From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: rkrcmar@redhat.com, Wanpeng Li <wanpeng.li@linux.intel.com>
Subject: [PATCH 8/9] kvm: vmx: add MSR logic for XSAVES
Date: Thu, 4 Dec 2014 16:57:13 +0100 [thread overview]
Message-ID: <1417708634-24333-9-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1417708634-24333-1-git-send-email-pbonzini@redhat.com>
From: Wanpeng Li <wanpeng.li@linux.intel.com>
Add logic to get/set the XSS model-specific register.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/vmx.c | 29 ++++++++++++++++++++++++++++-
2 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 0271f6bcf123..0c4c88c008ce 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -362,6 +362,7 @@ struct kvm_vcpu_arch {
int mp_state;
u64 ia32_misc_enable_msr;
bool tpr_access_reporting;
+ u64 ia32_xss;
/*
* Paging state of the vcpu
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 88048c72b6b1..ad1153a725a2 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -99,6 +99,8 @@ module_param_named(enable_shadow_vmcs, enable_shadow_vmcs, bool, S_IRUGO);
static bool __read_mostly nested = 0;
module_param(nested, bool, S_IRUGO);
+static u64 __read_mostly host_xss;
+
#define KVM_GUEST_CR0_MASK (X86_CR0_NW | X86_CR0_CD)
#define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST (X86_CR0_WP | X86_CR0_NE)
#define KVM_VM_CR0_ALWAYS_ON \
@@ -2570,6 +2572,11 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
if (!nested_vmx_allowed(vcpu))
return 1;
return vmx_get_vmx_msr(vcpu, msr_index, pdata);
+ case MSR_IA32_XSS:
+ if (!vmx_xsaves_supported())
+ return 1;
+ data = vcpu->arch.ia32_xss;
+ break;
case MSR_TSC_AUX:
if (!to_vmx(vcpu)->rdtscp_enabled)
return 1;
@@ -2661,6 +2668,22 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
break;
case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC:
return 1; /* they are read-only */
+ case MSR_IA32_XSS:
+ if (!vmx_xsaves_supported())
+ return 1;
+ /*
+ * The only supported bit as of Skylake is bit 8, but
+ * it is not supported on KVM.
+ */
+ if (data != 0)
+ return 1;
+ vcpu->arch.ia32_xss = data;
+ if (vcpu->arch.ia32_xss != host_xss)
+ add_atomic_switch_msr(vmx, MSR_IA32_XSS,
+ vcpu->arch.ia32_xss, host_xss);
+ else
+ clear_atomic_switch_msr(vmx, MSR_IA32_XSS);
+ break;
case MSR_TSC_AUX:
if (!vmx->rdtscp_enabled)
return 1;
@@ -2896,7 +2919,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
SECONDARY_EXEC_ENABLE_INVPCID |
SECONDARY_EXEC_APIC_REGISTER_VIRT |
SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
- SECONDARY_EXEC_SHADOW_VMCS;
+ SECONDARY_EXEC_SHADOW_VMCS |
+ SECONDARY_EXEC_XSAVES;
if (adjust_vmx_controls(min2, opt2,
MSR_IA32_VMX_PROCBASED_CTLS2,
&_cpu_based_2nd_exec_control) < 0)
@@ -3019,6 +3043,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
}
}
+ if (cpu_has_xsaves)
+ rdmsrl(MSR_IA32_XSS, host_xss);
+
return 0;
}
--
1.8.3.1
next prev parent reply other threads:[~2014-12-04 15:58 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 15:57 [PATCH 0/9] Final set of XSAVES patches Paolo Bonzini
2014-12-04 15:57 ` [PATCH 1/9] x86: export get_xsave_addr Paolo Bonzini
2014-12-04 16:34 ` Greg KH
2014-12-04 17:29 ` Paolo Bonzini
2014-12-04 15:57 ` [PATCH 2/9] KVM: x86: support XSAVES usage in the host Paolo Bonzini
2014-12-04 17:56 ` Radim Krčmář
2014-12-04 15:57 ` [PATCH 3/9] KVM: x86: use F() macro throughout cpuid.c Paolo Bonzini
2014-12-04 15:57 ` [PATCH 4/9] kvm: x86: Add kvm_x86_ops hook that enables XSAVES for guest Paolo Bonzini
2014-12-05 13:32 ` Radim Krčmář
2014-12-04 15:57 ` [PATCH 5/9] KVM: cpuid: set CPUID(EAX=0xd,ECX=1).EBX correctly Paolo Bonzini
2014-12-05 0:40 ` Wanpeng Li
2014-12-04 15:57 ` [PATCH 6/9] KVM: cpuid: mask more bits in leaf 0xd and subleaves Paolo Bonzini
2014-12-05 0:34 ` Wanpeng Li
2014-12-05 1:20 ` Wanpeng Li
2014-12-04 15:57 ` [PATCH 7/9] kvm: x86: handle XSAVES vmcs and vmexit Paolo Bonzini
2014-12-04 18:06 ` Radim Krčmář
2014-12-04 15:57 ` Paolo Bonzini [this message]
2014-12-04 18:05 ` [PATCH 8/9] kvm: vmx: add MSR logic for XSAVES Radim Krčmář
2014-12-04 18:07 ` Radim Krčmář
2014-12-04 15:57 ` [PATCH 9/9] kvm: vmx: add nested virtualization support for xsaves Paolo Bonzini
2014-12-04 18:08 ` Radim Krčmář
2014-12-05 1:15 ` [PATCH 0/9] Final set of XSAVES patches Wanpeng Li
2014-12-05 7:27 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417708634-24333-9-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rkrcmar@redhat.com \
--cc=wanpeng.li@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®