From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Mark Brown <broonie@kernel.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Olof Johansson <olof@lixom.net>, Chris Zhong <zyw@rock-chips.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH 2/3] regulator: max77802: Fill regulator modes translation callback
Date: Tue, 11 Nov 2014 13:04:44 +0100 [thread overview]
Message-ID: <1415707485-28563-3-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1415707485-28563-1-git-send-email-javier.martinez@collabora.co.uk>
The max77802 PMIC regulators output can be configured in one of two
modes: Output ON (normal) and Output ON in Low Power Mode. Some of
the regulators support their operating mode to be changed on startup
or by consumers when the system is running while others only support
their operating mode to be changed while the system has entered in a
suspend state.
Use the max77802_map_mode() function to translate the device specific
modes to the standard operating modes as used by the regulator core.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
drivers/regulator/max77802.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index 9b4d127..0766615 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -378,6 +378,7 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+ .of_map_mode = max77802_map_mode, \
}
/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */
@@ -398,6 +399,7 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKs 1, 6 */
@@ -418,6 +420,7 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_DVS_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKS 2-4 */
@@ -439,6 +442,7 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \
.enable_mask = MAX77802_OPMODE_MASK << \
MAX77802_OPMODE_BUCK234_SHIFT, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCK 5 */
@@ -459,6 +463,7 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK5CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKs 7-10 */
@@ -479,6 +484,7 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
static const struct regulator_desc regulators[] = {
--
2.1.0
next prev parent reply other threads:[~2014-11-11 12:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-11 12:04 [PATCH 0/3] regulator: max77802: Configure suspend modes Javier Martinez Canillas
2014-11-11 12:04 ` [PATCH 1/3] regulator: max77802: Document binding for regulator operating modes Javier Martinez Canillas
2014-11-26 19:43 ` Mark Brown
2014-11-11 12:04 ` Javier Martinez Canillas [this message]
2014-11-26 19:43 ` [PATCH 2/3] regulator: max77802: Fill regulator modes translation callback Mark Brown
2014-11-11 12:04 ` [PATCH 3/3] ARM: dts: Configure regulators for suspend on exynos Peach boards Javier Martinez Canillas
2014-11-13 2:38 ` Kukjin Kim
2014-12-06 11:43 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415707485-28563-3-git-send-email-javier.martinez@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=k.kozlowski@samsung.com \
--cc=kesavan.abhilash@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®