mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Feng Wu <feng.wu@intel.com>
To: tglx@linutronix.de, mingo@redhat.com, hpa@zytor.com,
	x86@kernel.org, gleb@kernel.org, pbonzini@redhat.com,
	dwmw2@infradead.org, joro@8bytes.org, alex.williamson@redhat.com,
	jiang.liu@linux.intel.com
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
	kvm@vger.kernel.org, Feng Wu <feng.wu@intel.com>
Subject: [v2 13/25] KVM: Define a new interface kvm_find_dest_vcpu() for VT-d PI
Date: Wed,  3 Dec 2014 15:39:42 +0800	[thread overview]
Message-ID: <1417592394-24343-14-git-send-email-feng.wu@intel.com> (raw)
In-Reply-To: <1417592394-24343-1-git-send-email-feng.wu@intel.com>

This patch defines a new interface kvm_find_dest_vcpu for
VT-d PI, which can returns the destination vCPU of the
interrupt for guests.

Since VT-d PI cannot handle broadcast/multicast interrupt,
Here we only handle Fixed and Lowest priority interrupts.

The current method of handling guest lowest priority interrtups
is to use a counter 'apic_arb_prio' for each vCPU, we choose the
vCPU with smallest 'apic_arb_prio' and then increase it by 1.
However, for VT-d PI, we cannot re-use this, since we no longer
have control to 'apic_arb_prio' with posted interrupt direct
delivery by Hardware.

Here, we introduce a similar way with 'apic_arb_prio' to handle
guest lowest priority interrtups when VT-d PI is used. Here is the
ideas:
- Each vCPU has a counter 'round_robin_counter'.
- When guests sets an interrupts to lowest priority, we choose
the vCPU with smallest 'round_robin_counter' as the destination,
then increase it.

Signed-off-by: Feng Wu <feng.wu@intel.com>
---
 arch/x86/include/asm/kvm_host.h |    4 +++
 virt/kvm/irq_comm.c             |   41 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 6ed0c30..7a41808 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -358,6 +358,7 @@ struct kvm_vcpu_arch {
 	struct kvm_lapic *apic;    /* kernel irqchip context */
 	unsigned long apic_attention;
 	int32_t apic_arb_prio;
+	int32_t round_robin_counter;
 	int mp_state;
 	u64 ia32_misc_enable_msr;
 	bool tpr_access_reporting;
@@ -1093,4 +1094,7 @@ int kvm_pmu_read_pmc(struct kvm_vcpu *vcpu, unsigned pmc, u64 *data);
 void kvm_handle_pmu_event(struct kvm_vcpu *vcpu);
 void kvm_deliver_pmi(struct kvm_vcpu *vcpu);
 
+bool kvm_find_dest_vcpu(struct kvm *kvm, struct kvm_lapic_irq *irq,
+			struct kvm_vcpu **dest_vcpu);
+
 #endif /* _ASM_X86_KVM_HOST_H */
diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
index 963b899..f3c5d69 100644
--- a/virt/kvm/irq_comm.c
+++ b/virt/kvm/irq_comm.c
@@ -317,6 +317,47 @@ out:
 	return r;
 }
 
+int kvm_compare_rr_counter(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2)
+{
+	return vcpu1->arch.round_robin_counter -
+			vcpu2->arch.round_robin_counter;
+}
+
+bool kvm_find_dest_vcpu(struct kvm *kvm, struct kvm_lapic_irq *irq,
+				struct kvm_vcpu **dest_vcpu)
+{
+	int i, r = 0;
+	struct kvm_vcpu *vcpu, *dest = NULL;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (!kvm_apic_present(vcpu))
+			continue;
+
+		if (!kvm_apic_match_dest(vcpu, NULL, irq->shorthand,
+					irq->dest_id, irq->dest_mode))
+			continue;
+
+		if (!kvm_is_dm_lowest_prio(irq)) {
+			r++;
+			*dest_vcpu = vcpu;
+		} else if (kvm_lapic_enabled(vcpu)) {
+			if (!dest)
+				dest = vcpu;
+			else if (kvm_compare_rr_counter(vcpu, dest) < 0)
+				dest = vcpu;
+		}
+	}
+
+	if (dest) {
+		dest->arch.round_robin_counter++;
+		*dest_vcpu = dest;
+		return true;
+	} else if (r == 1)
+		return true;
+
+	return false;
+}
+
 #define IOAPIC_ROUTING_ENTRY(irq) \
 	{ .gsi = irq, .type = KVM_IRQ_ROUTING_IRQCHIP,	\
 	  .u.irqchip = { .irqchip = KVM_IRQCHIP_IOAPIC, .pin = (irq) } }
-- 
1.7.1


  parent reply	other threads:[~2014-12-03  7:54 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-03  7:39 [v2 00/25] Add VT-d Posted-Interrupts support Feng Wu
2014-12-03  7:39 ` [v2 01/25] genirq: Introduce irq_set_vcpu_affinity() to target an interrupt to a VCPU Feng Wu
2014-12-03  7:39 ` [v2 02/25] iommu: Add new member capability to struct irq_remap_ops Feng Wu
2014-12-03  7:39 ` [v2 03/25] iommu, x86: Define new irte structure for VT-d Posted-Interrupts Feng Wu
2014-12-03  7:39 ` [v2 04/25] iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip Feng Wu
2014-12-03  7:39 ` [v2 05/25] x86, irq: Implement irq_set_vcpu_affinity for pci_msi_ir_controller Feng Wu
2014-12-03  7:39 ` [v2 06/25] iommu, x86: No need to migrating irq for VT-d Posted-Interrupts Feng Wu
2014-12-03  7:39 ` [v2 07/25] iommu, x86: Add cap_pi_support() to detect VT-d PI capability Feng Wu
2014-12-03  7:39 ` [v2 08/25] iommu, x86: Add intel_irq_remapping_capability() for Intel Feng Wu
2014-12-03  7:39 ` [v2 09/25] iommu, x86: define irq_remapping_cap() Feng Wu
2014-12-03  7:39 ` [v2 10/25] KVM: change struct pi_desc for VT-d Posted-Interrupts Feng Wu
2014-12-03  7:39 ` [v2 11/25] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2014-12-03  7:39 ` [v2 12/25] KVM: Initialize VT-d Posted-Interrupts Descriptor Feng Wu
2014-12-03  7:39 ` Feng Wu [this message]
2014-12-03  7:39 ` [v2 14/25] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2014-12-03  7:39 ` [v2 15/25] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2014-12-03  7:39 ` [v2 16/25] KVM: make kvm_set_msi_irq() public Feng Wu
2014-12-03  7:39 ` [v2 17/25] KVM: kvm-vfio: User API for VT-d Posted-Interrupts Feng Wu
2014-12-04 14:04   ` Eric Auger
2014-12-08  4:58     ` Wu, Feng
2014-12-08  5:21       ` Alex Williamson
2014-12-09 11:38         ` Wu, Feng
2014-12-11  5:55         ` Wu, Feng
2014-12-11 15:45           ` Alex Williamson
2014-12-03  7:39 ` [v2 18/25] KVM: kvm-vfio: implement the VFIO skeleton " Feng Wu
2014-12-04 15:35   ` Eric Auger
2014-12-08  4:58     ` Wu, Feng
2014-12-08  5:12       ` Alex Williamson
2014-12-08 10:15         ` Eric Auger
2014-12-09 11:51           ` Wu, Feng
2014-12-03  7:39 ` [v2 19/25] KVM: x86: kvm-vfio: VT-d posted-interrupts setup Feng Wu
2014-12-03  7:39 ` [v2 20/25] x86, irq: Define a global vector for VT-d Posted-Interrupts Feng Wu
2014-12-03  7:39 ` [v2 21/25] KVM: Update Posted-Interrupts descriptor during vCPU scheduling Feng Wu
2014-12-03  7:39 ` [v2 22/25] KVM: Change NDST field after " Feng Wu
2014-12-03  7:39 ` [v2 23/25] KVM: Add the handler for Wake-up Vector Feng Wu
2014-12-03  7:39 ` [v2 24/25] KVM: Suppress posted-interrupt when 'SN' is set Feng Wu
2014-12-03  7:39 ` [v2 25/25] iommu/vt-d: Add a command line parameter for VT-d posted-interrupts Feng Wu
2014-12-08 13:36 ` [v2 00/25] Add VT-d Posted-Interrupts support Wu, Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417592394-24343-14-git-send-email-feng.wu@intel.com \
    --to=feng.wu@intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=dwmw2@infradead.org \
    --cc=gleb@kernel.org \
    --cc=hpa@zytor.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jiang.liu@linux.intel.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®