From: Roger Quadros <rogerq@ti.com>
To: <kishon@ti.com>, <tony@atomide.com>
Cc: <nm@ti.com>, <balbi@ti.com>, <george.cherian@ti.com>,
<nsekhar@ti.com>, <linux-omap@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH 0/2] phy: ti-pipe3: fixes for 3.19-rc
Date: Fri, 19 Dec 2014 14:05:18 +0200 [thread overview]
Message-ID: <1418990720-3638-1-git-send-email-rogerq@ti.com> (raw)
Hi,
During system suspend L3INIT_960M_GFCLK and L3INIT_480M_GFCLK clocks remain
active on the DRA7 platform. This is because the pipe3 driver doesn't shut
them off as part of .suspend(). Patch 1 addresses this issue.
SATA on both OMAP5 and DRA7 breaks when SATA drive is plugged in after a
system suspend/resume or if AHCI_PLATFORM driver is used as module.
Patch 2 fixes it.
Hope to get these 2 patches in through the 3.19-rc cycle.
Tony, patch 2 touches dra7.dtsi and omap5.dts and will need your Ack.
Hopefully it can go in through Kishon's PHY tree.
cheers,
-roger
Roger Quadros (2):
phy: ti-pipe3: Disable clocks on system suspend
phy: ti-pipe3: Fix SATA across suspend/resume
arch/arm/boot/dts/dra7.dtsi | 4 +-
arch/arm/boot/dts/omap5.dtsi | 4 +-
drivers/phy/phy-ti-pipe3.c | 138 +++++++++++++++++++++++++++++++++----------
3 files changed, 111 insertions(+), 35 deletions(-)
--
2.1.0
next reply other threads:[~2014-12-19 12:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-19 12:05 Roger Quadros [this message]
2014-12-19 12:05 ` [PATCH 1/2] phy: ti-pipe3: Disable clocks on system suspend Roger Quadros
2015-01-09 13:57 ` Kishon Vijay Abraham I
2015-01-12 9:21 ` Roger Quadros
2014-12-19 12:05 ` [PATCH 2/2] phy: ti-pipe3: Fix SATA across suspend/resume Roger Quadros
2014-12-22 13:52 ` Kishon Vijay Abraham I
2014-12-29 9:53 ` Roger Quadros
2015-01-08 11:17 ` [PATCH v2 " Roger Quadros
2015-01-09 13:59 ` Kishon Vijay Abraham I
2015-01-12 9:23 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418990720-3638-1-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=george.cherian@ti.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®