From: Semen Protsenko <semen.protsenko@globallogic.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Marc Zyngier <maz@misterjones.org>,
Grygorii Strashko <grygorii.strashko@globallogic.com>,
Illia Smyrnov <illia.smyrnov@globallogic.com>
Subject: [PATCH 4/4] gpio: max732x: Add DT binding documentation
Date: Tue, 13 Jan 2015 15:41:45 +0200 [thread overview]
Message-ID: <1421156505-16600-5-git-send-email-semen.protsenko@globallogic.com> (raw)
In-Reply-To: <1421156505-16600-1-git-send-email-semen.protsenko@globallogic.com>
Add a devicetree binding documentation for the max732x driver.
Signed-off-by: Semen Protsenko <semen.protsenko@globallogic.com>
---
.../devicetree/bindings/gpio/gpio-max732x.txt | 59 ++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max732x.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
new file mode 100644
index 0000000..5fdc843
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
@@ -0,0 +1,59 @@
+* MAX732x-compatible I/O expanders
+
+Required properties:
+ - compatible: Should be one of the following:
+ - "maxim,max7319": For the Maxim MAX7319
+ - "maxim,max7320": For the Maxim MAX7320
+ - "maxim,max7321": For the Maxim MAX7321
+ - "maxim,max7322": For the Maxim MAX7322
+ - "maxim,max7323": For the Maxim MAX7323
+ - "maxim,max7324": For the Maxim MAX7324
+ - "maxim,max7325": For the Maxim MAX7325
+ - "maxim,max7326": For the Maxim MAX7326
+ - "maxim,max7327": For the Maxim MAX7327
+ - reg: I2C slave address for this device.
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be 2.
+ - first cell is the GPIO number
+ - second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+ Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+
+Optional properties:
+
+ The I/O expander can detect input state changes, and thus optionally act as
+ an interrupt controller. When the expander interrupt line is connected all the
+ following properties must be set. For more information please see the
+ interrupt controller device tree bindings documentation available at
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+
+ - interrupt-controller: Identifies the node as an interrupt controller.
+ - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
+ - first cell is the pin number
+ - second cell is used to specify flags
+ - interrupt-parent: phandle of the parent interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example 1. MAX7325 with interrupt support enabled (CONFIG_GPIO_MAX732X_IRQ=y):
+
+ expander: max7325@6d {
+ compatible = "maxim,max7325";
+ reg = <0x6d>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+Example 2. MAX7325 with interrupt support disabled (CONFIG_GPIO_MAX732X_IRQ=n):
+
+ expander: max7325@6d {
+ compatible = "maxim,max7325";
+ reg = <0x6d>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
--
1.7.9.5
next prev parent reply other threads:[~2015-01-13 13:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-13 13:41 [PATCH 0/4] gpio: max732x: Update MAX732X driver to use modern kernel API Semen Protsenko
2015-01-13 13:41 ` [PATCH 1/4] gpio: max732x: Add device tree support Semen Protsenko
2015-01-15 16:52 ` Linus Walleij
2015-01-13 13:41 ` [PATCH 2/4] gpio: max732x: Rewrite IRQ code to use irq_domain API Semen Protsenko
2015-01-15 17:03 ` Linus Walleij
2015-01-13 13:41 ` [PATCH 3/4] gpio: max732x: Fix possible deadlock Semen Protsenko
2015-01-15 17:04 ` Linus Walleij
2015-01-13 13:41 ` Semen Protsenko [this message]
2015-01-15 17:19 ` [PATCH 4/4] gpio: max732x: Add DT binding documentation Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421156505-16600-5-git-send-email-semen.protsenko@globallogic.com \
--to=semen.protsenko@globallogic.com \
--cc=devicetree@vger.kernel.org \
--cc=gnurou@gmail.com \
--cc=grant.likely@linaro.org \
--cc=grygorii.strashko@globallogic.com \
--cc=illia.smyrnov@globallogic.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@misterjones.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®