mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Fenghua Yu" <fenghua.yu@intel.com>
To: "H. Peter Anvin" <hpa@linux.intel.com>,
	"Ingo Molnar" <mingo@elte.hu>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Dave Hansen" <dave.hansen@intel.com>,
	"Christoph Lameter" <cl@linux.com>,
	"Glenn Williamson" <glenn.p.williamson@intel.com>
Cc: "linux-kernel" <linux-kernel@vger.kernel.org>,
	"x86" <x86@kernel.org>, "Fenghua Yu" <fenghua.yu@intel.com>
Subject: [PATCH v3] X86-32: Allocate 32 bytes for pgd in PAE paging
Date: Thu, 15 Jan 2015 20:30:01 -0800	[thread overview]
Message-ID: <1421382601-46912-1-git-send-email-fenghua.yu@intel.com> (raw)

From: Fenghua Yu <fenghua.yu@intel.com>

With more embedded systems emerging using Quark, among other things,
32-bit kernel matters again. 32-bit machine and kernel uses PAE paging,
which currently wastes at least 4K of memory per process on Linux where we
have to reserve an entire page to support a single 32-byte PGD structure.
It would be a very good thing if we could eliminate that wastage.

PAE paging is used to access more than 4GB memory on x86-32. And it is
required for NX.

In this patch, we still allocate one page for pgd for a Xen domain and 64-bit
kernel because one page pgd is assumed in these cases. But we can save memory
space by only allocating 32-byte pgd for 32-bit PAE kernel when it is not
running as a Xen domain.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/mm/pgtable.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 78 insertions(+), 3 deletions(-)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 6fb6927..d223e1f 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -271,12 +271,87 @@ static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[])
 	}
 }
 
+/*
+ * Xen paravirt assumes pgd table should be in one page. 64 bit kernel also
+ * assumes that pgd should be in one page.
+ *
+ * But kernel with PAE paging that is not running as a Xen domain
+ * only needs to allocate 32 bytes for pgd instead of one page.
+ */
+#ifdef CONFIG_X86_PAE
+
+#include <linux/slab.h>
+
+#define PGD_SIZE	(PTRS_PER_PGD * sizeof(pgd_t))
+#define PGD_ALIGN	32
+
+static struct kmem_cache *pgd_cache;
+
+static int __init pgd_cache_init(void)
+{
+	/*
+	 * When PAE kernel is running as a Xen domain, it does not use
+	 * shared kernel pmd. And this requires a whole page for pgd.
+	 */
+	if (!SHARED_KERNEL_PMD)
+		return 0;
+
+	/*
+	 * when PAE kernel is not running as a Xen domain, it uses
+	 * shared kernel pmd. Shared kernel pmd does not require a whole
+	 * page for pgd. We are able to just allocate a 32-byte for pgd.
+	 * During boot time, we create a 32-byte slab for pgd table allocation.
+	 */
+	pgd_cache = kmem_cache_create("pgd_cache", PGD_SIZE, PGD_ALIGN,
+				      SLAB_PANIC, NULL);
+	if (!pgd_cache)
+		return -ENOMEM;
+
+	return 0;
+}
+core_initcall(pgd_cache_init);
+
+static inline pgd_t *_pgd_alloc(void)
+{
+	/*
+	 * If no SHARED_KERNEL_PMD, PAE kernel is running as a Xen domain.
+	 * We allocate one page for pgd.
+	 */
+	if (!SHARED_KERNEL_PMD)
+		return (pgd_t *)__get_free_page(PGALLOC_GFP);
+
+	/*
+	 * Now PAE kernel is not running as a Xen domain. We can allocate
+	 * a 32-byte slab for pgd to save memory space.
+	 */
+	return kmem_cache_alloc(pgd_cache, PGALLOC_GFP);
+}
+
+static inline void _pgd_free(pgd_t *pgd)
+{
+	if (!SHARED_KERNEL_PMD)
+		free_page((unsigned long)pgd);
+	else
+		kmem_cache_free(pgd_cache, pgd);
+}
+#else
+static inline pgd_t *_pgd_alloc(void)
+{
+	return (pgd_t *)__get_free_page(PGALLOC_GFP);
+}
+
+static inline void _pgd_free(pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+#endif /* CONFIG_X86_PAE */
+
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *pgd;
 	pmd_t *pmds[PREALLOCATED_PMDS];
 
-	pgd = (pgd_t *)__get_free_page(PGALLOC_GFP);
+	pgd = _pgd_alloc();
 
 	if (pgd == NULL)
 		goto out;
@@ -306,7 +381,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 out_free_pmds:
 	free_pmds(pmds);
 out_free_pgd:
-	free_page((unsigned long)pgd);
+	_pgd_free(pgd);
 out:
 	return NULL;
 }
@@ -316,7 +391,7 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 	pgd_mop_up_pmds(mm, pgd);
 	pgd_dtor(pgd);
 	paravirt_pgd_free(mm, pgd);
-	free_page((unsigned long)pgd);
+	_pgd_free(pgd);
 }
 
 /*
-- 
1.8.1.2


             reply	other threads:[~2015-01-16  4:31 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-16  4:30 Fenghua Yu [this message]
2015-02-19  1:30 ` [tip:x86/mm] x86/mm: Reduce PAE-mode per task pgd allocation overhead from 4K to 32 bytes tip-bot for Fenghua Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421382601-46912-1-git-send-email-fenghua.yu@intel.com \
    --to=fenghua.yu@intel.com \
    --cc=cl@linux.com \
    --cc=dave.hansen@intel.com \
    --cc=glenn.p.williamson@intel.com \
    --cc=hpa@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®