From: Yunzhi Li <lyz@rock-chips.com>
To: heiko@sntech.de, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, jwerner@chromium.org,
dianders@chromium.org, olof@lixom.net, huangtao@rock-chips.com,
zyw@rock-chips.com, cf@rock-chips.com
Cc: Yunzhi Li <lyz@rock-chips.com>
Subject: [PATCH v7 4/5] ARM: dts: rockchip: add rk3288 usb PHY
Date: Fri, 12 Dec 2014 23:12:21 +0800 [thread overview]
Message-ID: <1418397141-1079-1-git-send-email-lyz@rock-chips.com> (raw)
In-Reply-To: <1418396413-27937-1-git-send-email-lyz@rock-chips.com>
This patch adds a device_node for RK3288 SoC usb phy. It also
defines the phy to be used by three usb controllers: usb_host0/1
and usb_otg.
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
---
Changes in v7:
- Update dtsi for new usb phy driver.
Changes in v6: None
Changes in v5:
- reorder the phy dt node to a correct position.
Changes in v4:
- Add phy subnodes.
Changes in v3: None
arch/arm/boot/dts/rk3288.dtsi | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 874e66d..2a9a029 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -335,6 +335,8 @@
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST0>;
clock-names = "usbhost";
+ phys = <&usbphy1>;
+ phy-names = "usb";
status = "disabled";
};
@@ -347,6 +349,8 @@
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST1>;
clock-names = "otg";
+ phys = <&usbphy2>;
+ phy-names = "usb2-phy";
status = "disabled";
};
@@ -357,6 +361,8 @@
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
status = "disabled";
};
@@ -497,6 +503,35 @@
interrupts = <GIC_PPI 9 0xf04>;
};
+ usbphy: phy {
+ compatible = "rockchip,rk3288-usb-phy";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy0 {
+ #phy-cells = <0>;
+ reg = <0x320>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ };
+
+ usbphy1: usb-phy1 {
+ #phy-cells = <0>;
+ reg = <0x334>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ };
+
+ usbphy2: usb-phy2 {
+ #phy-cells = <0>;
+ reg = <0x348>;
+ clocks = <&cru SCLK_OTGPHY2>;
+ clock-names = "phyclk";
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3288-pinctrl";
rockchip,grf = <&grf>;
--
2.0.0
next prev parent reply other threads:[~2014-12-12 15:12 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-12 15:00 [PATCH v7 0/5] Patches to add support for Rockchip usb PHYs Yunzhi Li
2014-12-12 15:00 ` [PATCH v7 1/5] Documentation: bindings: add dt documentation for Rockchip usb PHY Yunzhi Li
2014-12-12 15:07 ` [PATCH v7 2/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY Yunzhi Li
2014-12-13 0:19 ` Doug Anderson
2014-12-13 7:24 ` Kishon Vijay Abraham I
2014-12-13 23:12 ` Doug Anderson
2014-12-15 18:12 ` Doug Anderson
2015-01-21 9:48 ` Kishon Vijay Abraham I
2015-01-21 10:06 ` Yunzhi Li
2015-01-21 10:10 ` Kishon Vijay Abraham I
2015-01-21 10:21 ` Yunzhi Li
2014-12-12 15:09 ` [PATCH v7 3/5] usb: dwc2: add generic PHY framework support for dwc2 usb controler platform driver Yunzhi Li
2014-12-15 18:13 ` Doug Anderson
2015-01-09 2:15 ` Paul Zimmerman
2015-01-10 13:54 ` Yunzhi Li
2015-01-10 16:06 ` Yunzhi Li
2015-01-10 23:51 ` Paul Zimmerman
2015-01-13 0:54 ` Paul Zimmerman
2015-01-13 9:35 ` Robert Jarzmik
2015-01-13 15:30 ` Felipe Balbi
2014-12-12 15:12 ` Yunzhi Li [this message]
2014-12-15 18:14 ` [PATCH v7 4/5] ARM: dts: rockchip: add rk3288 usb PHY Doug Anderson
2014-12-12 15:17 ` [PATCH v7 5/5] ARM: dts: rockchip: Enable usb PHY on rk3288-evb board Yunzhi Li
2014-12-15 18:15 ` Doug Anderson
2015-02-19 22:36 ` [PATCH v7 0/5] Patches to add support for Rockchip usb PHYs Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418397141-1079-1-git-send-email-lyz@rock-chips.com \
--to=lyz@rock-chips.com \
--cc=cf@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jwerner@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®