From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753233AbaK0G0b (ORCPT ); Thu, 27 Nov 2014 01:26:31 -0500 Received: from comal.ext.ti.com ([198.47.26.152]:57509 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752887AbaK0G03 (ORCPT ); Thu, 27 Nov 2014 01:26:29 -0500 From: Kishon Vijay Abraham I To: CC: , Subject: [PATCH 06/25] phy: miphy28lp: Tune tx impedance across Soc cuts Date: Thu, 27 Nov 2014 11:55:58 +0530 Message-ID: <1417069577-1169-7-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1417069577-1169-1-git-send-email-kishon@ti.com> References: <1417069577-1169-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Gabriel FERNANDEZ This patch to compensate tx impedance (Sata, PCIe) depending on Soc cuts the kernel is built for. Signed-off-by: Giuseppe Condorelli Signed-off-by: Gabriel Fernandez Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/phy-miphy28lp.txt | 1 + drivers/phy/phy-miphy28lp.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt index 4a3b4af..46a135d 100644 --- a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt +++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt @@ -40,6 +40,7 @@ Optional properties (port (child) node): - st,px_rx_pol_inv : to invert polarity of RXn/RXp (respectively negative line and positive line). - st,scc-on : enable ssc to reduce effects of EMI (only for sata or PCIe). +- st,tx-impedance-comp : to compensate tx impedance avoiding out of range values. example: diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c index d8ff895..87dcc9a 100644 --- a/drivers/phy/phy-miphy28lp.c +++ b/drivers/phy/phy-miphy28lp.c @@ -204,6 +204,7 @@ struct miphy28lp_phy { bool osc_rdy; bool px_rx_pol_inv; bool ssc; + bool tx_impedance; struct reset_control *miphy_rst; @@ -632,6 +633,12 @@ static void miphy_pcie_tune_ssc(struct miphy28lp_phy *miphy_phy) } } +static inline void miphy_tune_tx_impedance(struct miphy28lp_phy *miphy_phy) +{ + /* Compensate Tx impedance to avoid out of range values */ + writeb_relaxed(0x02, miphy_phy->base + MIPHY_COMP_POSTP); +} + static inline int miphy28lp_configure_sata(struct miphy28lp_phy *miphy_phy) { void __iomem *base = miphy_phy->base; @@ -670,6 +677,9 @@ static inline int miphy28lp_configure_sata(struct miphy28lp_phy *miphy_phy) if (miphy_phy->ssc) miphy_sata_tune_ssc(miphy_phy); + if (miphy_phy->tx_impedance) + miphy_tune_tx_impedance(miphy_phy); + return 0; } @@ -703,6 +713,9 @@ static inline int miphy28lp_configure_pcie(struct miphy28lp_phy *miphy_phy) if (miphy_phy->ssc) miphy_pcie_tune_ssc(miphy_phy); + if (miphy_phy->tx_impedance) + miphy_tune_tx_impedance(miphy_phy); + return 0; } @@ -1154,6 +1167,9 @@ static int miphy28lp_of_probe(struct device_node *np, miphy_phy->ssc = of_property_read_bool(np, "st,ssc-on"); + miphy_phy->tx_impedance = + of_property_read_bool(np, "st,tx-impedance-comp"); + of_property_read_u32(np, "st,sata-gen", &miphy_phy->sata_gen); if (!miphy_phy->sata_gen) miphy_phy->sata_gen = SATA_GEN1; -- 1.7.9.5