From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Rob Herring <robh+dt@kernel.org>,
Grant Likely <grant.likely@linaro.org>,
Kishon Vijay Abraham I <kishon@ti.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v4 2/5] ARM: dts: sun9i: Add USB host controller nodes to a80 dtsi
Date: Tue, 3 Feb 2015 06:22:02 +0800 [thread overview]
Message-ID: <1422915725-26492-3-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422915725-26492-1-git-send-email-wens@csie.org>
The A80 has 3 EHCI/OHCI USB controllers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index d7ebd9390b01..17fcf57d09cb 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -355,6 +355,28 @@
*/
ranges = <0 0 0 0x20000000>;
+ ehci0: usb@00a00000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a00000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 1>;
+ resets = <&usb_mod_clk 17>;
+ phys = <&usbphy1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@00a00400 {
+ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+ reg = <0x00a00400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
+ resets = <&usb_mod_clk 17>;
+ phys = <&usbphy1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
usbphy1: phy@00a00800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a00800 0x4>;
@@ -366,6 +388,17 @@
#phy-cells = <0>;
};
+ ehci1: usb@00a01000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a01000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 3>;
+ resets = <&usb_mod_clk 18>;
+ phys = <&usbphy2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
usbphy2: phy@00a01800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a01800 0x4>;
@@ -380,6 +413,28 @@
phy_type = "hsic";
};
+ ehci2: usb@00a02000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a02000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 5>;
+ resets = <&usb_mod_clk 19>;
+ phys = <&usbphy3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@00a02400 {
+ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+ reg = <0x00a02400 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
+ resets = <&usb_mod_clk 19>;
+ phys = <&usbphy3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
usbphy3: phy@00a02800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a02800 0x4>;
--
2.1.4
next prev parent reply other threads:[~2015-02-02 22:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-02 22:22 [PATCH v4 0/5] ARM: sun9i: Add USB host controller support for A80 Chen-Yu Tsai
2015-02-02 22:22 ` [PATCH v4 1/5] phy: Add driver to support individual USB PHYs on sun9i Chen-Yu Tsai
2015-02-02 22:22 ` Chen-Yu Tsai [this message]
2015-02-02 22:22 ` [PATCH v4 3/5] ARM: dts: sun9i: Enable USB support on A80 Optimus board Chen-Yu Tsai
2015-02-02 22:22 ` [PATCH v4 4/5] ARM: sunxi_defconfig: Enable CONFIG_PHY_SUN9I_USB Chen-Yu Tsai
2015-02-02 22:22 ` [PATCH v4 5/5] ARM: multi_v7_defconfig: " Chen-Yu Tsai
2015-02-07 15:44 ` [PATCH v4 0/5] ARM: sun9i: Add USB host controller support for A80 Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422915725-26492-3-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®