mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/9] phy: ti-pipe3: Disable clocks on system suspend
Date: Sat, 31 Jan 2015 19:58:08 +0530	[thread overview]
Message-ID: <1422714496-423-2-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1422714496-423-1-git-send-email-kishon@ti.com>

From: Roger Quadros <rogerq@ti.com>

On system suspend, the runtime_suspend() driver hook doesn't get
called for USB phy and so the clocks are not disabled in the driver.
This causes the L3INIT_960M_GFCLK and L3INIT_480M_GFCLK to remain
active on the DRA7 platform while in system suspend.

In case of pcie-phy, the runtime_suspend hook gets called after
the suspend hook so we introduce a flag phy->enabled to keep
track if our clocks are enabled or not to prevent multiple
enable/disables.

Add suspend/resume hooks to the driver.
Move enabling/disabling clock code into helper functions.

Reported-by: Nishant Menon <nm@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-ti-pipe3.c |   99 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 77 insertions(+), 22 deletions(-)

diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 465de2c..8c85468 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
+#include <linux/spinlock.h>
 
 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
@@ -82,6 +83,8 @@ struct ti_pipe3 {
 	struct clk		*refclk;
 	struct clk		*div_clk;
 	struct pipe3_dpll_map	*dpll_map;
+	bool			enabled;
+	spinlock_t		lock;	/* serialize clock enable/disable */
 };
 
 static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -307,6 +310,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	phy->dev		= &pdev->dev;
+	spin_lock_init(&phy->lock);
 
 	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
 		match = of_match_device(of_match_ptr(ti_pipe3_id_table),
@@ -427,24 +431,14 @@ static int ti_pipe3_remove(struct platform_device *pdev)
 
 #ifdef CONFIG_PM
 
-static int ti_pipe3_runtime_suspend(struct device *dev)
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
 {
-	struct ti_pipe3	*phy = dev_get_drvdata(dev);
-
-	if (!IS_ERR(phy->wkupclk))
-		clk_disable_unprepare(phy->wkupclk);
-	if (!IS_ERR(phy->refclk))
-		clk_disable_unprepare(phy->refclk);
-	if (!IS_ERR(phy->div_clk))
-		clk_disable_unprepare(phy->div_clk);
-
-	return 0;
-}
+	int ret = 0;
+	unsigned long flags;
 
-static int ti_pipe3_runtime_resume(struct device *dev)
-{
-	u32 ret = 0;
-	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->enabled)
+		goto err1;
 
 	if (!IS_ERR(phy->refclk)) {
 		ret = clk_prepare_enable(phy->refclk);
@@ -469,6 +463,9 @@ static int ti_pipe3_runtime_resume(struct device *dev)
 			goto err3;
 		}
 	}
+
+	phy->enabled = true;
+	spin_unlock_irqrestore(&phy->lock, flags);
 	return 0;
 
 err3:
@@ -480,19 +477,77 @@ err2:
 		clk_disable_unprepare(phy->refclk);
 
 err1:
+	spin_unlock_irqrestore(&phy->lock, flags);
+	return ret;
+}
+
+static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&phy->lock, flags);
+	if (!phy->enabled) {
+		spin_unlock_irqrestore(&phy->lock, flags);
+		return;
+	}
+
+	if (!IS_ERR(phy->wkupclk))
+		clk_disable_unprepare(phy->wkupclk);
+	if (!IS_ERR(phy->refclk))
+		clk_disable_unprepare(phy->refclk);
+	if (!IS_ERR(phy->div_clk))
+		clk_disable_unprepare(phy->div_clk);
+	phy->enabled = false;
+	spin_unlock_irqrestore(&phy->lock, flags);
+}
+
+static int ti_pipe3_runtime_suspend(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+
+	ti_pipe3_disable_clocks(phy);
+	return 0;
+}
+
+static int ti_pipe3_runtime_resume(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = ti_pipe3_enable_clocks(phy);
 	return ret;
 }
 
+static int ti_pipe3_suspend(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+
+	ti_pipe3_disable_clocks(phy);
+	return 0;
+}
+
+static int ti_pipe3_resume(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	int ret;
+
+	ret = ti_pipe3_enable_clocks(phy);
+	if (ret)
+		return ret;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	return 0;
+}
+#endif
+
 static const struct dev_pm_ops ti_pipe3_pm_ops = {
 	SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
 			   ti_pipe3_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
 };
 
-#define DEV_PM_OPS     (&ti_pipe3_pm_ops)
-#else
-#define DEV_PM_OPS     NULL
-#endif
-
 #ifdef CONFIG_OF
 static const struct of_device_id ti_pipe3_id_table[] = {
 	{
@@ -520,7 +575,7 @@ static struct platform_driver ti_pipe3_driver = {
 	.remove		= ti_pipe3_remove,
 	.driver		= {
 		.name	= "ti-pipe3",
-		.pm	= DEV_PM_OPS,
+		.pm	= &ti_pipe3_pm_ops,
 		.of_match_table = of_match_ptr(ti_pipe3_id_table),
 	},
 };
-- 
1.7.9.5


  reply	other threads:[~2015-01-31 14:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-31 14:28 [GIT PULL 0/9] phy: for 3.20 merge window Kishon Vijay Abraham I
2015-01-31 14:28 ` Kishon Vijay Abraham I [this message]
2015-01-31 14:28 ` [PATCH 2/9] phy: ti-pipe3: Fix SATA across suspend/resume Kishon Vijay Abraham I
2015-01-31 14:28 ` [PATCH 3/9] phy: fix return value check in armada375_usb_phy_probe() Kishon Vijay Abraham I
2015-01-31 14:28 ` [PATCH 4/9] phy: miphy28lp: Pass sysconfig register offsets via syscfg dt property Kishon Vijay Abraham I
2015-01-31 14:28 ` [PATCH 5/9] phy: phy-stih407-usb: Pass sysconfig register offsets via syscfg property Kishon Vijay Abraham I
2015-01-31 14:28 ` [PATCH 6/9] Documentation: bindings: add dt documentation for Rockchip usb PHY Kishon Vijay Abraham I
2015-01-31 14:28 ` [PATCH 7/9] phy: add a driver for the Rockchip SoC internal USB2.0 PHY Kishon Vijay Abraham I
2015-01-31 14:28 ` [PATCH 8/9] phy: exynos-video-mipi: Fix regression by adding support for PMU regmap Kishon Vijay Abraham I
2015-01-31 14:28 ` [PATCH 9/9] phy: miphy365x: Pass sysconfig register offsets via syscfg dt property Kishon Vijay Abraham I
2015-01-31 16:54 ` [GIT PULL 0/9] phy: for 3.20 merge window Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422714496-423-2-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome