mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chenhui Zhao <chenhui.zhao@freescale.com>
To: <linux-kernel@vger.kernel.org>, <kernel@pengutronix.de>,
	<linux-arm-kernel@lists.infradead.org>
Cc: <leoli@freescale.com>, <Jason.Jin@freescale.com>
Subject: [PATCH 2/4] arm: ls1021a: add dts nodes required by deep sleep
Date: Fri, 30 Jan 2015 20:22:19 +0800	[thread overview]
Message-ID: <1422620541-6843-2-git-send-email-chenhui.zhao@freescale.com> (raw)
In-Reply-To: <1422620541-6843-1-git-send-email-chenhui.zhao@freescale.com>

Add RCPM and DCSR nodes.

Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts |   6 +-
 arch/arm/boot/dts/ls1021a.dtsi    | 117 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 9c5e16b..6903f43 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -157,7 +157,7 @@
 	fpga: board-control@3,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "simple-bus";
+		compatible = "fsl,ls1021aqds-fpga", "simple-bus";
 		reg = <0x3 0x0 0x0000100>;
 		bank-width = <1>;
 		device-width = <1>;
@@ -238,3 +238,7 @@
 &uart1 {
 	status = "okay";
 };
+
+&rcpm {
+	fsl,deep-sleep;
+};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..0c51ce0 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -183,6 +183,11 @@
 			};
 		};
 
+		rcpm: rcpm@1ee2000 {
+			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1";
+			reg = <0x0 0x1ee2000 0x0 0x10000>;
+		};
+
 		dspi0: dspi@2100000 {
 			compatible = "fsl,vf610-dspi";
 			#address-cells = <1>;
@@ -406,4 +411,116 @@
 			dr_mode = "host";
 		};
 	};
+
+	dcsr {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+		ranges = <0x0 0x0 0x20000000 0x1000000>;
+
+		dcsr-epu@0 {
+			compatible = "fsl,ls1021a-dcsr-epu";
+			reg = <0x0 0x10000>;
+		};
+
+		dcsr-gdi@100000 {
+			compatible = "fsl,ls1021a-dcsr-gdi";
+			reg = <0x100000 0x10000>;
+		};
+
+		dcsr-dddi@120000 {
+			compatible = "fsl,ls1021a-dcsr-dddi";
+			reg = <0x120000 0x10000>;
+		};
+
+		dcsr-dcfg@220000 {
+			compatible = "fsl,ls1021a-dcsr-dcfg";
+			reg = <0x220000 0x1000>;
+		};
+
+		dcsr-clock@221000 {
+			compatible = "fsl,ls1021a-dcsr-clock";
+			reg = <0x221000 0x1000>;
+		};
+
+		dcsr-rcpm@222000 {
+			compatible = "fsl,ls1021a-dcsr-rcpm";
+			reg = <0x222000 0x1000 0x223000 0x1000>;
+		};
+
+		dcsr-ccp@225000 {
+			compatible = "fsl,ls1021a-dcsr-ccp";
+			reg = <0x225000 0x1000>;
+		};
+
+		dcsr-fusectrl@226000 {
+			compatible = "fsl,ls1021a-dcsr-fusectrl";
+			reg = <0x226000 0x1000>;
+		};
+
+		dcsr-dap@300000 {
+			compatible = "fsl,ls1021a-dcsr-dap";
+			reg = <0x300000 0x10000>;
+		};
+
+		dcsr-cstf@350000 {
+			compatible = "fsl,ls1021a-dcsr-cstf";
+			reg = <0x350000 0x1000 0x3a7000 0x1000>;
+		};
+
+		dcsr-a7rom@360000 {
+			compatible = "fsl,ls1021a-dcsr-a7rom";
+			reg = <0x360000 0x10000>;
+		};
+
+		dcsr-a7cpu@370000 {
+			compatible = "fsl,ls1021a-dcsr-a7cpu";
+			reg = <0x370000 0x8000>;
+		};
+
+		dcsr-a7cti@378000 {
+			compatible = "fsl,ls1021a-dcsr-a7cti";
+			reg = <0x378000 0x4000>;
+		};
+
+		dcsr-etm@37c000 {
+			compatible = "fsl,ls1021a-dcsr-etm";
+			reg = <0x37c000 0x1000 0x37d000 0x3000>;
+		};
+
+		dcsr-hugorom@3a0000 {
+			compatible = "fsl,ls1021a-dcsr-hugorom";
+			reg = <0x3a0000 0x1000>;
+		};
+
+		dcsr-etf@3a1000 {
+			compatible = "fsl,ls1021a-dcsr-etf";
+			reg = <0x3a1000 0x1000 0x3a2000 0x1000>;
+		};
+
+		dcsr-etr@3a3000 {
+			compatible = "fsl,ls1021a-dcsr-etr";
+			reg = <0x3a3000 0x1000>;
+		};
+
+		dcsr-cti@3a4000 {
+			compatible = "fsl,ls1021a-dcsr-cti";
+			reg = <0x3a4000 0x1000 0x3a5000 0x1000 0x3a6000 0x1000>;
+		};
+
+		dcsr-atbrepl@3a8000 {
+			compatible = "fsl,ls1021a-dcsr-atbrepl";
+			reg = <0x3a8000 0x1000>;
+		};
+
+		dcsr-tsgen-ctrl@3a9000 {
+			compatible = "fsl,ls1021a-dcsr-tsgen-ctrl";
+			reg = <0x3a9000 0x1000>;
+		};
+
+		dcsr-tsgen-read@3aa000 {
+			compatible = "fsl,ls1021a-dcsr-tsgen-read";
+			reg = <0x3aa000 0x1000>;
+		};
+	};
 };
-- 
1.9.1


  reply	other threads:[~2015-01-30 12:22 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-30 12:22 [PATCH 1/4] fsl: add EPU FSM configuration for " Chenhui Zhao
2015-01-30 12:22 ` Chenhui Zhao [this message]
2015-01-30 12:22 ` [PATCH 3/4] arm: ls1021a: add deep sleep support Chenhui Zhao
2015-01-30 12:22 ` [PATCH 4/4] arm: ls1021a: set wakeup devices dynamically for sleep/deep sleep Chenhui Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422620541-6843-2-git-send-email-chenhui.zhao@freescale.com \
    --to=chenhui.zhao@freescale.com \
    --cc=Jason.Jin@freescale.com \
    --cc=kernel@pengutronix.de \
    --cc=leoli@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®