From: Sifan Naeem <sifan.naeem@imgtec.com>
To: <james.hogan@imgtec.com>, <mchehab@osg.samsung.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
<james.hartley@imgtec.com>, <ezequiel.garcia@imgtec.com>,
Sifan Naeem <sifan.naeem@imgtec.com>
Subject: [PATCH 3/5] rc: img-ir: biphase enabled with workaround
Date: Thu, 4 Dec 2014 15:38:40 +0000 [thread overview]
Message-ID: <1417707523-7730-4-git-send-email-sifan.naeem@imgtec.com> (raw)
In-Reply-To: <1417707523-7730-1-git-send-email-sifan.naeem@imgtec.com>
Biphase decoding in the current img-ir has got a quirk, where multiple
Interrupts are generated when an incomplete IR code is received by the
decoder.
Patch adds a work around for the quirk and enables biphase decoding.
Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com>
---
drivers/media/rc/img-ir/img-ir-hw.c | 56 +++++++++++++++++++++++++++++++++--
drivers/media/rc/img-ir/img-ir-hw.h | 2 ++
2 files changed, 55 insertions(+), 3 deletions(-)
diff --git a/drivers/media/rc/img-ir/img-ir-hw.c b/drivers/media/rc/img-ir/img-ir-hw.c
index 4a1407b..a977467 100644
--- a/drivers/media/rc/img-ir/img-ir-hw.c
+++ b/drivers/media/rc/img-ir/img-ir-hw.c
@@ -52,6 +52,11 @@ static struct img_ir_decoder *img_ir_decoders[] = {
#define IMG_IR_QUIRK_CODE_BROKEN 0x1 /* Decode is broken */
#define IMG_IR_QUIRK_CODE_LEN_INCR 0x2 /* Bit length needs increment */
+/*
+ * The decoder generates rapid interrupts without actually having
+ * received any new data after an incomplete IR code is decoded.
+ */
+#define IMG_IR_QUIRK_CODE_IRQ 0x4
/* functions for preprocessing timings, ensuring max is set */
@@ -547,6 +552,7 @@ static void img_ir_set_decoder(struct img_ir_priv *priv,
/* stop the end timer and switch back to normal mode */
del_timer_sync(&hw->end_timer);
+ del_timer_sync(&hw->suspend_timer);
hw->mode = IMG_IR_M_NORMAL;
/* clear the wakeup scancode filter */
@@ -843,6 +849,26 @@ static void img_ir_end_timer(unsigned long arg)
spin_unlock_irq(&priv->lock);
}
+/*
+ * Timer function to re-enable the current protocol after it had been
+ * cleared when invalid interrupts were generated due to a quirk in the
+ * img-ir decoder.
+ */
+static void img_ir_suspend_timer(unsigned long arg)
+{
+ struct img_ir_priv *priv = (struct img_ir_priv *)arg;
+
+ img_ir_write(priv, IMG_IR_IRQ_CLEAR,
+ IMG_IR_IRQ_ALL & ~IMG_IR_IRQ_EDGE);
+
+ /* Don't set IRQ if it has changed in a different context. */
+ if ((priv->hw.suspend_irqen & IMG_IR_IRQ_EDGE) ==
+ img_ir_read(priv, IMG_IR_IRQ_ENABLE))
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE, priv->hw.suspend_irqen);
+ /* enable */
+ img_ir_write(priv, IMG_IR_CONTROL, priv->hw.reg_timings.ctrl);
+}
+
#ifdef CONFIG_COMMON_CLK
static void img_ir_change_frequency(struct img_ir_priv *priv,
struct clk_notifier_data *change)
@@ -908,15 +934,37 @@ void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status)
if (!hw->decoder)
return;
+ ct = hw->decoder->control.code_type;
+
ir_status = img_ir_read(priv, IMG_IR_STATUS);
- if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2)))
+ if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2))) {
+ if (!(priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_IRQ))
+ return;
+ /*
+ * The below functionality is added as a work around to stop
+ * multiple Interrupts generated when an incomplete IR code is
+ * received by the decoder.
+ * The decoder generates rapid interrupts without actually
+ * having received any new data. After a single interrupt it's
+ * expected to clear up, but instead multiple interrupts are
+ * rapidly generated. only way to get out of this loop is to
+ * reset the control register after a short delay.
+ */
+ img_ir_write(priv, IMG_IR_CONTROL, 0);
+ hw->suspend_irqen = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+ img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+ hw->suspend_irqen & IMG_IR_IRQ_EDGE);
+
+ /* Timer activated to re-enable the protocol. */
+ mod_timer(&hw->suspend_timer,
+ jiffies + msecs_to_jiffies(5));
return;
+ }
ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2);
img_ir_write(priv, IMG_IR_STATUS, ir_status);
len = (ir_status & IMG_IR_RXDLEN) >> IMG_IR_RXDLEN_SHIFT;
/* some versions report wrong length for certain code types */
- ct = hw->decoder->control.code_type;
if (hw->ct_quirks[ct] & IMG_IR_QUIRK_CODE_LEN_INCR)
++len;
@@ -958,7 +1006,7 @@ static void img_ir_probe_hw_caps(struct img_ir_priv *priv)
hw->ct_quirks[IMG_IR_CODETYPE_PULSELEN]
|= IMG_IR_QUIRK_CODE_LEN_INCR;
hw->ct_quirks[IMG_IR_CODETYPE_BIPHASE]
- |= IMG_IR_QUIRK_CODE_BROKEN;
+ |= IMG_IR_QUIRK_CODE_IRQ;
hw->ct_quirks[IMG_IR_CODETYPE_2BITPULSEPOS]
|= IMG_IR_QUIRK_CODE_BROKEN;
}
@@ -977,6 +1025,8 @@ int img_ir_probe_hw(struct img_ir_priv *priv)
/* Set up the end timer */
setup_timer(&hw->end_timer, img_ir_end_timer, (unsigned long)priv);
+ setup_timer(&hw->suspend_timer, img_ir_suspend_timer,
+ (unsigned long)priv);
/* Register a clock notifier */
if (!IS_ERR(priv->clk)) {
diff --git a/drivers/media/rc/img-ir/img-ir-hw.h b/drivers/media/rc/img-ir/img-ir-hw.h
index 5e59e8e..8578aa7 100644
--- a/drivers/media/rc/img-ir/img-ir-hw.h
+++ b/drivers/media/rc/img-ir/img-ir-hw.h
@@ -221,6 +221,7 @@ enum img_ir_mode {
* @rdev: Remote control device
* @clk_nb: Notifier block for clock notify events.
* @end_timer: Timer until repeat timeout.
+ * @suspend_timer: Timer to re-enable protocol.
* @decoder: Current decoder settings.
* @enabled_protocols: Currently enabled protocols.
* @clk_hz: Current core clock rate in Hz.
@@ -235,6 +236,7 @@ struct img_ir_priv_hw {
struct rc_dev *rdev;
struct notifier_block clk_nb;
struct timer_list end_timer;
+ struct timer_list suspend_timer;
const struct img_ir_decoder *decoder;
u64 enabled_protocols;
unsigned long clk_hz;
--
1.7.9.5
next prev parent reply other threads:[~2014-12-04 15:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 15:38 [PATCH 0/5] rc: img-ir: rc5 and rc6 support added Sifan Naeem
2014-12-04 15:38 ` [PATCH 1/5] rc: img-ir: add scancode requests to a struct Sifan Naeem
2014-12-08 16:47 ` James Hogan
2014-12-04 15:38 ` [PATCH 2/5] rc: img-ir: pass toggle bit to the rc driver Sifan Naeem
2014-12-08 16:49 ` James Hogan
2014-12-04 15:38 ` Sifan Naeem [this message]
2014-12-08 17:17 ` [PATCH 3/5] rc: img-ir: biphase enabled with workaround James Hogan
2014-12-11 18:54 ` Sifan Naeem
2014-12-12 10:55 ` James Hogan
2014-12-12 12:35 ` Sifan Naeem
2014-12-04 15:38 ` [PATCH 4/5] rc: img-ir: add philips rc5 decoder module Sifan Naeem
2014-12-08 17:41 ` James Hogan
2014-12-04 15:38 ` [PATCH 5/5] rc: img-ir: add philips rc6 " Sifan Naeem
2014-12-08 17:45 ` James Hogan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417707523-7730-4-git-send-email-sifan.naeem@imgtec.com \
--to=sifan.naeem@imgtec.com \
--cc=ezequiel.garcia@imgtec.com \
--cc=james.hartley@imgtec.com \
--cc=james.hogan@imgtec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®