From: "K. Y. Srinivasan" <kys@microsoft.com>
To: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
devel@linuxdriverproject.org, olaf@aepfle.de, apw@canonical.com,
vkuznets@redhat.com, tglx@linutronix.de
Cc: Jake Oshins <"[mailto:jakeo@microsoft.com]"@linuxonhyperv.com>,
Jake Oshins <jakeo@microsoft.com>,
"K. Y. Srinivasan" <kys@microsoft.com>
Subject: [PATCH RESEND 3/8] drivers:hv:vmbus drivers:hv:vmbus Allow for more than one MMIO range for children
Date: Tue, 27 Jan 2015 15:46:43 -0800 [thread overview]
Message-ID: <1422402408-5504-3-git-send-email-kys@microsoft.com> (raw)
In-Reply-To: <1422402408-5504-1-git-send-email-kys@microsoft.com>
From: Jake Oshins <[mailto:jakeo@microsoft.com]>
This set of changes finds the _CRS object in the ACPI namespace
that contains memory address space descriptors, intended to convey
to VMBus which ranges of memory-mapped I/O space are available for
child devices, and then builds a resource list that contains all
those ranges. Without this change, only some of the memory-mapped
I/O space will be available for child devices, and only in some
virtual BIOS configurations (Generation 2 VMs).
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
---
drivers/hv/vmbus_drv.c | 97 +++++++++++++++++++++++++++++++++------
drivers/video/fbdev/hyperv_fb.c | 2 +-
include/linux/hyperv.h | 2 +-
3 files changed, 85 insertions(+), 16 deletions(-)
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index e334ccc..aebc8fe 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -45,10 +45,7 @@ static struct tasklet_struct msg_dpc;
static struct completion probe_event;
static int irq;
-struct resource hyperv_mmio = {
- .name = "hyperv mmio",
- .flags = IORESOURCE_MEM,
-};
+struct resource *hyperv_mmio;
EXPORT_SYMBOL_GPL(hyperv_mmio);
static int vmbus_exists(void)
@@ -915,30 +912,98 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
+ * VMBUS is an acpi enumerated device. Get the information we
* need from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
{
+ resource_size_t start = 0;
+ resource_size_t end = 0;
+ struct resource *new_res;
+ struct resource **old_res = &hyperv_mmio;
+
switch (res->type) {
case ACPI_RESOURCE_TYPE_IRQ:
irq = res->data.irq.interrupts[0];
+ return AE_OK;
+
+ /*
+ * "Address" descriptors are for bus windows. Ignore
+ * "memory" descriptors, which are for registers on
+ * devices.
+ */
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ start = res->data.address32.address.minimum;
+ end = res->data.address32.address.maximum;
break;
case ACPI_RESOURCE_TYPE_ADDRESS64:
- hyperv_mmio.start = res->data.address64.address.minimum;
- hyperv_mmio.end = res->data.address64.address.maximum;
+ start = res->data.address64.address.minimum;
+ end = res->data.address64.address.maximum;
break;
+
+ default:
+ /* Unused resource type */
+ return AE_OK;
+
}
+ /*
+ * Ignore ranges that are below 1MB, as they're not
+ * necessary or useful here.
+ */
+ if (end < 0x100000)
+ return AE_OK;
+
+ new_res = kzalloc(sizeof(*new_res), GFP_ATOMIC);
+ if (!new_res)
+ return AE_NO_MEMORY;
+
+ new_res->name = "hyperv mmio";
+ new_res->flags = IORESOURCE_MEM;
+ new_res->start = start;
+ new_res->end = end;
+
+ do {
+ if (!*old_res) {
+ *old_res = new_res;
+ break;
+ }
+
+ if ((*old_res)->start > new_res->end) {
+ new_res->sibling = *old_res;
+ *old_res = new_res;
+ break;
+ }
+
+ old_res = &(*old_res)->sibling;
+
+ } while (1);
return AE_OK;
}
+static int vmbus_acpi_remove(struct acpi_device *device)
+{
+ struct resource *cur_res;
+ struct resource *next_res;
+
+ if (hyperv_mmio) {
+ release_resource(hyperv_mmio);
+ for (cur_res = hyperv_mmio; cur_res; cur_res = next_res) {
+ next_res = cur_res->sibling;
+ kfree(cur_res);
+ }
+ }
+
+ return 0;
+}
+
static int vmbus_acpi_add(struct acpi_device *device)
{
acpi_status result;
int ret_val = -ENODEV;
+ struct acpi_device *ancestor;
hv_acpi_dev = device;
@@ -948,23 +1013,26 @@ static int vmbus_acpi_add(struct acpi_device *device)
if (ACPI_FAILURE(result))
goto acpi_walk_err;
/*
- * The parent of the vmbus acpi device (Gen2 firmware) is the VMOD that
- * has the mmio ranges. Get that.
+ * Some ancestor of the vmbus acpi device (Gen1 or Gen2
+ * firmware) is the VMOD that has the mmio ranges. Get that.
*/
- if (device->parent) {
- result = acpi_walk_resources(device->parent->handle,
+ for (ancestor = device->parent; ancestor; ancestor = ancestor->parent) {
+ result = acpi_walk_resources(ancestor->handle,
METHOD_NAME__CRS,
vmbus_walk_resources, NULL);
if (ACPI_FAILURE(result))
- goto acpi_walk_err;
- if (hyperv_mmio.start && hyperv_mmio.end)
- request_resource(&iomem_resource, &hyperv_mmio);
+ continue;
+ if (hyperv_mmio) {
+ request_resource(&iomem_resource, hyperv_mmio);
+ break;
+ }
}
ret_val = 0;
acpi_walk_err:
complete(&probe_event);
+ vmbus_acpi_remove(device);
return ret_val;
}
@@ -980,6 +1048,7 @@ static struct acpi_driver vmbus_acpi_driver = {
.ids = vmbus_acpi_device_ids,
.ops = {
.add = vmbus_acpi_add,
+ .remove = vmbus_acpi_remove,
},
};
diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index 4254336..003c8f0 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -686,7 +686,7 @@ static int hvfb_getmem(struct fb_info *info)
par->mem.name = KBUILD_MODNAME;
par->mem.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (gen2vm) {
- ret = allocate_resource(&hyperv_mmio, &par->mem,
+ ret = allocate_resource(hyperv_mmio, &par->mem,
screen_fb_size,
0, -1,
screen_fb_size,
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 26a32b7..e73cfeb 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1217,7 +1217,7 @@ int hv_vss_init(struct hv_util_service *);
void hv_vss_deinit(void);
void hv_vss_onchannelcallback(void *);
-extern struct resource hyperv_mmio;
+extern struct resource *hyperv_mmio;
/*
* Negotiated version with the Host.
--
1.7.4.1
next prev parent reply other threads:[~2015-01-27 22:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-27 23:46 [PATCH 0/8] Drivers: hv: vmbus: Enable unloading of vmbus driver K. Y. Srinivasan
2015-01-27 23:46 ` [PATCH RESEND 1/8] Drivers: hv: vmbus: prevent cpu offlining on newer hypervisors K. Y. Srinivasan
2015-01-27 23:46 ` [PATCH RESEND 2/8] Drivers: hv: vmbus: rename channel work queues K. Y. Srinivasan
2015-01-27 23:46 ` K. Y. Srinivasan [this message]
2015-01-27 23:46 ` [PATCH RESEND 4/8] Drivers: hv: vmbus: avoid double kfree for device_obj K. Y. Srinivasan
2015-01-27 23:46 ` [PATCH RESEND 5/8] Drivers: hv: vmbus: teardown hv_vmbus_con workqueue and vmbus_connection pages on shutdown K. Y. Srinivasan
2015-01-27 23:46 ` [PATCH RESEND 6/8] drivers: hv: vmbus: Teardown synthetic interrupt controllers on module unload K. Y. Srinivasan
2015-01-27 23:46 ` [PATCH RESEND 7/8] clockevents: export clockevents_unbind_device instead of clockevents_unbind K. Y. Srinivasan
2015-01-27 23:46 ` [PATCH RESEND 8/8] Drivers: hv: vmbus: Teardown clockevent devices on module unload K. Y. Srinivasan
2015-01-28 22:16 ` [PATCH RESEND 1/8] Drivers: hv: vmbus: prevent cpu offlining on newer hypervisors KY Srinivasan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422402408-5504-3-git-send-email-kys@microsoft.com \
--to=kys@microsoft.com \
--cc="[mailto:jakeo@microsoft.com]"@linuxonhyperv.com \
--cc=apw@canonical.com \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=jakeo@microsoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=olaf@aepfle.de \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome