From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751451AbbASH6L (ORCPT ); Mon, 19 Jan 2015 02:58:11 -0500 Received: from mail-pd0-f176.google.com ([209.85.192.176]:40546 "EHLO mail-pd0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751066AbbASH6J (ORCPT ); Mon, 19 Jan 2015 02:58:09 -0500 From: Sneeker Yeh X-Google-Original-From: Sneeker Yeh To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Felipe Balbi , Greg Kroah-Hartman , Mathias Nyman , Grant Likely , Huang Rui , Kishon Vijay Abraham I , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-omap@vger.kernel.org Cc: Andy Green , Jassi Brar , Sneeker Yeh Subject: [PATCH v2 0/5] Add support for Fujitsu USB host controller Date: Mon, 19 Jan 2015 15:56:44 +0800 Message-Id: <1421654209-6486-1-git-send-email-Sneeker.Yeh@tw.fujitsu.com> X-Mailer: git-send-email 1.7.9.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org These patches add support for XHCI compliant Host controller found on Fujitsu Socs, and are based on http://lwn.net/Articles/629162/ The first patch is to add Fujitsu glue layer of Synopsis DesignWare USB3 driver and last four patch is about quirk implementation of errata in Synopsis DesignWare USB3 IP. Patch 1 introduces Fujitsu Specific Glue layer in Synopsis DesignWare USB3 IP driver. Patch 2 is to add a revison number 3.00a of Synopsis DesignWare USB3 IP core driver. Patch 3 introduces using a quirk based on a errata of Synopsis DesignWare USB3 IP which is versions < 3.00a and has hardware configuration DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, which cannot be read from software. As a result this quirk has to be enabled via platform data or device tree. Patch 4 is to set Synopsis quirk in xhci platform driver based on xhci platform data. Patch 5 introduces a quirk with device disconnection management necessary Synopsys Designware USB3 IP with versions < 3.00a and hardware configuration DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. It solves a problem where without the quirk, that host controller will die after a usb device is disconnected from port of root hub. Successfully tested on Fujitsu mb86s7x board. Changes since v1 (RFC): [https://lkml.org/lkml/2014/12/15/929] - based on Arnd's comment, remove entire unnecessary Fujitsu EHCI/OHCI glue, - based on Felipe's comment, fix mis-using of runtime-pm API and setting dma mask, remove unnecessary comment, and refactor suspend/resume handler in Fujitsu Specific Glue layer in dwc3, - based on Felipe's comment, add more commit log and comments in Synopsis quirk implementation, and separate it into four patches. Sneeker Yeh (5): usb: dwc3: add Fujitsu Specific Glue layer usb: dwc3: add revision number DWC3_REVISION_300A usb: dwc3: Add quirk for Synopsis device disconnection errata xhci: Platform: Set Synopsis device disconnection quirk based on platform data xhci: add a quirk for device disconnection errata for Synopsis Designware USB3 core Documentation/devicetree/bindings/usb/dwc3.txt | 17 ++ .../devicetree/bindings/usb/fujitsu-dwc3.txt | 33 ++++ drivers/usb/dwc3/Kconfig | 11 ++ drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/core.c | 6 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/dwc3-mb86s70.c | 206 ++++++++++++++++++++ drivers/usb/dwc3/host.c | 4 + drivers/usb/dwc3/platform_data.h | 1 + drivers/usb/host/xhci-hub.c | 4 + drivers/usb/host/xhci-plat.c | 3 + drivers/usb/host/xhci.c | 29 +++ drivers/usb/host/xhci.h | 24 +++ include/linux/usb/xhci_pdriver.h | 4 + 14 files changed, 345 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt create mode 100644 drivers/usb/dwc3/dwc3-mb86s70.c -- 1.7.9.5