBOL(mmc_wait_busy);
+
+int mmc_check_result(struct mmc_request *mrq)
+{
+ int ret;
+
+ BUG_ON(!mrq || !mrq->cmd || !mrq->data);
+
+ ret = 0;
+
+ if (!ret && mrq->cmd->error)
+ ret = mrq->cmd->error;
+ if (!ret && mrq->data->error)
+ ret = mrq->data->error;
+ if (!ret && mrq->stop && mrq->stop->error)
+ ret = mrq->stop->error;
+ if (!ret && mrq->data->bytes_xfered !=
+ mrq->data->blocks * mrq->data->blksz)
+ ret = -EPERM;
+
+ return ret;
+}
+EXPORT_SYMBOL(mmc_check_result);
+
+/*
++ * transfer with certain parameters
+ */
+int mmc_simple_transfer(struct mmc_card *card,
+ struct scatterlist *sg, unsigned sg_len, unsigned dev_addr,
+ unsigned blocks, unsigned blksz, int write)
+{
+ struct mmc_request mrq = {0};
+ struct mmc_command cmd = {0};
+ struct mmc_command stop = {0};
+ struct mmc_data data = {0};
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+ mrq.stop = &stop;
+
+ mmc_prepare_mrq(card, &mrq, sg, sg_len, dev_addr,
+ blocks, blksz, write);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ mmc_wait_busy(card);
+
+ return mmc_check_result(&mrq);
+}
+EXPORT_SYMBOL(mmc_simple_transfer);
/**
* mmc_init_context_info() - init synchronization context
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index f206e29..92540d0 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -196,6 +196,14 @@ extern void mmc_put_card(struct mmc_card *card);
extern int mmc_flush_cache(struct mmc_card *);
extern int mmc_detect_card_removed(struct mmc_host *host);
+extern void mmc_prepare_mrq(struct mmc_card *card,
+ struct mmc_request *mrq, struct scatterlist *sg, unsigned sg_len,
+ unsigned dev_addr, unsigned blocks, unsigned blksz, int write);
+extern int mmc_wait_busy(struct mmc_card *card);
+extern int mmc_check_result(struct mmc_request *mrq);
+extern int mmc_simple_transfer(struct mmc_card *card,
+ struct scatterlist *sg, unsigned sg_len, unsigned dev_addr,
+ unsigned blocks, unsigned blksz, int write);
/**
* mmc_claim_host - exclusively claim a host
--
1.7.9.5
next prev reply other threads:[~2014-11-10 17:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <n@samsung.com>
2012-08-05 13:08 ` [RFC/PATCH] mmc: core: Add support for idle time BKOPs Maya Erez
2012-08-30 7:36 ` Jaehoon Chung
2012-09-04 5:42 ` merez
2012-10-04 22:28 ` [PATCH v2] mmc: core: Add support for idle time BKOPS Maya Erez
2012-10-09 3:52 ` merez
2012-10-16 7:53 ` Jaehoon Chung
2012-11-07 4:28 ` merez
2012-11-08 5:26 ` Jaehoon Chung
2012-11-11 9:25 ` Subhash Jadavani
2012-10-18 16:31 ` [PATCH 1/6] mmc: core: sdio_io.c: Fixed lines with > 80 chars Sangho Yi
2012-10-18 16:31 ` [PATCH 2/6] mmc: core: sdio_bus.c: Removed trailing whitespace error Sangho Yi
2012-10-18 16:31 ` [PATCH 3/6] mmc: core: sdio_bus.c: Fixed lines > 80 chars Sangho Yi
2012-10-18 23:54 ` Jaehoon Chung
2012-10-18 16:31 ` [PATCH 4/6] mmc: core: sdio_bus.c: Removed space between func name and () Sangho Yi
2012-10-18 16:31 ` [PATCH 5/6] mmc: core: sdio_bus.c: Fixed a warning for the pr_warning( Sangho Yi
2012-10-18 16:31 ` [PATCH 6/6] mmc: core: sdio_bus.c: Removed unnecessary NULL check routine Sangho Yi
2012-10-18 16:47 ` [PATCH 1/6] mmc: core: sdio_io.c: Fixed lines with > 80 chars Joe Perches
2012-11-25 11:56 ` [PATCH v3] mmc: core: Add support for idle time BKOPS Maya Erez
2012-11-25 12:46 ` merez
2012-11-28 14:22 ` Chris Ball
2012-11-29 12:40 ` Jaehoon Chung
2012-12-03 9:49 ` merez
2012-12-04 9:52 ` Ulf Hansson
2012-12-04 21:17 ` merez
2012-12-06 10:18 ` Ulf Hansson
2012-12-12 12:32 ` merez
2012-12-13 10:17 ` Ulf Hansson
2012-12-21 8:35 ` Maya Erez
2012-12-21 9:56 ` Ulf Hansson
2012-12-21 10:24 ` Jaehoon Chung
2014-11-10 17:13 ` [PATCH 1/3] mmc: Support FFU for eMMC v5.0 Avi Shchislowski
2014-11-11 3:07 ` Jaehoon Chung
2014-11-11 8:44 ` Avi Shchislowski
2014-11-10 17:18 ` Avi Shchislowski [this message]
2014-11-11 3:30 ` [PATCH 2/3] " Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415639943-12068-1-git-send-email-avi.shchislowski@sandisk.com \
--to=avi.shchislowski@sandisk.com \
--cc=Alex.Lemberg@sandisk.com \
--cc=cjb@laptop.org \
--cc=gwendal@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®