From: Rhyland Klein <rklein@nvidia.com>
To: <ulf.hansson@linaro.org>, <chris@printf.net>
Cc: <swarren@wwwdotorg.org>, <thierry.reding@gmail.com>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<pkunapuli@nvidia.com>, <gnurou@gmail.com>,
Rhyland Klein <rklein@nvidia.com>
Subject: [PATCH] mmc: tegra: Write xfer_mode, CMD regs in together
Date: Tue, 27 Jan 2015 12:23:30 -0500 [thread overview]
Message-ID: <1422379410-7127-1-git-send-email-rklein@nvidia.com> (raw)
From: Pavan Kunapuli <pkunapuli@nvidia.com>
If there is a gap between xfer mode and command register writes,
tegra SDMMC controller can sometimes issue a spurious command before
the CMD register is written. To avoid this, these two registers need
to be written together in a single write operation.
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
---
drivers/mmc/host/sdhci-tegra.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 59797106af93..3d34de47e57e 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -41,6 +41,7 @@
#define NVQUIRK_DISABLE_SDR50 BIT(3)
#define NVQUIRK_DISABLE_SDR104 BIT(4)
#define NVQUIRK_DISABLE_DDR50 BIT(5)
+#define NVQUIRK_SHADOW_XFER_MODE_REG BIT(6)
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
@@ -67,6 +68,32 @@ static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
return readw(host->ioaddr + reg);
}
+static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_tegra *tegra_host = pltfm_host->priv;
+ const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
+
+ if (soc_data->nvquirks * NVQUIRK_SHADOW_XFER_MODE_REG) {
+ switch (reg) {
+ case SDHCI_TRANSFER_MODE:
+ /*
+ * Postpone this write, we must do it together with a
+ * command write that is down below.
+ */
+ pltfm_host->xfer_mode_shadow = val;
+ return;
+ case SDHCI_COMMAND:
+ writel((val << 16) | pltfm_host->xfer_mode_shadow,
+ host->ioaddr + SDHCI_TRANSFER_MODE);
+ pltfm_host->xfer_mode_shadow = 0;
+ return;
+ }
+ }
+
+ writew(val, host->ioaddr + reg);
+}
+
static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -147,6 +174,7 @@ static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width)
static const struct sdhci_ops tegra_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
+ .write_w = tegra_sdhci_writew,
.write_l = tegra_sdhci_writel,
.set_clock = sdhci_set_clock,
.set_bus_width = tegra_sdhci_set_bus_width,
@@ -201,7 +229,8 @@ static struct sdhci_tegra_soc_data soc_data_tegra114 = {
.pdata = &sdhci_tegra114_pdata,
.nvquirks = NVQUIRK_DISABLE_SDR50 |
NVQUIRK_DISABLE_DDR50 |
- NVQUIRK_DISABLE_SDR104,
+ NVQUIRK_DISABLE_SDR104 |
+ NVQUIRK_SHADOW_XFER_MODE_REG,
};
static const struct of_device_id sdhci_tegra_dt_match[] = {
--
1.7.9.5
next reply other threads:[~2015-01-27 17:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-27 17:23 Rhyland Klein [this message]
2015-01-28 6:06 ` Alexandre Courbot
2015-01-28 16:30 ` Rhyland Klein
2015-02-09 6:22 ` Alexandre Courbot
2015-02-10 7:44 ` Ulf Hansson
2015-01-28 15:02 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422379410-7127-1-git-send-email-rklein@nvidia.com \
--to=rklein@nvidia.com \
--cc=chris@printf.net \
--cc=gnurou@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pkunapuli@nvidia.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome