From: Jilai Wang <jilaiw@codeaurora.org>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
robdclark@gmail.com, Jilai Wang <jilaiw@codeaurora.org>
Subject: [PATCH 2/4] drm/msm/hdmi: enable regulators before clocks to avoid warnings
Date: Mon, 1 Dec 2014 15:10:37 -0500 [thread overview]
Message-ID: <1417464637-29461-1-git-send-email-jilaiw@codeaurora.org> (raw)
HPD regulators need to be enabled before clocks, otherwise clock
driver will report warning.
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 45 +++++++++++++------------------
1 file changed, 18 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index 92fddd8..caa1301 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -141,6 +141,15 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector)
uint32_t hpd_ctrl;
int i, ret;
+ for (i = 0; i < config->hpd_reg_cnt; i++) {
+ ret = regulator_enable(hdmi->hpd_regs[i]);
+ if (ret) {
+ dev_err(dev->dev, "failed to enable hpd regulator: %s (%d)\n",
+ config->hpd_reg_names[i], ret);
+ goto fail;
+ }
+ }
+
ret = gpio_config(hdmi, true);
if (ret) {
dev_err(dev->dev, "failed to configure GPIOs: %d\n", ret);
@@ -164,15 +173,6 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector)
}
}
- for (i = 0; i < config->hpd_reg_cnt; i++) {
- ret = regulator_enable(hdmi->hpd_regs[i]);
- if (ret) {
- dev_err(dev->dev, "failed to enable hpd regulator: %s (%d)\n",
- config->hpd_reg_names[i], ret);
- goto fail;
- }
- }
-
hdmi_set_mode(hdmi, false);
phy->funcs->reset(phy);
hdmi_set_mode(hdmi, true);
@@ -200,7 +200,7 @@ fail:
return ret;
}
-static int hdp_disable(struct hdmi_connector *hdmi_connector)
+static void hdp_disable(struct hdmi_connector *hdmi_connector)
{
struct hdmi *hdmi = hdmi_connector->hdmi;
const struct hdmi_platform_config *config = hdmi->config;
@@ -212,28 +212,19 @@ static int hdp_disable(struct hdmi_connector *hdmi_connector)
hdmi_set_mode(hdmi, false);
- for (i = 0; i < config->hpd_reg_cnt; i++) {
- ret = regulator_disable(hdmi->hpd_regs[i]);
- if (ret) {
- dev_err(dev->dev, "failed to disable hpd regulator: %s (%d)\n",
- config->hpd_reg_names[i], ret);
- goto fail;
- }
- }
-
for (i = 0; i < config->hpd_clk_cnt; i++)
clk_disable_unprepare(hdmi->hpd_clks[i]);
ret = gpio_config(hdmi, false);
- if (ret) {
- dev_err(dev->dev, "failed to unconfigure GPIOs: %d\n", ret);
- goto fail;
- }
-
- return 0;
+ if (ret)
+ dev_warn(dev->dev, "failed to unconfigure GPIOs: %d\n", ret);
-fail:
- return ret;
+ for (i = 0; i < config->hpd_reg_cnt; i++) {
+ ret = regulator_disable(hdmi->hpd_regs[i]);
+ if (ret)
+ dev_warn(dev->dev, "failed to disable hpd regulator: %s (%d)\n",
+ config->hpd_reg_names[i], ret);
+ }
}
static void
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2014-12-01 20:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-01 20:10 Jilai Wang [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-11-26 20:16 Jilai Wang
2014-12-01 19:08 ` Christopher Covington
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417464637-29461-1-git-send-email-jilaiw@codeaurora.org \
--to=jilaiw@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome