From: Peter Griffin <peter.griffin@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, maxime.coquelin@st.com,
srinivas.kandagatla@gmail.com, patrice.chotard@st.com,
arnd@arndb.de
Cc: peter.griffin@linaro.org, lee.jones@linaro.org,
devicetree@vger.kernel.org
Subject: [PATCH v2 03/14] ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers.
Date: Thu, 13 Nov 2014 11:00:06 +0000 [thread overview]
Message-ID: <1415876417-28728-4-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1415876417-28728-1-git-send-email-peter.griffin@linaro.org>
This patch adds the DT nodes for the 4 usb ehci and ohci usb controllers
on the stih416 SoC.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
arch/arm/boot/dts/stih416.dtsi | 121 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 121 insertions(+)
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 321763b..76dc97e 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -324,5 +324,126 @@
clocks = <&clk_sysin>;
clock-names = "osc_phy";
};
+
+ ehci0: usb@fe1ffe00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe1ffe00 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB0_POWERDOWN>,
+ <&softreset STIH416_USB0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci0: usb@fe1ffc00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe1ffc00 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ status = "okay";
+ resets = <&powerdown STIH416_USB0_POWERDOWN>,
+ <&softreset STIH416_USB0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci1: usb@fe203e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe203e00 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB1_POWERDOWN>,
+ <&softreset STIH416_USB1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci1: usb@fe203c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe203c00 0x100>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB1_POWERDOWN>,
+ <&softreset STIH416_USB1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci2: usb@fe303e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe303e00 0x100>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB2_POWERDOWN>,
+ <&softreset STIH416_USB2_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci2: usb@fe303c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe303c00 0x100>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB2_POWERDOWN>,
+ <&softreset STIH416_USB2_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci3: usb@fe343e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe343e00 0x100>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB3_POWERDOWN>,
+ <&softreset STIH416_USB3_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci3: usb@fe343c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe343c00 0x100>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB3_POWERDOWN>,
+ <&softreset STIH416_USB3_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2014-11-13 11:00 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-13 11:00 [PATCH v2 00/14] Add stih410 SoC and USB2/1.1 support Peter Griffin
2014-11-13 11:00 ` [PATCH v2 01/14] ARM: STi: DT: STiH416: Add pinctl setup for usb controllers Peter Griffin
2014-11-13 11:00 ` [PATCH v2 02/14] ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy Peter Griffin
2014-11-13 11:00 ` Peter Griffin [this message]
2014-11-13 11:00 ` [PATCH v2 04/14] ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers Peter Griffin
2014-11-13 11:00 ` [PATCH v2 05/14] ARM: multi_v7_defconfig: Enable stih415/6 usb2 phy driver Peter Griffin
2014-11-13 11:00 ` [PATCH v2 06/14] ARM: multi_v7_defconfig: Enable stih407 usb picophy Peter Griffin
2014-11-13 11:00 ` [PATCH v2 07/14] ARM: STi: DT: STiH407: Add usb2 picophy dt nodes Peter Griffin
2014-11-13 11:00 ` [PATCH v2 08/14] ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks Peter Griffin
2014-11-13 11:00 ` [PATCH v2 09/14] ARM: STi: DT: STiH410: Add pinctl config for usb controllers Peter Griffin
2014-11-13 11:00 ` [PATCH v2 10/14] ARM: STi: DT: STih407: Abstract common dt nodes into shared files Peter Griffin
2014-11-13 11:00 ` [PATCH v2 11/14] ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support Peter Griffin
2014-11-13 11:00 ` [PATCH v2 12/14] ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs Peter Griffin
2014-11-13 11:00 ` [PATCH v2 13/14] ARM: STi: DT: STiH410: Add usb2 picophy dt nodes Peter Griffin
2014-11-13 11:15 ` Arnd Bergmann
2014-11-13 14:54 ` Peter Griffin
2014-11-13 17:41 ` Arnd Bergmann
2014-11-14 9:56 ` Peter Griffin
2014-11-14 11:03 ` Arnd Bergmann
2014-11-14 13:34 ` Peter Griffin
2014-11-14 14:59 ` Arnd Bergmann
2014-11-13 11:00 ` [PATCH v2 14/14] ARM: STi: DT: STiH410: Add DT nodes for the ehci and ohci usb controllers Peter Griffin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415876417-28728-4-git-send-email-peter.griffin@linaro.org \
--to=peter.griffin@linaro.org \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.coquelin@st.com \
--cc=patrice.chotard@st.com \
--cc=srinivas.kandagatla@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®