From: Sreekanth Reddy <sreekanth.reddy@avagotech.com>
To: jejb@kernel.org, hch@infradead.org
Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
JBottomley@Parallels.com, Sathya.Prakash@avagotech.com,
Nagalakshmi.Nandigama@avagotech.com,
linux-kernel@vger.kernel.org,
Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Subject: [PATCH v2 09/22] [SCSI] mpt2sas, mpt3sas: Added a support to set cpu affinity for each MSIX vector enabled by the HBA
Date: Mon, 12 Jan 2015 11:39:03 +0530 [thread overview]
Message-ID: <1421042944-14988-10-git-send-email-Sreekanth.Reddy@avagotech.com> (raw)
In-Reply-To: <1421042944-14988-1-git-send-email-Sreekanth.Reddy@avagotech.com>
Added a support to set cpu affinity mask for each MSIX vector enabled by the HBA.
So that, running the irqbalancer will balance interrupts among the cpus.
Change_set:
1. Added affinity_hint varable of type cpumask_var_t in adapter_reply_queue
structure. And allocated a memory for this varable by calling alloc_cpumask_var.
2. Call the API irq_set_affinity_hint for each MSIx vector to affiniate it
with calculated cpus at driver inilization time.
3. While freeing the MSIX vector, call this same API to release the cpu affinity mask
for each MSIx vector by providing the NULL value in cpumask argument.
4. then call the free_cpumask_var API to free the memory allocated in step 2.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
drivers/scsi/mpt2sas/mpt2sas_base.c | 24 +++++++++++++++++++++---
drivers/scsi/mpt2sas/mpt2sas_base.h | 1 +
drivers/scsi/mpt3sas/mpt3sas_base.c | 24 +++++++++++++++++++++---
drivers/scsi/mpt3sas/mpt3sas_base.h | 1 +
4 files changed, 44 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 137862c..599606b 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1300,6 +1300,8 @@ _base_free_irq(struct MPT2SAS_ADAPTER *ioc)
list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
list_del(&reply_q->list);
+ irq_set_affinity_hint(reply_q->vector, NULL);
+ free_cpumask_var(reply_q->affinity_hint);
synchronize_irq(reply_q->vector);
free_irq(reply_q->vector, reply_q);
kfree(reply_q);
@@ -1329,6 +1331,11 @@ _base_request_irq(struct MPT2SAS_ADAPTER *ioc, u8 index, u32 vector)
reply_q->ioc = ioc;
reply_q->msix_index = index;
reply_q->vector = vector;
+
+ if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_clear(reply_q->affinity_hint);
+
atomic_set(&reply_q->busy, 0);
if (ioc->msix_enable)
snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
@@ -1363,6 +1370,7 @@ static void
_base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
{
unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ struct adapter_reply_queue *reply_q;
if (!_base_is_controller_msix_enabled(ioc))
return;
@@ -1377,20 +1385,30 @@ _base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
cpu = cpumask_first(cpu_online_mask);
- do {
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+
unsigned int i, group = nr_cpus / nr_msix;
+ if (cpu >= nr_cpus)
+ break;
+
if (index < nr_cpus % nr_msix)
group++;
for (i = 0 ; i < group ; i++) {
ioc->cpu_msix_table[cpu] = index;
+ cpumask_or(reply_q->affinity_hint,
+ reply_q->affinity_hint, get_cpu_mask(cpu));
cpu = cpumask_next(cpu, cpu_online_mask);
}
+ if (irq_set_affinity_hint(reply_q->vector,
+ reply_q->affinity_hint))
+ dinitprintk(ioc, pr_info(MPT2SAS_FMT
+ "error setting affinity hint for irq vector %d\n",
+ ioc->name, reply_q->vector));
index++;
-
- } while (cpu < nr_cpus);
+ }
}
/**
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 72bffec..46e8d51 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -587,6 +587,7 @@ struct adapter_reply_queue {
Mpi2ReplyDescriptorsUnion_t *reply_post_free;
char name[MPT_NAME_LENGTH];
atomic_t busy;
+ cpumask_var_t affinity_hint;
struct list_head list;
};
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 961bd9d..4f6fb88 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1584,6 +1584,8 @@ _base_free_irq(struct MPT3SAS_ADAPTER *ioc)
list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
list_del(&reply_q->list);
+ irq_set_affinity_hint(reply_q->vector, NULL);
+ free_cpumask_var(reply_q->affinity_hint);
synchronize_irq(reply_q->vector);
free_irq(reply_q->vector, reply_q);
kfree(reply_q);
@@ -1613,6 +1615,11 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
reply_q->ioc = ioc;
reply_q->msix_index = index;
reply_q->vector = vector;
+
+ if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_clear(reply_q->affinity_hint);
+
atomic_set(&reply_q->busy, 0);
if (ioc->msix_enable)
snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
@@ -1647,6 +1654,7 @@ static void
_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
{
unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ struct adapter_reply_queue *reply_q;
if (!_base_is_controller_msix_enabled(ioc))
return;
@@ -1661,20 +1669,30 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
cpu = cpumask_first(cpu_online_mask);
- do {
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+
unsigned int i, group = nr_cpus / nr_msix;
+ if (cpu >= nr_cpus)
+ break;
+
if (index < nr_cpus % nr_msix)
group++;
for (i = 0 ; i < group ; i++) {
ioc->cpu_msix_table[cpu] = index;
+ cpumask_or(reply_q->affinity_hint,
+ reply_q->affinity_hint, get_cpu_mask(cpu));
cpu = cpumask_next(cpu, cpu_online_mask);
}
+ if (irq_set_affinity_hint(reply_q->vector,
+ reply_q->affinity_hint))
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "error setting affinity hint for irq vector %d\n",
+ ioc->name, reply_q->vector));
index++;
-
- } while (cpu < nr_cpus);
+ }
}
/**
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 7e9f55b..afa8816 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -507,6 +507,7 @@ struct adapter_reply_queue {
Mpi2ReplyDescriptorsUnion_t *reply_post_free;
char name[MPT_NAME_LENGTH];
atomic_t busy;
+ cpumask_var_t affinity_hint;
struct list_head list;
};
--
2.0.2
next prev parent reply other threads:[~2015-01-12 6:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 6:08 [PATCH 00/10] mpt2sas: Phase19 and Phase20 patch set Sreekanth Reddy
2015-01-12 6:08 ` [PATCH v2 01/22] [SCSI] mpt2sas: MPI2 Rev AA (2.00.19) specifications Sreekanth Reddy
2015-01-12 6:08 ` [PATCH v2 02/22] [SCSI] mpt2sas, mpt3sas: Added support to log message when Temperature Threshold exceeds for any Sensor Sreekanth Reddy
2015-01-12 6:08 ` [PATCH v2 03/22] [SCSI] mpt2sas, mpt3sas: Fail the host reset initiated due to discovery related I/O timeouts at driver load time Sreekanth Reddy
2015-01-12 6:08 ` [PATCH v2 04/22] [SCSI] mpt2sas: Bump driver version to 19.100.00.00 Sreekanth Reddy
2015-01-12 6:08 ` [PATCH v2 05/22] [SCSI] mpt2sas: MPI2 Rev BB (2.00.20) specification and 2.00.35 header files Sreekanth Reddy
2015-01-12 6:09 ` [PATCH v2 06/22] [SCSI] mpt2sas, mpt3sas: Removing uppper boundary restriction for the module parameter max_sgl_entries Sreekanth Reddy
2015-01-12 6:09 ` [PATCH v2 07/22] [SCSI] mpt2sas: Complete the SCSI command with DID_RESET status for log_info value 0x0x32010081 Sreekanth Reddy
2015-01-12 6:09 ` [PATCH 08/22] [SCSI] mpt2sas, mpt3sas: Update Attribution Language to Avago Sreekanth Reddy
2015-01-12 6:09 ` Sreekanth Reddy [this message]
2015-01-12 6:09 ` [PATCH v2 10/22] [SCSI] mpt2sas: Bump driver version to 20.100.00.00 Sreekanth Reddy
2015-01-13 15:29 ` [PATCH 00/10] mpt2sas: Phase19 and Phase20 patch set Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421042944-14988-10-git-send-email-Sreekanth.Reddy@avagotech.com \
--to=sreekanth.reddy@avagotech.com \
--cc=JBottomley@Parallels.com \
--cc=Nagalakshmi.Nandigama@avagotech.com \
--cc=Sathya.Prakash@avagotech.com \
--cc=hch@infradead.org \
--cc=jejb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®